Canadian Diesel Suppliers and Manufacturers

Diesel Gas Oil Ultra-Low Sulphur Diesel (ULSD) is a refined diesel fuel with significantly reduced sulfur content, meeting stringent environmental standards. It ensures cleaner emissions, improved engine performance, and fuel efficiency, making it ideal for modern diesel engines in transportation and industrial applications.

Diesel Gas D2 Oil 305-82 is a refined, high-performance diesel fuel used in industrial and commercial applications. Known for its reliability and efficiency, it is suitable for heavy machinery, transportation, and power generation, providing consistent performance and optimal combustion.

Diesel Oil EN590 ULSD PPM10 is a high-quality ultra-low sulfur diesel fuel with a sulfur content of 10 parts per million (PPM). It is designed for use in modern diesel engines, offering reduced emissions, improved engine efficiency, and compliance with stringent environmental standards.

Ultralow sulfur diesel ULSD is a cleanerburning diesel fuel that contains a maximum of 15 parts per million ppm of sulfur ULSD contains 97 less sulfur than lowsulfur diesel LSD which typically contains 500 ppm of sulfur The European Union began mandating the reduction of diesel sulfur content in 1993 and the United States started phasing in ULSD requirements for highway vehicles in 2006 It was developed to allow for the use of improved pollution control devices that reduce diesel emissions ULSD can significantly reduce emissions when used in combination with cleanerburning diesel engines and vehicles It may react with strong acids or strong oxidizing agents such as chlorates nitrates and peroxides You should avoid contact with heat sparks fire and oxidizing agents The appearance of ULSD should be clear and bright free from visible sediment and water

D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world, it has other names. Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2% water and one- half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400.

Gasoil or D2 is the second distillate obtained from crude oil There are varying contents of sulphur in Gasoil and D2 products that will affect when the fuel is best to use seasons and the cost thereof To ensure that clients are provided with suitable D2 products there are ISO industry standards that suppliers must adhere to Gasoil Gas oil forms part of a family of heavy oils It is created by means of a process of fractional distillation of petroleum It is used as a diesel fuel in heating and automotive applications Gas oil that is used to power offroad vehicles that are used in the industrial commercial and agricultural communities is often called red diesel Fuels and oils are taxed differently depending on their purpose gas oil used for tractors mowers and tippers are dyed red in order for inspectors to tell the difference Other gas oil is considered white diesel as it is not dyed D2 Gas Oil This is gas oil that is the second distillate and is obtained through the processing of crude oil Reformers and additives are not required to make use of this fuel The version of D2 that has lower sulphur content is called GOST 30582 It is presented to the market as a major reduction in pollution gas oil GOST 30582 GOST 30582 is D2 with lower sulphur content GOST is a variant of Gasoil and D2 that is in line with ISO industry standards with a sulphur content of 002 max This is known as Ultra Low Sulphur fuel Low sulphur fuel is that with 02 sulphur content

EN590 Diesel10PPM Ultra Low Sulfur Diesel ULSD is a premium diesel fuel EN 590 10 ppm is a type of diesel fuel with a sulfur content of 10 parts per million ppm Its a low emission diesel fuel thats ideal for power generators tower cranes construction trucks and excavators with diesel engines  It conforms the European standard EN590 with an ultralow sulfur content of only 10 parts per million PPM This type of diesel is known for its environmental benefits and is widely used in modern diesel engines

Greetings, we trust this message finds you well. We are reaching out to express our warmest regards and extend an invitation for potential collaboration. In order to better understand your requirements, we kindly request you to share the requested quantity for EN590 10PPM. This information will allow us to tailor our offer to meet your specific needs effectively. With authorized access to reputable refineries, we take pride in ensuring the delivery of high-quality products, providing exceptional service and buyer friendly procedures. Our commitment is to foster a mutually beneficial business relationship that goes beyond expectations. Looking forward to your prompt response and the opportunity to discuss further details. Origin : Kazakhstan / Russia

"Diesel D6 virgin oil" is not a standard term in the oil industry. However, based on common industry terminology and understanding, it seems you might be referring to a specific type of diesel fuel. Here's a general description that could apply: Diesel D6 is typically classified under the category of middle distillates, which are refined products derived from crude oil. It is a specific grade of diesel fuel used primarily for automotive engines and industrial applications. The term "virgin oil" is not commonly used in this context; instead, "virgin" could imply that the diesel fuel is of high quality and meets certain specifications without being mixed or blended with lower-grade fuels. Key characteristics of Diesel D6 may include: High Energy Density: Diesel D6 is known for its high energy content per volume, making it efficient for use in diesel engines which are common in transportation (e.g., trucks, buses, trains) and industrial machinery. Low Sulfur Content: Modern regulations often require diesel fuels like D6 to have low sulfur content to reduce emissions and comply with environmental standards. Suitable for Various Climates: It is formulated to perform well in a range of temperatures and conditions, ensuring reliable operation in both cold and warm climates. Industrial and Automotive Use: Besides transportation, Diesel D6 is used in various industrial applications where a reliable and efficient fuel source is needed. For oil exporters, Diesel D6 represents a valuable product that can be sold to domestic and international markets where there is demand for high-quality diesel fuel. Exporting Diesel D6 requires compliance with international standards and specifications to ensure it meets the requirements of customers and regulatory authorities in the receiving countries. Origin: Kazakhstan / Russia.

Cetane Number 51 min Density at 15�°C 820-845 Kinematic Viscosity 2.0-4.5 at 40 C Sulfur Content 10 max Distillation, 90% Recovered at �°C 370 max Total Contamination 24 max Copper Strip Corrosion, 3 hrs at 50�°C Class 1 max Water Content 200 max Sediment Content 0.05 max Cloud Point -5 max Pour Point -15 max Ash Content 0.01 max

World Simplest Procedure: No Upfront Payment, POF FOR POP DEAL PRICE: USD 560/MT Gross. VTT- FOB ASWP TRANSACTION PROCEDURES: 1. Buyer provides ICPO incorporating sellerâ??s procedures, Buyer RWA + ATV for seller to perform due diligence and verify POF with Buyer's Bank. 2. Seller sends signed Commercial Invoice (CI) to Buyer and Buyer countersigns and sends CI back to seller within 48 hours. NCNDA+IMFPA is completed and signed off by all parties. 3. Products will be loaded onto a vessel at the seller's loading port and fresh SGS will be completed and provided to the buyer. 4. Seller will provide buyer with a copy of the Charter Party Agreement; therefore, the buyer can view the vessel as it is moving to the destination port. 5. The buyer has choice to either have the product discharged in any of the ports specified above based on product. 6. Upon arrival of the vessel tanker at the final discharge port, the buyer shall show updated POF, conduct the SGS/CIQ Inspection (optional at buyer's expense) and make the payment for the full shipment via TT Wire or MT103 TT (Wire Transfer). Buyer has the choice of paying in full through TT Wire or MT103 upon first SGS at loading port, or when the product starts discharging into buyerâ??s tank or as soon as the discharge is completed into the buyerâ??s tank. 7. Seller transfers ownership of the product to the buyer as per the buyerâ??s instructions. 8. The seller pays all buyer and seller intermediaries the full commission amount as stated in the NCNDA/IMFPA agreement. Subsequently, monthly contract proceeds as outlined in the terms and conditions of the sales and purchase agreement between the buyer and the seller. VTO PROCEDURES- FOB ASWP PROCEDURES (VESSEL TAKE OVER): 1. Buyer provides ICPO incorporating sellerâ??s procedures, Buyer RWA + ATV for seller to perform due diligence and verify POF with Buyer's Bank. 2. Seller sends signed Commercial Invoice (CI) to Buyer and Buyer countersigns and sends CI back to seller within 48 hours. NCNDA+IMFPA is completed and signed off by all parties. 3. Products will be loaded onto a vessel at the seller's loading port and fresh SGS will be completed and provided to the buyer. 4. Seller will provide buyer with a copy of the Charter Party Agreement; therefore, the buyer can view the vessel as it is moving to the destination port. 5. Upon arrival of the vessel tanker at the final discharge port, the buyer shall show updated POF, conduct the SGS/CIQ Inspection (optional at buyer's expense) and make the payment for the full shipment via TT Wire or MT103 TT (Wire Transfer). 6. Seller transfers ownership of the product and buyer takes over the vessel. 7. The seller pays all buyer and seller intermediaries the full commission amount as stated in the NCNDA/IMFPA agreement. Subsequently, monthly contract proceeds as outlined in the terms and conditions of the sales and purchase agreement between the buyer and the seller.

PRODUCTS PRICES AND LIFT ABLE QUANTITIES (FOB) - VOPAK TERMINALS. DIESEL OIL EN590 -10PPM LIFT ABLE QUANTITY FOB: Minimum Quantity: 40,000 Metric Tons per Month, Maximum Quantity: 300,000 Metric Tons Lift able. FOB Price: Gross USD $560.00MT / Net USD $540.00MT, FOB Rotterdam |Jurong & Fujairah Ports Commissions: $20, Seller side - $ 10.00 per Metric Tons / Buyer side - $ 10.00 per Metric Tons, Payable by Seller FOB TRANSACTION PROCEDURE FOB VOPAK TERMINALS DIP & PAY 1. Buyer Sends CIS and ICPO of their purchasing product to Seller for verification and processing: 2. Seller submit buyer files to Vopak Terminal Manager. 3. Vopak Terminal Manager send Vopak Agreement to buyer through Seller. Buyer within 48 hours sign and return the Vopak Agreement through Seller. 4. Buyer finalizes the Vopak Terminal Protocols cost through the supplier with the Vopak Terminal Manager, and obtain the following and submit the same to Seller as listed below. o VopakBarcode o VopakRegistrationinformation. o VopakReferenceCode. 4b. Format of Authorization Form to accompany the information LETTER OF AUTHORIZATION: We, (Buyer Name), with registered Office, at (Address). represented by Mr. ________________, with Passport number ________________. Owner of Barcode code at Royal Vopak Rotterdam, with contract reference number: _____________. NB: Immediately buyer complete the above process and receive Vopak Reference through Vopak Terminal Manager, buyer will have access to communicate directly to Vopak Management with the help of the Reference code assigned to the buyer. 5. Seller, sends Cl for Buyer's endorsement. Buyer signs the CI and retune back within 24 hours of receiving alongside side with Sign Letter of Authorization. 6. Seller issue Buyer Full POP documents along with fresh SGS (Not less than 48 hours, one-time official confirmation mail from SGS official). Fresh SGS Report or Saybolt (Not later than 24 72 hours) Tank Storage Receipt (TSR) with GPS Coordinates of where the Tanks/Vessel are located. Injection Report Agreement Authorization to Sell Authorization to verify the product in the tank (ATV) Country Certificate of Origin Approved Dip Test Authorization (DTA Availability of Product, Commitment to Supply, 7. After verification of full POP by buyer, injection begins. 8. Upon completing the Injection, seller transfers title to buyer. 9. Buyer makes full payment after via MT103.