Ferrous Gluconate Dihydrate USP also know as Iron(II) Gluconate Hydrate is a compound that has acidic properties. It is produced by the dehydration of iron gluconate and is used in many different applications, such as photoelectron spectroscopy, magnetometry, and dispersive analysis. Ferrous Gluconate Dihydrate USP can also be used to produce coagulated blood samples, which are then analyzed using infrared spectrometry or microscopy. Ferrous Gluconate Dihydrate USP is also used as an iron supplement and food additive in the food and pharmaceutical industries. It is also used as a nutrient source for microorganisms in fermentation processes and as a laboratory chemical for research and development.
Specifications
Ferrous chloride, solution is the greenish-white crystalline solid dissolved in water. It is used in pharmaceutical preparations, for sewage treatment, and as a mordant (which fixes dyes so that they will not run) in textiles. It serves as a coagulation and flocculation agent in waste water treatment as well as odor control. It is also used as a precursor to make various grades of hematite that can be used in a variety of pigments. It is the precursor to hydrated iron (III) oxides that are magnetic pigments.
Sales Specification
Appearance: Green to Dark Color Liquid
Ferrous Chloride(FeCl2): 18% -32%
Fe(II): 8%-14%
Typical Analysis
Ferrous chloride as FeCI2: 28.0%-30.0%
Specific Gravity @ 68 F: 1.312 g/ml
Free Acid: 0.50%Max
Ferric Chloride as FeCI3: 3300 ppm Max
Packing
In 2995 LB Tote
DOT Transportation Information:
UN No.:UN1760
Proper Shipping Name: Ferrous Chloride, Solution
Hazard Class: 8
Packing Group: II
RQ
The Reportable Quantity (RQ) under CERCLA is 100 lbs
Ferrocene 98% is used as a fuel additive for petrol engines and catalyst in rocket fuel. It acts as a photosensitive catalyst and promotes the photochemical degradation of plastic films. It is also used as laboratory chemical.
Specifications
Appearance: Orange-yellow Powder
Purity (%): 98.5
Melting Point (oC): 172 ~ 174
Free Fe Content (PPm): 300
Insoluble Matter in benzene (%): 0.50
Packing
25 KG drum, 12 drums per pallet
DOT Transportation
Ferric Chloride 38-42% Solution is a light brown aqueous solution with a slight hydrochloric acid odor. It is highly corrosive to most metals and noncombustible. It is primarily used in water and waste water treatment as a flocculant, but it's also used as a chemical intermediate in metal treating, as an etching agent in printed circuit boards and electronics and odor control.
Functions
Flocculant
Etching Agent
Chemical Intermediate
Sales Specification
Appearance: Dark Brown Liquid
FeCl3: 38-42%
Fe(III): 13.1-14.5%
Fe(II): <0.25%
Free HCI: <0.75%
Packing
275 Gallon tote (In 3131 Lb Tote)
DOT Transportation
UN No.: 2582
Proper Shipping Name: Ferric Chloride, Solution
Hazard Class: 8
Packing Group: III
RQ
The Reportable Quantity (RQ) under CERCLA is 1,000 lbs
Ferric chloride hexahydrate is used in applications such as a flocculant in water and waste water treatment industry, as a chemical intermediate in metal surface treatment for the Metal Finishing and Painting Compounds Industry; it's also used as a component in soil remediation for the agricultural industry.
Functions
Flocculant
Chemical Intermediate
Agrochemical Component
Sales Specification
Appearance: Yellow Crystals
Assay: 99.0% Min
Lead (Pb) content: 2.5PPM Max
Insoluble in water: 0.1% Max
Free Acid (HCl): 0.1% Max
Sulfate (SO4): 0.01% Max
NO3: 0.01% Max
PO4: 0.01% Max
Mn: 0.02% Max
Ferrous: 0.002% Max
Cu (Copper): 0.005% Max
Zn (Zinc): 0.003% Max
As (Arsenic): 0.005% Max
(SO4 2-) Unprecipitate by NH3: 0.1% Max
Packing
25 KG drum, 27 drums per pallet
DOT Transportation
UN No.: 3260
Proper Shipping Name: Corrosive solid, acidic, inorganic, n.o.s. Ferric Chloride
Hazard Class: 8
Packing Group: III
5685 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
Ferric Ammonium Oxolate is used in the preparation of Langmuir-Blodgett magnetic thin films. It is also involved in the production of blueprint paper. Its also used As a precipitant of calcium and magnesium. Ferric Ammonium Oxalate is used in the electroplating industry for the chemical absorption on anodized aluminum, producing a range of gold colors from light champagne hues to dark gold finishes.
Specifications
The major use of ethylene glycol is as an antifreeze agent in the coolant in for example, automobiles and air-conditioning systems that either place the chiller or air handlers outside or must cool below the freezing temperature of water. In the plastic industry, ethylene glycol is an important precursor to polyester fibers and resins. Ethylene glycol is used in the natural gas industry to remove water vapor from natural gas before further processing. Minor uses of ethylene glycol include the manufacture of capacitors, as a chemical intermediate in the manufacture of 1,4-dioxane, as an additive to prevent corrosion in liquid cooling systems for personal computers, and inside the lens devices of cathode-ray tube type of rear projection televisions.
Sales Specs
Appearance: Colourless Liquid
Purity: 99.1% Min
Diethylene Glycol: 0.6% Max
Acidity: 20 PPM Max
Water: 0.3% Max
Color (Pt-Co): 10 Max
Iron: 1 PPM Max
Packing
507.80 LB drum, 4 drums per pallet
2204.60 LB tote
Ethylenediaminetetraacetic Acid (EDTA) is mainly used as a chelating agent and in the paper industry, home industrial and institutional care industry and agriculture industry .
Specifications
Appearance: White Crystalline Powder
Assay (as C10H16N2O8) %: 99.00
Chlorides %: 0.05
Sulfate (as SO4 2-) %: 0.02
Heavy Metal(as Pb) ppm: 10
Ferrum ppm: 10
PH Value (50g/L:2C): 2.8-3.0
Chelation Value mg (CaCO3)/g: 339
Loss on Drying %: 0.20
Packing
55.12lb paper bag, 40 bags per pallet
2204.6 LB Supersacks
Ethyl Vanillin FCC is used as a flavoring agent that is a synthetic vanilla flavor. It is used in ice cream, beverages, and baked goods. It's also used as a Flavoring & Nutritional ingredient in animal feed. It is also used in Odor masking for perfumes and pharmaceuticals. Ethyl Vanillin FCC is used as chemical intermediate Personal Care, Cosmetics & Fine Chemicals.
Specifications
Appearance: Fine white to slightly yellow crystals
Identification: Pass
Assay: 99.0% Min
Melting Range:76 - 78oC
Loss on Drying: 0.5% Max
Residue on Ignition: 0.05% Max
Solubility: 1 g dissolves in 100 ml of water (50oC) or 5 ml in 95% Ethanol
Packing
EDTA Zinc is a powerful chelating agent and acts as a micro-nutrient in agriculture and horticulture. It is used as a fertilizer to overcome Zinc deficiency in plants, as well as a source of Zinc for those plants which require Zinc for their normal growth and higher yields. It also forms stable complexes with metal ions.
Specifications
Appearance: White Powder
Chelate Zn?%: 14.5 - 15.5 %
Water Insoluble: 0.1% Max
ph (1% Water Solution): 6.0 - 7.0
Packing
EDTA Manganese is mainly used as a chelating agent and plant nutrient in the agriculture industry. EDTA Manganese is widely used as an element required in foliar fertilization of soil application in the field of agricultural horticulture. EDTA manganese is also a trace element required in aquaculture and is a stable water-soluble metal chelator.
Specifications
Appearance: Light Pink Powder
Chelate Mn (%): 12.5-13.5 %
Water Insoluble: 0.1% Max
ph (1% Water Solution): 6.0 - 7.0
Packing
EDTA Iron is used as complexing agent, oxidizing agent, it is used in photographic materials developed spray and as a bleaching agent and plant nutrient for fertilizers.
Specifications
Appearance: Yellow Powder
Chelate Fe %: 12.5 - 13.5 %
Water Insoluble: 0.1% Max
Ph (1 % Water Solution): 3.8 -6.0
EDTA Value: 65.5 - 70.5 %
Packing
EDTA, Disodium Salt, Dihydrate is a chelating agent, a general chemical, and a sequestrant. As an agent for complexation. EDTA is mainly used as an additive to detergent, a chemical for photography, paper-making, and oil-field. It is also used as detergent for boiler cleaning and reagent in chemical analysis.
EDTA Disodium
WC Code: 04-087-02
Sales Specifications
Appearance: White Crystalline Powder
Content: 99.0% Min
Chloride: 0.020% Max
Sulfate: 0.020% Max
NTA: 1.00% Max
Heavy Metals: 10 PPM Max
Ferrum: 10 PPM Max
Chelating Value: 265 mg (CaCO3)/g Min
pH (50g/L:25oC): 4.0 -5.0
Packing
Deodorized kerosene is clear and low-sulfur, also known as low-odor and narrow-cut Kerosene or Low odor base Solvent . It is common industrial chemical used as a degreaser and in kerosene burning heaters, lanterns and stoves. Deodorized kerosene is a particularly good chain lubricant cleaner prior to reapplying lubricant. Deodorized Kerosene is ideal for dilution of oils and other organic fluids for determination of metal traces. It is used in paints & coatings, consumer products, printing inks and agricultural chemical applications. It is also used in food contact applications such as aluminum rolling.
Sales Specification
Appearance: Clear Liquid
Density (@ 15C): 0.7900 - 0.8250 g/cm3
Water:
Pour Point:
Viscosity (20C): 2.00 3.10 mm2/s(cSt)
Viscosity (40C):
Cu Corrosion (100C, 3 Hr): 1.0 Max
Bromine Index:
Benzene: 1.0 PPM Max
T-Aromatics: 300.00 PPM Max
Sulfur: 1.00 PPM Max
Saybolt Color: 30 Min
Aniline Point:
Flash Point: 74.0C Min
Distillation IBP: 200.00C Min
Distillation (5%): 207.00C Min
Distillation (10%):
Distillation (50%):
Distillation (90%):
Distillation (95%): 235.0C Max
Distillation (DP): 240.0C Max
Packing
Di-2-ethylhexyl terephthalate (DOTP) is a general purpose plasticizer that is considered safer than ortho-phthalate plasticizers due to its excellent toxicological profile. It has uses in applications like extrusion, calendaring, injection molding, rotational molding, dip molding, slush molding and coating. As well as its uses in the plastics industry it is also commonly used in the paints and varnishes industry. DOTP is used in a number of other processes and products including the manufacture of high-temperature cables, automotive plastic parts and leatherette. It is extensively used in paper finishing in the calendaring process.
Specifications
DMDM hydantoin is a preservative in cosmetics and personal care products. It works by slowing and preventing spoilage in products such as shampoos and hair conditioners, and in skin care products like moisturizers and makeup foundations. This is a formaldehyde-releasing agent and may cross reaction in formaldehyde sensitive individuals. Other applications include uses in Adhesives, Antiarrhythmic agents, Anticonvulsive agents, Color photography, Copy Paper, Cutting oils, Floor waxes, Inks, Latex paints, and Polymers.
Sales Specification
Appearance: Clear Colorless, Free from Foreign Material
Odor: Matches with Standard
Color(APHA) Max: 10.0
Total Formaldehyde: 17.0 -19.0
Free Formaldehyde: 0 - 1.0
Water Content(Karl Fisher)%: 44.0 - 46.0
pH as is@27- 0.2C: 6.5 - 7.5
DMDMH Content: 54% Min
Packing
551.15 LB drum, 4 drums per pallet
2204.60 LB tote
Disodium Phosphate Anhydrous Food Grade is used mainly as a chelating agent, preservative, pH buffer, stabilizer and emulsifier in food industry. It works as an Emulsifier which helps to bind fats and water together in goods like Cheese, whipped cream, milk, and other dairy products which have a unique textures and consistencies because of disodium phosphate anhydrous food grade. Disodium phosphate Anhydrous Food Grade is used as a pH Controlling agent in cosmetics, skin creams, and shampoos. It can also be used in food and cosmetics to prevent rust in packaging.
Disodium Phosphate Anhydrous, Food Grade (Wintersun)
WC Code: 04-023-02
Sales Specification
Appearance, Visual: White Odorless Powder
Assay/ Content, %: 98
Water Insoluble, %: 0.2
Arsenic as As, ppm: 3
Heavy Metal, as Pb: 10
Lead as Pb, ppm: 4
Fluoride as F, ppm: 50
Loss on drying, %: 5.0
Packing
d-Limonene FCC, a refined solvent with a distinct citrus odor, is a versatile and powerful product derived from citrus peels. d-Limonene is used as a solvent and fragrance additive in cleaning products such as soaps and laundry detergents ,personal care products like shampoos, lotions, perfumes, cosmetics ,air fresheners, aromatic oils, insect repellant and pharmaceuticals. It also has industrial applications, for example, as a solvent in degreasing metals prior to industrial painting and in paints, for cleaning in the electronic the electronic and printing industries. It is used in the manufacturing of resins, as a wetting and dispersing agent, and in insect control. Its also used in food and beverages, d-Limonene has been used in non-alcoholic beverages, ice cream and ices, sweets, baked goods, gelatins and puddings, and chewing gum.
Specifications
d-Limonene: 94.0% Min
Refractive Index (@ 20oC): 94.0%
Specific Gracity (@ 25oC): 0.841
Packing
1,4-Dibromobutane is used as an intermediate involved in the synthesis of active pharmaceutical ingredient and other organic compounds. It is also used in the investigation of metabolism of two halopropanes such as 1,3-dichloropropane and 2,2-dichloropropane. Further, it acts as a reagent to prepare diazadioxa oxovanadium(IV) macrocyclic complexes.
Physical And Chemical Properties
Physical State: Clear to pale yellow liquid
Melting Point: -20 C
Boiling Point: 197-199 C
Specific Gravity: 1.78-1.81
Solubility in Water: Slightly soluble
PH: 6-7
NFPA Ratings: Health: 2; Flammability: 1; Reactivity:0
Flash Point: < 100 C
Stability: Stable under ordinary conditions
Sales Specification
Appearance: Clear or tiny yellow liquid
Melting point: -16.53 C
Boiling point: 197-198 C
Relative density: 1.7890 (20 C)
Refractive index: 1.5190 (20 C)
Content: 99 % Min
Moisture: 0.05 % Max
PH: 6.0-8.0
Nonvolatile: 50 PPM Max
Packing
250 KG metal drum, 4 drums per pallet
DOT Transportation
UN Number.: 2810
Proper Shipping Name: Toxic, liquid, organic, N.O.S.
Hazard Class: 6
Packing group: III
Copper Sulfate Pentahydrate is the most common sulfate salt of copper. The blue, crystalline inorganic compound is used as a root killer in both agriculture and non-agricultural settings. In the textile industry, Copper Sulfate Pentahydrate is used as a mordant in natural dyeing processes.
Sales Specification
