1070 coated aluminum coilThe 1070 coated aluminum coil content aluminum reach 99.7%, , so it is a kind of pure aluminum product. Our 1070 coated aluminum coils are the materials used in the manufacture of some structure with specific performance, it is with high plasticity, thermal conductivity characteristics and good electrical conductivity. Adopted Standards
BS EN 485-2, BS EN 573-3, ASTM-B-209M, YS/T429.2-2000, GB/T3880-2008 Capacity & Availability 1070 O/H12/H18/H22/H24/H28/H32/H34/H14/H16
Coating type: PE (polyester) coating, PVDF coating, Nano PVDF coating, FEVE coating
Gloss of our coated aluminum: 10~90% (EN ISO-2813: 1994)
Paint colors: RAL, NCS, Pantone etc. or on request
Paint brand: Normally PPG and Beckers / as requested
Anti-abrade: abrasion coefficientâ?¥1.6L/um after sand trail
Coating thickness: PE coating�18mic; PVDF coating�25mic; premier�5mic, tolerance ±0.002 mm
1070 coated aluminum coil thickness: 0.08~6.0 mm and normally 1.0~3.0 mm, Mirach Coating's tolerance ±3% Width Tolerances for our 1070 coated aluminum coil:Specified Thickness(Inches)Specified Width (inches)Up Thru 6Over 6Over 12Over 24Thru 12Thru 24Thru 480.006-0.1250.0101/641/323/640.126-0.1860.0121/321/321/16 Chemical Composition of our 1070 coated aluminum coil:GradeSiFeCuMnMgCrNiZnAl10700.200.250.040.030.03--0.0499.7 Features & Applications
Mirach Coating's 1070 coated aluminum coil has excellent corrosion resistance andsatisfactory anodizing and conversion coating finishing characteristics.For its features above, 1070 coated aluminum coil are widely used in many fields, such as Building wall, roofing, furniture cabinet, lighting plate, Shipping plate, solar reflective plate, Corner protector, Beverage bottle, cap, ring-pull, cosmetics shell and cover. Packing & Ordering
MOQ: 5 MT per spec
Essential info for inquiry: alloy & temper, detailed sizes, coating thickness/color, final usage
Coil id.: 150mm / 405mm / 505mm / 508mm / 510mm
Packing for the coating aluminum coils:   Inner Core: Paper Tube  Outer: Paperboard  Wooden Pallet
Weight per coil: 1~6 MT per coil as requested
3003 coated aluminum coil3003 coated aluminum coil is a most commonly item produced by Mirach Coating since two decades ago, which has good combination of strength and formability, anodizing behavior and corrosion resistance. Our 3003 coated aluminum coil is widely used for building industry, such as roofing and sidings, ceilings, corrugated sheets, good for insulation of heating and cooling. Adopted Standards
YS/T429.2-2000, BS EN 485-2, GB/T3880-2008, ASTM-B-209M, BS EN 573-3 Detailed Specifications:
AA 3003 HO / H12 / H22 / H24 / H26 / H28 / H44/ H14 / H16 / H18
Raw coil of our 3003 coated aluminum coil: Both CC and DC are acceptable
Coating brand: Beckers/PPG/ as requested
Paint colors: NCS, Pantone, RAL etc. / on request
Color coating guarantee for 3003 coated aluminum coil: 15~20 years
Gloss: 10~90% (EN ISO-2813: 1994)
Precise slitting service available: min. 20 mm
Protective film: on request
Coating thickness of our 3003 coated aluminum coil: PVDF 25mic; premier 5mic; PE paint 18mic; tolerance ±0.002 mm, Chemical Composition of 3003 coated aluminum coilAlloySiFeCuMnMgCrZnTiOtherAlSingleTotal30030.60.70.05~0.201.0~1.5__0.1_0.050.15Remainder Features & Applications
Our 3003 coated aluminum coil characterized with high gloss, wide range of color, good mechanical processing performance are widely used in following building:
Interior: Wall cladding (lamination), ceilings, bathrooms, kitchens ceiling.
Exterior: Wall cladding, facades, roofing, venetian blinds, louverAdvertisement applications: Signage, billboards, shopping advertising boards. Ordering & Packing
MOQ for coated coils: 5 MT per spec
Coil id.: 150mm / 510mm/405mm / 508mm/ 505mm
Coil OD. Of our coil: max. Reach 1750 mm
Mirach Coating's Packing: protection and wooden pallets with fumigation for seaworthy
Teardrop Pallet Racking is another kind of pallet racking as customer's request.It is very popular for American market,step beam and wire deck are available according the using request.Pitch of upright is 2 inch(50.8mm).
1. Style: Pallet style, easy installation and adjustable.
2. Certification:CE, ISO9001:2008
3. Regular size/unit:(L) 2,700 x (W) 1,050 x (H) 5,025mm, 4 levels loading, Loading: 2500kg/level
4. Customized sizes accepted:Yes
5. Adjustable size:75mm
6. Standard color:Blue, orange, green, red, grey
7. special color available: Yes
8. MQQ:10 units
9. Delivery time : 7 -15days for 2*40' containers
10. Standard exporting package:Metal strip, film, paper board and master carton.
Custom aluminum extrusion 6061/6063 profile with size up to 500mm in width, 350mm in diameter
36 aluminum extrusion lines with largest extruders of 4500tons
More than 20 years' experience in aluminum extrusion customization
Heat sink extrusion supplier for huawei, gree, media, foxconn.....
Extrusion die making: 7--10 days
Mass production: 10---15 days
800, 000 square meters factory with iso certification.
More than 1, 000 well-trained employees.
More than 15, 000 tons per month output production capacity.
Customization procedure: send us samples or drawing-- we draw cad--confirmation--extrusion die making---samples confirmation--mass production
Aluminum tubes are divided into the following categories
1.According to the shape points: square tube, tube, pattern tube, shaped tube, global aluminum tube.
2.According to the extrusion method points: seamless aluminum tube and ordinary extrusion tube
3.According to the precision points: ordinary aluminum tubes and precision aluminum tubes, including precision aluminum tubes generally need to be processed after the extrusion, such as cold drawn fine pumping, rolling.
4.Thickness by: ordinary aluminum and thin-walled aluminum tube
5.Performance: corrosion resistance, light weight.
(3) Copper tube C1100, C12200, C44300, C68700, C70600, C71500, CuNi90/10, 70/10,70/20,70/30 etc.
Fin Length:130mm~180m
Fin OD:25mm~82mm
Fin/inch: 5-12
Fin thickness: 0.2mm~1mm
Fin height: 3mm~16.2mm
Fin material: aluminum 1060, 1050, 1070
Fin type: extruded
Function
(1)Energy conservation;
(2) Long time using;
(3) Light than steel fin;
(4) High heat transfer;
Copper C1100,C12200 extruded finned tubes, spiral fin tubes for air condenser and heat exchanger
Extruded Fin Tube
Fin material: Aluminium 1060,1050, 1070, 6063,6061,3003
fin type: extruded,
Fin size: OD25mm~OD85mm,
fin thickness:0.25mm~1mm,
fin per inch: 5~12;
Fin Length: 300mm~18000mm;
Base tube material: SA179, SA789 S31803, SS304,SS316L, SA334, SA249, C44300, C68700, C71500, C70600, C12200, UNS8800,UNS4400, IN825,Titalium etc.
Manufacture:
A core tube is fitted into an aluminium primary tube. This assembly is then fed into the triple-spindle finning machine. Three special multi-disc packs extrude the aluminium tube into helical high fins while reducing the inner diameter to give firm pressure contact with the core tube.
Application:
*Air water cooler unit
*Product coolers - gas, chemicals, petrochemicals, oil etc.
*Heat exchangers
*Boiler,Dryer
*Air condtioner, Air condenser
Extruded Fin Tube
Fin material: Aluminium 1060,1050, 1070, 6063,6061,3003
fin type: extruded,
Fin size: OD25mm~OD85mm,
fin thickness:0.25mm~1mm,
fin per inch: 5~12;
Fin Length: 300mm~18000mm;
Base tube material: SA179, SA789 S31803, SS304,SS316L, SA334, SA249, C44300, C68700, C71500, C70600, C12200, UNS8800,UNS4400, IN825,Titalium etc.
Manufacture:
A core tube is fitted into an aluminium primary tube. This assembly is then fed into the triple-spindle finning machine. Three special multi-disc packs extrude the aluminium tube into helical high fins while reducing the inner diameter to give firm pressure contact with the core tube.
Application:
*Air water cooler unit
*Product coolers - gas, chemicals, petrochemicals, oil etc.
*Heat exchangers
*Boiler,Dryer
*Air condtioner, Air condenser
MY heat transfer technology is a professional manufacturer of industrial fin tubes, widely used in Dryer, Air/Oil-cooler, heater, heat recovery, heat exchanger etc., which is by adding the fins on the surface area or surface area of the heat exchange tube, so as to improve the thermal efficiency.
Extruded Fin Tube
Fin material: Aluminium 1060,1050, 1070, 6063,6061,3003
fin type: extruded,
Fin size: OD25mm~OD85mm,
fin thickness:0.25mm~1mm,
fin per inch: 5~12;
Fin Length: 300mm~18000mm;
Base tube material: SA179, SA789 S31803, SS304,SS316L, SA334, SA249, C44300, C68700, C71500, C70600, C12200, UNS8800,UNS4400, IN825,Titalium etc.
Manufacture:
A core tube is fitted into an aluminium primary tube. This assembly is then fed into the triple-spindle finning machine. Three special multi-disc packs extrude the aluminium tube into helical high fins while reducing the inner diameter to give firm pressure contact with the core tube.
My heat transfer technology is a professional manufacturer of industrial fin tubes, widely used in dryer, air/oil-cooler, heater, heat recovery, heat exchanger etc., which is by adding the fins on the surface area or surface area of the heat exchange tube, so as to improve the thermal efficiency.
Extruded fin tube
Fin material: aluminium 1060, 1050, 1070, 6063, 6061, 3003
Fin type: extruded,
Fin size: od25mm~od85mm,
Fin thickness:0.25mm~1mm,
Fin per inch: 5~12;
Fin length: 300mm~18000mm;
Base tube material: sa179, sa789 s31803, ss304, ss316l, sa334, sa249, c44300, c68700, c71500, c70600, c12200, uns8800, uns4400, in825, titalium etc.
Manufacture:
A core tube is fitted into an aluminium primary tube. This assembly is then fed into the triple-spindle finning machine. Three special multi-disc packs extrude the aluminium tube into helical high fins while reducing the inner diameter to give firm pressure contact with the core tube.
(3) copper tube c1100, c12200, c44300, c68700, c70600, c71500, cuni90/10, 70/10, 70/20, 70/30 etc.
Fin length:130mm~180m
Fin od:25mm~82mm
Fin/inch: 5-12
Fin thickness: 0.2mm~1mm
Fin height: 3mm~16.2mm
Fin material: aluminum 1060, 1050, 1070
Fin type: extruded
Function
(1)energy conservation;
(2) long time using;
(3) light than steel fin;
(4) high heat transfer;
Copper c1100, c12200 extruded finned tubes, spiral fin tubes for air condenser and heat exchanger
High frequency welded fin tube, crimped fin tube, serrated fin tube
Fin material: Carbon steel Q235, SPCC,08FeAl,TP304, TP316,TP409 etc,
fin type: welded, L
Fin thickness:0.3mm~3mm,
Base tube material: SA179, SA106B,SA192, SA53,SA334, SA335, SS304,SS316L, etc.
Application:
*Air water cooler unit
*Product coolers - gas, chemicals, petrochemicals, oil etc.
*Heat exchangers
*Air conditoner
*Air condenser
* Boiler.....
High-efficiency fins for higher temperature applications giving complete and permanent atmospheric corrosion protection of the base tube.
Copper clad aluminium busbar is a new material used for substituting copper busbar. Owning to excellent electronic conductivity and tensile strength, this busbar generally reduce the conductor material cost. Adopts the most advanced continuous casting, continuous rolling which make the copper layer and aluminium layer combining each other firmly and permanently. It is widely used in the electrical equipments such as bus way, high-low switchgear cabinet, wind power conductive rail, converter, box-type substation, communication power supply cabinet and other relevant application field.
Copper clad aluminium busbar consists of a solid core of electrical grade aluminium with a pressure bonded outer layer of high conductivity copper. This compound has both advantages of better conductivity of copper and lower density of aluminium. It can reduce cost by up to 40% compared with a copper bar of equal dimensions. It offers economical solution and weight saving advantages over solid copper, while retaining the surface properties of a copper busbar. This yields the maximum cost saving.
Company production car radiator harmonica tube, aluminum tube and the water tank of high frequency welded pipe, all kinds of aluminum auto radiator radiator with aluminum plate, aluminum foil, aluminum belt (wall thickness range 0.06 0.5 mm), automotive radiator, water tank, cold, air conditioning, auto radiator tank tubing (oil cooler), auto radiator radiator water room, civilian industry building aluminum extrusions are based on raw materials, aluminum rods.
Our aluminum products include a series, three series, six series, seven series, etc. We can develop and design all kinds of aluminum products according to customer's requirements.
Aluminum alloy density is low, but the intensity is high, close to or more than high-quality steel, plastic, can be processed into various profiles, with excellent electrical conductivity, thermal conductivity and corrosion resistance, widely used on industry, usage is second only to the steel.
Aluminum alloy is divided into two categories: cast aluminum alloy, used in cast;The deformation aluminum alloy can withstand the pressure processing, the mechanical performance is higher than the casting state.Can be processed into various forms, specifications of aluminum alloy.Mainly used for making aviation equipment, daily necessities, building doors and Windows, etc.
The company mainly produces car radiator harmonica tube, aluminum tube and the water tank high frequency welded pipe, all kinds of aluminum auto radiator radiator with aluminum plate, aluminum foil, aluminum belt (wall thickness range 0.06 0.5 mm), automotive radiator, water tank, cold, air conditioning, auto radiator tank tubing (oil cooler), auto radiator radiator water room, civilian industry architectural aluminum, etc.
The aluminum products of the company include a series, three series, six series, seven series, etc., and can develop and design various kinds of aluminum products according to the customer's requirements.
Aluminum alloy density is low, but the intensity is high, close to or more than high-quality steel, plastic, can be processed into various profiles, with excellent electrical conductivity, thermal conductivity and corrosion resistance, widely used on industry, usage is second only to the steel.Aluminum alloy is divided into two categories: cast aluminum alloy, used in cast;The deformation aluminum alloy can withstand the pressure processing, the mechanical performance is higher than the casting state.Can be processed into various forms, specifications of aluminum alloy.The aluminum products of our company include a series, three series, six series, seven series, etc., and can develop and design various kinds of aluminum products according to the customer's requirements.
