Grade P1020, A7, A8, A85, ADC12
Origin Malaysia, Australia, South Africa, India, Russia, Middle East
Brand Press Metal/Tomago/Portland/Boyne/Hindalco/Vedanta/Rusal/Alba/Maaden/Sohar/Hillside
Grade: AL99.90, AL99.85, AL99.70(Standard aluminum), Or as per customer requirements.
Size: Can be customized according to customer needs.
Purity: Reference standard
Shape: Bar ingot, round ingot, plate ingot, T-shaped ingot and so on.
Application:
Widely used in construction, electricity, packaging, transportation and consumer goods and other occupations. Can be used for the
production of aluminum foil, aluminum alloy, corrosion prevention packaging materials, also can be used for chemical industry
aluminum alloy, utensils, cables, conductive body, center alloy, decoration materials, daily necessities, etc.
Package:
Standard airworthy export packaging: wooden pallets with plastic protection or according to customer requirements
Delivery time: Depends on the required quantity.
Price term: EXW, FOB, CIF, etc.
Payment Terms: D/T, L/C.
We're always ready to serve you, and closer than you think..
As you can reach us through:
Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of ingot is clean and smooth.
Introduction
Aluminum is a silver-white metal that ranks third in the earth's crust after oxygen and silicon.Aluminum is less dense, only 34.61% of iron and 30.33% of copper, so it is also called light metal.Aluminum is the world's output and usage are second only to steel non-ferrous metals.The density of aluminium is only 2.7103g/cm3, about a third of that of steel, copper or brass.Because of its light weight, aluminum is often used in the manufacture of vehicles, trains, subways, ships, airplanes, rockets, airships and other land, sea and air vehicles to reduce the dead weight and increase the loading capacity.
In our daily industrial raw materials called aluminum ingots, according to the national standard (GB/T 1196-2008) should be called "remelting with aluminum ingots", but we are used to "aluminum ingots".It is produced by electrolysis with alumina - cryolite.There are two kinds of aluminum ingots after they enter into industrial application: cast aluminum alloy and deformed aluminum alloy.Casting aluminum and aluminum alloys are castings of aluminum produced by casting method;Deformable aluminium and aluminium alloys are manufactured by means of pressure processing: plates, belts, foils, tubes, rods, moulds, wires and forgings.According to the national standard, "aluminum ingots for remelting are divided into 8 grades according to chemical composition, namely Al99.90, Al99.85, Al99.70, Al99.60, Al99.50, Al99.00, al99.7e, al99.6e" (note: the number after Al is the aluminum content).
Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of ingot is clean and smooth.
Introduction
Aluminum is a silver-white metal that ranks third in the earth's crust after oxygen and silicon.Aluminum is less dense, only 34.61% of iron and 30.33% of copper, so it is also called light metal.Aluminum is the world's output and usage are second only to steel non-ferrous metals.The density of aluminium is only 2.7103g/cm3, about a third of that of steel, copper or brass.Because of its light weight, aluminum is often used in the manufacture of vehicles, trains, subways, ships, airplanes, rockets, airships and other land, sea and air vehicles to reduce the dead weight and increase the loading capacity.
In our daily industrial raw materials called aluminum ingots, according to the national standard (GB/T 1196-2008) should be called "remelting with aluminum ingots", but we are used to "aluminum ingots".It is produced by electrolysis with alumina - cryolite.There are two kinds of aluminum ingots after they enter into industrial application: cast aluminum alloy and deformed aluminum alloy.Casting aluminum and aluminum alloys are castings of aluminum produced by casting method;Deformable aluminium and aluminium alloys are manufactured by means of pressure processing: plates, belts, foils, tubes, rods, moulds, wires and forgings.According to the national standard, "aluminum ingots for remelting are divided into 8 grades according to chemical composition, namely Al99.90, Al99.85, Al99.70, Al99.60, Al99.50, Al99.00, al99.7e, al99.6e" (note: the number after Al is the aluminum content).
321 Aluminum Ingots Suppliers
Short on time? Let Aluminum Ingots sellers contact you.
Product Details
Chemical Composition: Al
Weight: 20/25kg
Al (Min): 99.7%-99.9%
Place of Origin: China
Appearance: silvery white
Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of ingot is clean and smooth.
1. mainly used for melting ingot
2. discontinuous melting with scrap
3. easy control and operation
4. fast melting
5. Used for industry such as automobile,pinning and weaving,electron broadly and so on
The main models are as follows: AL99.90, AL99.85, AL99.70A, AL99.70, AL99.60, AL99.50, AL99.00.
Free samples below 1 kg are provided. For specific operation, please contact us
1.)Alloy:1070
 2 Temper: HO
3. Thickness: 2mm-40mm
4. Diameters:6mm-500mm
5. Package: Nylon bags or Cartons
The slugs are widely used for the manufacturing of electrolytic capacitors, aluminum containers or Collapsible Aluminium tubes for cosmetics, pharmaceutical, beverage containers, and many other packaging solutions.
CHONGQING EXCEED METAL CO.,LTD supplies aluminium discs in a wide variety of sizes and alloys. Two state-of-the-art disc blanking presses combined with open throat shear processing enable our facilities to supply a diverse range of markets.
1.)Alloy: 1100,1050,1060, 1070, 1200, 3003, 3004, 3105, 5052, 6061, 8011
2.) Temper:Â HO H12 H14 H16 H18 H22 H24 H26 H32 T6
3.)� Thickness: 0.3mm  6.0mm
4. Diameters : 80mm - 1100mm
5.) Package:Â wooden pallet, wooden case
Aluminium discs are specialized products that are mostly used in the production of cookwares, utensils, traffic signals, lighting lampshade, stock pots, kettles etc. Our metallurgical processes ensure availability of deep drawing and spinning quality specifications that match these demanding applications.
Antimony ingot, commonly known as refined antimony.
Use
ANTIMONY INGOT supplier is mainly used as the hardener of alloy for metallurgy, storage battery and military industry, as well as the raw material for producing antimony oxide. Antimony ingot is also used in movable type printing industry, lead material, cable sheath, solder and sliding bearing.
Antimony products are primarily refined antimony and antimony compounds, namely antimony trioxide, etc.The primary role of antimony in alloys is to add hardness, often referred to as metal or alloy hardener.Antimony and antimony compounds are used in wear - resistant alloys, printing type alloys and ordnance industries.With the development of science and technology, antimony is now widely used in the production of a variety of flame retardants, enamel, glass, rubber, paint, pigment, ceramics, plastics, semiconductor components, fireworks, medicine and chemical industry and other occupations.Ã?Â
Reserves and distribution
Refined Antimony content in the earth's crust is 0.0001%, and according to 2014 data from the U.S. geological survey, global antimony reserves are about 1.8 million tons.There are as many as 120 antimony minerals known, but only 10 antimony minerals with industrial value and containing more than 20% antimony are known.
Use of ALUMINUM ALLOY INGOT
All kinds of aircraft use aluminum alloy as the main structural material.The skins, beams, ribs, trusses, compartments and landing gear of aircraft can all be made of aluminum.The amount of aluminum used in an aircraft varies, depending on its purpose.The aluminum alloy used in Boeing 767 passenger plane accounts for about 81% of the body structure weight.For example, the f-15 high performance fighter with a maximum flight speed of Mach 2.5 only USES 35.5% aluminum alloy.Some aluminum alloys have good low temperature performance, at -183 ~ -253[2oc] is not cold and brittle, can work in liquid hydrogen and liquid oxygen environment, it does not react with concentrated nitric acid and partial dimethylhydrazine, has good welding performance, therefore it is a good material for making liquid rockets.The fuel tanks, oxidizer tanks, intertank, interstage, tail and instrument compartments of the Saturn 5 launch vehicle that launched the Apollo spacecraft were all made of ALUMINUM ALLOY INGOT.
The crew compartment, forward fuselage, middle fuselage, aft fuselage, vertical tail, flaps, elevons, and horizontal tail are all made of aluminum.The main structural material of various man-made earth satellites and space probes is also aluminum.
Use of ALUMINUM ALLOY INGOT
All kinds of aircraft use aluminum alloy as the main structural material.The skins, beams, ribs, trusses, compartments and landing gear of aircraft can all be made of aluminum.The amount of aluminum used in an aircraft varies, depending on its purpose.The aluminum alloy used in Boeing 767 passenger plane accounts for about 81% of the body structure weight.For example, the f-15 high performance fighter with a maximum flight speed of Mach 2.5 only USES 35.5% aluminum alloy.Some aluminum alloys have good low temperature performance, at -183 ~ -253[2oc] is not cold and brittle, can work in liquid hydrogen and liquid oxygen environment, it does not react with concentrated nitric acid and partial dimethylhydrazine, has good welding performance, therefore it is a good material for making liquid rockets.The fuel tanks, oxidizer tanks, intertank, interstage, tail and instrument compartments of the Saturn 5 launch vehicle that launched the Apollo spacecraft were all made of ALUMINUM ALLOY INGOT.
The crew compartment, forward fuselage, middle fuselage, aft fuselage, vertical tail, flaps, elevons, and horizontal tail are all made of aluminum.The main structural material of various man-made earth satellites and space probes is also aluminum.
Product name: aluminum silicon alloy ingot
Place of origin: China
Application: refine grain
Shape: ingot
Chemical Composition:AlSi20 AlSi30 AlSi35 AlSi50 AlSi30A AlSi35A
Color: Grey/Sliver
Packing:standard export packing
Purity: high purity
Supply Ability: 100 Ton/Tons per Month
Port of shipment:Xiamen.China
Lead Time :20days
Key Specifications/Special Features:
Chemical composition: Al
Al (Min): 99.7%-99.9%
Place of origin: China
Appearance: silvery white
Aluminum ingot for re-melting is produced by molten salt electrolysis method using alumina and cryolite. The surface of ingot is clean and smooth.
Key Specifications/Special Features:
Chemical composition: Al
Al (Min): 99.7%-99.9%
Place of origin: China
Appearance: silvery white
Aluminum ingot for re-melting is produced by molten salt electrolysis method using alumina and cryolite. The surface of ingot is clean and smooth.
Magnesium ingot: is it a new light corrosion of metal material, with a low specific gravity and large intensity of unit weight, high chemical stability of superior function, is widely used in automobile manufacturing, light industry, metallurgy industry, chemical industry, electronic industry and meter manufacturing, etc.
Magnesium ingot
Executive standard:GB/T 3499-2003
Product Specifications:7.5 ± 0.5kg, can according to the customer request specification production products
product use: Mainly in the aluminum alloy production, die-casting production, steelmaking desulfurization three areas, and rare earth alloys, metal reduction and other domains.
Magnesium ingot chemical composition
We are Specia Metal is specializing in producing Ladle , mould and ingots with steel material, we have enclosed our product catalogue, which introduces our company in detail and covers the main products we supply at present, or you may visit our website on line.
should any buyer interests our , please contact us, we look forward to receiving your enquiries anytime.
Aluminum wafers are widely used in electronics, daily chemical, medicine, culture and education, and auto parts.Electrical appliances, insulation, machinery manufacturing, automotive, aerospace, military, mold, construction, printing and other industries.Such as kitchen supplies such as non-stick cooker, pressure cooker and hardware supplies such as lampshade, water heater shell, stretch tank, etc., is the largest amount of aluminum alloy plate and strip deep processing products.
Weight: 20/25kg
Al (Min): 99.7%-99.9%
Place of Origin: China
Appearance: silvery white
Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of ingot is clean and smooth.
Applications:
1. mainly used for melting ingot
2. discontinuous melting with scrap
3. easy control and operation
4. fast melting
5. Used for industry such as automobile,pinning and weaving,electron broadly and so on
The main models are as follows: AL99.90, AL99.85, AL99.70A, AL99.70, AL99.60, AL99.50, AL99.00
Special Features:
1.Al (Min): 99%-99.9%
2.Place of Origin: China (Mainland)
3.Appearance: silvery white
4. Aluminum ingot for re-melting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2017. The surface of ingot is clean and smooth.
Classification
1. Aluminum ingots are classified according to their composition: aluminium ingots for remelting, high purity aluminium ingots and aluminium alloy ingots.
2.After aluminium ingot is used in industry, there are two kinds: cast aluminium alloy and deformed aluminium alloy.
3.Aluminum ingots for remelting are classified according to chemical
Packaging:
About 25Kg /Ingot, Packed in wooden case, Net weight 1000Kg/ Case,or as customer's requirements.
Applications:
1. mainly used for melting ingot
2. discontinuous melting with scrap
3. easy control and operation
4. fast melting
5. Used for industry such as automobile,pinning and weaving,electron broadly and so on
Grade Chemical Composition %
Alâ?¥ impurities â?¤
Si Fe Cu Ga Mg Zn Mn others Sum
Al99.9 99.90 0.50 0.07 0.005 0.02 0.01 0.025 - 0.010 0.10
Al99.85 99.85 0.80 0.12 0.005 0.03 0.02 0.030 - 0.015 0.15
Al99.7 99.70 0.10 0.20 0.010 0.03 0.02 0.030 - 0.030 0.30
Al99.6 99.60 0.16 0.25 0.010 0.03 0.03 0.030 - 0.030 0.40
Al99.5 99.50 0.22 0.30 0.020 0.03 0.05 0.050 - 0.030 0.50
Al99.00 99.00 0.42 0.50 0.020 0.03 0.05 0.050 - 0.050 1.00
The main models are as follows: AL99.90, AL99.85, AL99.70A, AL99.70, AL99.60, AL99.50, AL99.00
Key specifications/special features:
1.Product name: metallic magnesium alloy ingot
2.Appearance: bright silver metallic surface or as per buyer request
3.Specifications: 5kg, 6kg, 8kg, 12kg, 17.5kg
*Danger Symbolï¼?
When a certain concentration is reached, an explosion will occur on Mars
Applications
1.Magnesium is the third-most-commonly-used structural metal, following iron and aluminium.
2.magnesium is widely used for manufacturing of mobile phones, laptop and tablet computers, cameras, and other electronic components.
3.Magnesium is used in super-strong, lightweight materials and alloys. For example, when infused with silicon carbide nanoparticles, it has extremely high specific strength.
Packing:
About 1000Kgs/Mg pallet covering with plastic bag, or according to customers requirement.
Ingot weight :
15Kg+/- 0.5kg; 7.5+/-0.5Kg ; 300g+/-50g
