Canadian Petroleum Oil Related Products Suppliers and Manufacturers

Sales Specifications Appearance: Black Powder/Granules pH: 5.15 -5.63 Moisture as Packed: 3.2- 4.6 Iodine Number (mg/g): 1110.05 - 1120.79 -40 Mesh: 0.5 -1.55% Hardness Number: 98 Total Ash Content: 3.5 -3.7% Packing 55.12 LB Bag, 40 bags per pallet

Jet A1 is a kerosene-type fuel. Jet fuel or aviation turbine fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colorless to straw-colored in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A-1, which are produced to a standardized international specification. During the refining process only 8% of the crude oil is made up of Jet fuel.

Mazut a heavy low-quality fuel used in power generating plants and similar applications. In the U.S. and Western Europe, mazut is blended or broken down, with the final product that is diesel. The Mazut-100 is a fuel that is produced under the GOST specifications, for example GOST 10585-99. Mazut is almost exclusively manufactured in the Russian Federation, Kazakhstan, Azerbaijan and Turkmenistan. The most important thing is to qualify the fuel sulfur content. The VLS Mazut 100-75 and 100-99 Mazut Grade I are actually the same thing. GOST merged the old classifications of 75 and 99 in a new classification of seven degrees, all under 100-99. For some reason, many people still use the old adjective 75, particularly the Chinese.

Fuel Oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking, oil is any liquid petroleum product, which is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 40 C (104 F). Oil is made of long hydrocarbon chains, particularly alkanes, cycloalkanes and aromatics. The term Fuel Oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil, heavier than gasoline and naphtha. Fuel oils are used as fuel for power generation, marine bunkers and large industrial heating plants. Fuel oil 180 CST, also known as Bunker Fuel or Residual Fuel Oil, is characterized by its viscosity, which is measured in centistokes (CST).� The number 180 indicates the maximum viscosity of the oil at 50 degrees Celsius. This specification makes it a relatively thick and viscous fuel, compared to lighter fuel oils. Both CST 180 and CST 380 fuel oils are considered heavy fuel oils and are commonly used in the shipping industry. They are often referred to as bunker fuels and are used in vessels like cargo ships, container ships, and oil tankers.

The full name of Jet Fuel A1 is the aviation Kerosene Colonial Grade 54 Jet Fuel JP 54 Jet fuel designed for use in aircraft powered by gasturbine engines It is clear to strawcolored in appearance The most commonly used fuels for commercial aviation are Jet A and Jet A1 which are produced to a standardized international specification Jet fuel is a mixture of a large number of different hydrocarbons The range of their sizes is restricted by the requirements for the product for example the freezing point or smoke point Kerosenetype jet fuel has a carbon number distribution between about 8 and 16 carbon numbers carbon atoms per molecule wide cut or naphthatype jet fuel including Jet B between about 5 and 15 carbon number Jet A1 is the standard specification fuel used in the rest of the world Jet A1 has a flash point higher than 38C 100 F with an autoignition temperature of 210 C 410 F

Automotive Gas Oil (AGO) is also known as diesel because it is� a by-product of crude oil. It is gotten in the mid-boiling range of the crude oil refining process. AGO is a less flammable fuel compared to other petroleum products such as premium motor spirit. AGO is used in two main types of vehicles namely heavy-duty vehicles, such as trucks and buses and light-duty vehicles, such as vans and passenger cars. Both oil and natural gas are made up primarily of hydrocarbon (H), which is a chemical compound consisting entirely of carbon (C) and hydrogen (H). They can be classified further into a variety of types depending on the structure of molecules and how they are bound.

Dear buyer! We can provide services for the purchase of Aviation Turbine Fuel (Jet A1, JA1, JP A1) for export. Origin: Kazakhstan/ Russia, MOQ:500.000BBLS, FOB price: $73/$69, CIF price: $69/$65 (Gross and Net respectively). contact us for the procedure. Note: Seller do not work according to someone else's procedures. The seller will deliver on the terms: CIF / FOB ports ROTTERDAM, SHARJAH UAE/MERSIN TURKEY, UST-LUGA.

Paraffin are products produced in oil refineries, from the deparaffination of mineral oils. Paraffins have many applications and are available in different formats: solid paraffin (slabs, pellets, powder) and liquid paraffin. Paraffin wax is a highly popular, clean burning wax which has a brilliant scent throw when compared to naturally sourced waxes.Often pure white and made from petroleum, paraffin wax is easy to work with, stable when shaped and odourless when burnt. The wax mixes well with all dyes and scents we provide with no adverse effects making it the ideal wax for candle making beginners and adepts alike. Paraffin wax is used for many products, including candles, paper coating and other industrial uses. It is white and comes in a variety of melt points. It can be used alone or as an additive to provide specific properties to a product. Blended Waxes has a variety of domestically sourced paraffin wax products available. If you are looking for a paraffin wax with a custom melt pointï¼?Junda is your excellent choice !

Fushun 0.5%oil content refined solid paraffin wax, kunlun brand. Paraffin Wax 1.100% Pure Paraffin Wax 2.ISO 9001 proved 3. Transparent and White 4.Low Oil Content 5. SGS 6. REACH Fully refined and semi refined paraffin wax is used widely, mainly used as candles,board,plastics,rubber and other commodity(like waxed paper ,crayons,candles,carbon paper) of the component and packing materials, baking container with dressing, used for electrical components, insulation rubber aging resistance and increased flexibility, etc.

Origin: Kazakhstan ALL OCTANES AVAILABLE (Note that image is not mine it's simply used for marketing purposes) Gasoline is a petroleum-based fuel commonly used in internal combustion engines. It is primarily used as a fuel for automobiles, motorcycles, and small engines. Gasoline comes in various octane ratings, which represent the fuel's resistance to knocking or engine detonation.

Jet Fuel A1 and Jet Fuel A FOB Basis for Rotterdam and Houston but mostly Rotterdam. Requirements from buyer - ICPO - Company Profile - Verfiable TSA

Mineral oil, also known as liquid paraffin, is a naturally-derived odorless, colorless oily liquid. This variety of Mineral Oil 70 USP represents the most refined, purest grade with a low viscosity. Mineral oil in cosmetics may help prevent moisture loss and rejuvenate oneâ??s skin due to its natural emollient properties, making this a very common ingredient in topical personal-care products such as ointments, creams, sunscreen and lip care. In additional to personal-care formulations, bulk mineral oil 70 is often used in a wide-range of industrial applications as a lubricant or release agent. Itâ??s used in the rubber, machinery, light textile, petrochemical and pharmaceutical industries. This product has been tested and meets the standards set by the United States Pharmacopeia (USP) for purity and quality. Specifications Description Colorless, transparent, oily liquid, free or practically free from fluorescence. It is odorless and tasteless when cold and develops not more than a faint odor of petroleum when heated. Solubility Insoluble in water and in alcohol, soluble in volatile oils. Miscible with most fixed oils but not with castor oil. Specific Gravity Between 0.818 and 0.880 0.8255 Acidity/Alkalinity Not more than 0.1 ml of 0.1 M sodium hydroxide is required. Viscosity Not more than 33.5 centistokes (between 11.0 â?? 14.0 cSt). Neutrality The alcohol remains neutral to litmus. Readily carbonisable substance The oil may turn hazy but should remain colorless, or shows a slight pink or yellow color and the acid should not become darker than the standard solution. Limit of polynuclear compounds The absorbance of sample solution at any wavelength in the range 260 to 350 nm should not be more than one third of the absorbance of standard solution at 275 nm. Solid Paraffin Conforms Sulphur Compounds The mixture remains colorless. Packing 1829.818 LB per Tote 441 LB Drum, 4 drums per pallet

Paraffin wax is a white or colorless soft solid derivable from petroleum, coal or oil shale, that consists of a mixture of hydrocarbon molecules containing between twenty and forty carbon atoms. It is solid at room temperature and begins to melt above approximately 37 C (99 F). Common applications for paraffin wax include lubrication, electrical insulation, and candles, wax paper, polishes, cosmetics, and electrical insulators. It assists in extracting perfumes from flowers, forms a base for medical ointments, and supplies a waterproof coating for wood. In wood and paper matches, it helps to ignite the matchstick by supplying an easily vaporized hydrocarbon fuel. Fully refined paraffin wax of which oil content is maximum 0.5% and melting point 60/62 C . semi refined paraffin wax of which oil content is from 1% to 10% and melting point 58/60 , 60/62 or 62/64 C , our paraffin wax colors differ from snow white transparent to cream depending its oil content and being heavy or light grade which is related to the melting point of the raw material used . fully refined paraffin wax is used for cosmetic and food products and semi refined paraffin wax usages is candle making, painting, floor covering.

CAS : 111-65-9 HS Code : 2901100000 140kgs*80drums/20"GP, 140kgs*160drums/40GP 2. ISO TANK, 15tons Mainly used as solvent ga-soline, industrial ga-soline components. Other solvents used as solvent for printing ink, diluent for coating solvent, solvent for butyl rubber and olefin polymerization and other organic reactions, used as solvent and chromatographic analysis standard material, also used in organic synthesis.

AVIATION FUEL JET A1 LIFT ABLE QUANTITY FOB Minimum Quantity 500,000 Barrels per Month Maximum Quantity 10,000,000 Barrels Lift able FOB Price Gross USD 72 Net USD 68 Per Barrels FOB Rotterdam, Houston, Jurong, Fujairah Ports Commissions USD 4; USD 2 Seller side per Barrel USD 2 Buyer side per Barrel Payable by Seller A TTT/TTV Vopak and other Tier 1 Storage 1 Buyer issues ICPO incorporated with Sellers working procedures Buyers banking details company registration certificate Buyers Passport alongside CPA/TSA 2 Seller issues Commercial Invoice Buyer Buyer signs and return Commercial Invoice alongside the NCNDA/IMFPA endorsed by intermediaries within 48 hours 3 Seller issues a copy of ATV from world renowned tank storage companies VTTI VOPAK KOOLE SVNT etc for Buyer to contact and obtain visit approval for physical inspection of product and dip test at Buyers expense 4 Upon successful verification of product in Sellers tank there will be a schedule for injection programming of fuel into Buyers nominated vessel/tank 5 Upon successful completion of injection Buyer makes payment for the total value of product injected via TT wire MT103 6 Seller confirms payment and transfers Product Title alongside full POP documents to Buyer and pays commission to intermediaries as per NCNDAIMFPA 7 With 5 banking days Seller and Buyer companies negotiates for subsequent monthly shipments continue as per terms and conditions of contract between companies B TTO Vopak and other Tier 1 Storage 1 Buyer issues ICPO incorporated with Sellers working procedures Buyers banking details company registration certificate and Buyers Passport 2 Seller issues Commercial Invoice to Buyer, Buyer signs and return Commercial Invoice alongside the NCNDAIMFPA endorsed by intermediaries within 48 hours 3 Seller issues a copy of ATV from a world-renowned tank storage companies VTTI VOPAK KOOLE SVNT etc for Buyer to contact and obtain visit approval for physical inspection of product and DIP TEST at Buyers expense 4 Buyer receives official scheduled invitation date and appointment time from Sellers tank to carry out physical verification of product 5 Upon completion of successful the physical verification process Buyer takes over Sellers tank by making payment for the total value of product injected via TT wire MT103 6 Seller confirms payment and transfers Product Title alongside full POP documents to Buyer and pays commission to intermediaries as per NCNDAIMFPA 7 With 5 banking days Seller and Buyer companies negotiates for subsequent monthly shipments continue as per terms and conditions of contract between companies Please lock these deals down today

PRODUCTS PRICES AND LIFT ABLE QUANTITIES (FOB) - VOPAK TERMINALS. DIESEL OIL EN590 -10PPM LIFT ABLE QUANTITY FOB: Minimum Quantity: 40,000 Metric Tons per Month, Maximum Quantity: 300,000 Metric Tons Lift able. FOB Price: Gross USD $430.00MT / Net USD $420.00MT, FOB Rotterdam |Jurong & Fujairah Ports Commissions: $10, Seller side - $ 5.00 per Metric Tons / Buyer side - $ 5.00 per Metric Tons, Payable by Seller FOB TRANSACTION PROCEDURE FOB VOPAK TERMINALS DIP & PAY A. TTT/TTV (Vopak and other Tier 1 Storage) 1. Buyer issues ICPO incorporated with Seller's working procedures, Buyer's banking details, company registration certificate, Buyer�??s Passport alongside CPA/TSA. 2. Seller issues Commercial Invoice Buyer, Buyer signs and return Commercial Invoice alongside the NCNDA/IMFPA endorsed by intermediaries within 48 hours. 3. Seller issues a copy of ATV from world renowned tank storage companies (VTTI, VOPAK, KOOLE, SVNT etc) for Buyer to contact and obtain visit approval for physical inspection of product and dip test at Buyer�??s expense. 4. Upon successful verification of product in Seller�??s tank, there will be a schedule for injection programming of fuel into Buyer�??s nominated vessel/tank. 5. Upon successful completion of injection, Buyer makes payment for the total value of product injected via TT wire MT103. 6. Seller confirms payment and transfers Product Title alongside full POP documents to Buyer and pays commission to intermediaries as per NCNDA/IMFPA. 7. With 5 banking days, Seller and Buyer companies negotiates for subsequent monthly shipments continue as per terms and conditions of contract between companies. B. TTO (Vopak and other Tier 1 Storage) 1. Buyer issues ICPO incorporated with Seller's working procedures, Buyer's banking details, company registration certificate and Buyer�??s Passport 2. Seller issues Commercial Invoice to Buyer, Buyer signs and return Commercial Invoice alongside the NCNDA/IMFPA endorsed by intermediaries within 48 hours. 3. Seller issues a copy of ATV from a world-renowned tank storage companies (VTTI, VOPAK, KOOLE, SVNT etc.) for Buyer to contact and obtain visit approval for physical inspection of product and DIP TEST at Buyer�??s expense. 4. Buyer receives official scheduled invitation date and appointment time from Seller�??s tank to carry out physical verification of product. 5. Upon completion of successful the physical verification process, Buyer takes over Seller�??s tank by making payment for the total value of product injected via TT wire MT103. 6. Seller confirms payment and transfers Product Title alongside full POP documents to Buyer and pays commission to intermediaries as per NCNDA/IMFPA. 7. With 5 banking days, Seller and Buyer companies negotiates for subsequent monthly shipments continue as per terms and conditions of contract between companies.

PRODUCTS PRICES AND LIFT ABLE QUANTITIES (FOB) - VOPAK TERMINALS. AVIATION FUEL: JET -A1 LIFT ABLE QUANTITY FOB: Minimum Quantity: 500,000 Barrels per Month, Maximum Quantity: 2,000,000 Barrels Lift able. FOB Price: Gross USD $76.00 / Net USD $74.00, Per Barrels, FOB Rotterdam | Houston / Jurong & Fujairah Ports Commissions: $2, Seller side - $ 1.00 per Barrel / Buyer side - $ 1.00 per Barrel, Payable by Seller. FOB TRANSACTION PROCEDURE FOB VOPAK TERMINALS DIP & PAY 1. Buyer Sends CIS and ICPO of their purchasing product to Seller for verification and processing: 2. Seller submit buyer files to Vopak Terminal Manager. 3. Vopak Terminal Manager send Vopak Agreement to buyer through Seller. Buyer within 48 hours sign and return the Vopak Agreement through Seller. 4. Buyer finalizes the Vopak Terminal Protocols cost through the supplier with the Vopak Terminal Manager, and obtain the following and submit the same to Seller as listed below. o VopakBarcode o VopakRegistrationinformation. o VopakReferenceCode. 4b. Format of Authorization Form to accompany the information LETTER OF AUTHORIZATION: We, (Buyer Name), with registered Office, at (Address). represented by Mr. ________________, with Passport number ________________. Owner of Barcode code at Royal Vopak Rotterdam, with contract reference number: _____________. NB: Immediately buyer complete the above process and receive Vopak Reference through Vopak Terminal Manager, buyer will have access to communicate directly to Vopak Management with the help of the Reference code assigned to the buyer. 5. Seller, sends Cl for Buyer's endorsement. Buyer signs the CI and retune back within 24 hours of receiving alongside side with Sign Letter of Authorization. 6. Seller issue Buyer Full POP documents along with fresh SGS (Not less than 48 hours, one-time official confirmation mail from SGS official). Fresh SGS Report or Saybolt (Not later than 24 72 hours) Tank Storage Receipt (TSR) with GPS Coordinates of where the Tanks/Vessel are located. Injection Report Agreement Authorization to Sell Authorization to verify the product in the tank (ATV) Country Certificate of Origin Approved Dip Test Authorization (DTA Availability of Product, Commitment to Supply, 7. After verification of full POP by buyer, injection begins. 8. Upon completing the Injection, seller transfers title to buyer. 9. Buyer makes full payment after via MT103.

KAZAKHSTAN AVIATION TURBINE FUEL JET A1/TS-1 KEROSENE Quantity: 1,000,000-5,000,000 Barrels CIF Price: Gross $85USD per Barrels / Net $80USD per Barrels FOB Price: Gross $80USD per Barrels / Net $88 USD per Barrels TERMS & OPERATIONAL PROCEDURE: C.I.F 1. Buyer issues ICPO must be with buyer company letterhead and buyer banking information. 2. Seller issues Draft Contract (open for any amendments) to Buyer. Buyer signs, seals and returns the Draft Contract to Seller for final endorsement with letter of acceptance. Seller gives Partial proof of products. (A) Certificate of Origin (B) Product quality passport (Analysis test Report) By KAZAKHSTAN standard gost R (C) Commercial Invoice (D) Statement of availability of product 3. Within 7 banking days, Buyers bank sends Transferable SBLC, DLC, BG via MT760/MT700 Letter Credit according to sellers fiduciary bank verbiage to seller nominated fiduciary offshore bank account for first month shipment, should buyer fail to issue payment instrument within 7 banking days, buyer will make cash deposit of $ 400,000 by TT wire transfer for security guarantee to enable seller charter vessel and commence shipment, and this payment will be deducted from the total cost of product after inspection at discharge port, Sellers Bank issues Full POP Documents to the Buyers Bank alongside with the 2% Performance Bond (PB) a) Copy of license to export, issued by the department of the Ministry of Energy, KAZAKHSTAN Federation. b) Copy of Approval to Export, issued by the Ministry of Justice, KAZAKHSTAN Federation. c) Copy of statement of availability of the product. d) Copy of the refinery commitment to produce the product. e) Copy of Transnet contract to transport the product to the loading port. f) Copy of the port storage agreement. g) Copy of the charter party agreement to transport the product to discharge port h) Copy of Vessel Questionnaire 88. i) Copy of Bill of Lading. j) SGS Report at loading port. k) Dip test Authorization (DTA) & ATB l) NOR /ETA m) Certificate of Ownership Transfer n) Allocation Transaction Passport Code Certificate (ATPCC) by Ministry of Energy Shipment commences as per signed contract delivery schedule and the shipment should arrive at Buyers discharge port within 5- 25 days. The SGS inspection will be borne by the Seller at the loading seaport and Buyer at the unloading seaport. 4. Buyer releases payment to Seller by TT/MT103 upon receipt of the shipping documents and confirmation of the Q & Q by SGS/CIQ at destination port. 5. Seller pays commission within 48 hours by swift MT103 to all intermediaries as signed NCNDA/IMPFA.

PRODUCT ORIGIN: GEORGIA, KAZHAKSTAN UAE, EUROPE, SINGAPORE ETC (NON-SANCTIONED) Quantity: 700,000 Bbl - 2,000,000 Bbl Trial lift Quantity: 2,000,000 Bbl 5,000,000 Bbl per Month x 12 Months Price FOB: USD $63 Gross / USD 61 Net Per Barrel Price CIF: USD $83 Gross / USD $81 Net Per Barrel Loading port: Houston ,Rotterdam, Batumi, Poti , Akta, Kuryk UAE -SINGAPORE