LDPE FOIL , 2% color post production; 0.5% non LDPE
L-isoserine is used as biochemical reagent and food additive. Min. Order Quantity: 1 kg. FOB Price: 200 dol./kg.
Carbomer 940 Polymer Gel Thickening Agent Cosmetic Grade (Carbopol/Polygel 940) Ideal thickening agent for make-up and hand gels Also known as Carbo 940 and Polygel 940 Thanks to a high-quality thickener, to obtain a stable gel emulsion or cream is elementary, even at home. Whether you are a professional or a beginner, working with the gelling agent of the new generation Carbomer 940, it is very easy to achieve high-quality cosmetic consistency (gel, cream). Characteristic of Carbomer 940: This cosmetic component is a white powder that mixes well with water and oils. For cosmetic use is recommended about 0.1-0.5%. The initial pH level is 3-3.3, however, with an increase in acid-base balance (over 6), the cosmetic mass is converted into a gel-like substance. The basic principles of working with Carbomer 940 thickener: - introduce stabilizers; - Carbomer 940 mixed with water or oils (leave for half an hour); - enter assets with low pH (acid); - introduce high pH assets (if available in the recipe); - balance the pH to a value of 6-7; - enter neutral assets; - at the last stage, introduce a preservative with a neutral pH (or according to the scheme above). Action Carbomer 940, as part of cosmetics: - excellent stabilizer; -forms transparent gel formulations (non-sticky); - creates a moisture-retaining / protective film; - has a biological neutrality with respect to other components of the formulation.
Wooden crates and boxes. Options: sizes, colors and models possibly to be according customer's requirements.
Heat sinks (Heat exchangers) for LED headlights in different shapes.
Origin: Kingdom Of Saudi Arabia , Destination: Cif Answ, Quantity: Subsequent Deliveries Of 100, 000mt (+/- 5%) For (12) Months Period, Unit Price Cif: Usd$200/mt, Payement Terms: Irrevocable, Confirmed By 20top Bank, Non Transferable, Auto Revolving, Non Operative Dlc/mt700 With An Amount Equal To One (01) Month Shipment To Guarantee Payment. Seller Issues P.Pop And Pb10% To Activate Dlc. 100% Payable Via Swift (mt103/tt) Bank Transfer Within 2 Banking Days After Delivery At Port Of Destination. Operational Working Procedure For The Required Product: 1. Seller's Mandate Issues Sco (done) 2. Buyer Issues Icpo + Company Profile + Clear Color Copy Of Passport+ Full Banking Information. 3. Seller Issues Fco 4. Buyer Contersigns Fco And Return It With Draft Dlc/mt700 5. Seller Issue Sales And Purchase Agreement (spa) Open For Amendment Buyer Returns To The Seller Countersigned (spa) 6. Seller Verifies And Signs Fina Contract And Forwards To The Buyer Via Official Email With Commercial Invoice 7. Within 02 Banking Days, Buyer Returns To The Seller Contersigned Commercial Invoice 8. Within Ten (10) Banking Days After Issuing Commercial Invoice, Buyer's Bank Issues Irrevocable, Non Transferable, Auto Revolving, Non Operative And Confirmed Dlc/mt700 With An Amount Equal To One (01)month Shipment To Guarantee Payment 9. Within Ten (10) Banking Days After Confirmation Of The Dlc/mt700, Seller's Bank, To Activate Dlc/mt700, Issues Operative And Confirmed Pb10% Of The Amount Of Montly Quantity Value With P.Pop And Authorization To Make Physical Visit. 10. Within 30 Banking Days After Activation Of The Dlc By Seller's Bank, Shipment Commences. 11. Buyer's Bank Releases The Payment By Mt103, Within 02 Banking Days After Receiving Full Documentation And Q&q Sgs At Discharging Port: 12. Within 02 Banking Days After Receipt Of The Payment Via Mt103, Seller Pays Both Side Mandates In The Transaction According Ncnda/imfpa And Subsquently Monthly Shipment Continues As Per Terms And Conditions Of The Sales And Purchase Agreement Contract Between Buyer And Seller. Guidelines To Note When Preparing Documents Icpo: 1. The Icpo Must Be Addressed To End Seller 2. The Above Procedures Must Be Accepted And Incorporated In The Icpo Word For Word. 3. Expired Icpo Not Accepted. Maximum Validity Of Icpo Is 03working Days From Issue Date 4. The Letterhead Is Genuine, Check For Any Signs Of Cut And Paste Or Scan And Edit. In The Letterhead We Need Complete Company Name, Address, Phone Number, Fax Number And Email Address.
FOB UNCONDITIONAL DTA, PROCEDURE (TANK TO VESSEL) 1. Buyer sends ICPO to Seller on receipt of Seller's Soft Offer, along with CPA or Q88, as proof of storage availability and readiness to inject after a successful DT, along with scan of Buyers Passport Info. 2. Seller issues Draft contract /commercial invoice CI, for the available quantity in the storage tank to Buyer, Buyer Signs and returns CI to Seller and parties sign the NCNDA/IMFPA. 3. Seller sends the following to Buyer a) Injection Report b) Sellers Tank Receipt. c) Authorization to visit and verify ATV d) Authorization to Sell and Collect ATS e) Product Passport 4. Buyer extends Seller tank for 3 days, to enable the DTA, for a DT and Buyer pays and conducts DT in Sellers tank, after 3 days validated. 5. After a successful Dip Test DT, Buyer provides vessel details (Q88 and CPA) and submits an NOR to prepare for injection of product into Buyers vessel 6. Seller shall immediately submit the SGS Report along with the full Proof of Product to the Buyer. Seller proceeds with product injection into Buyers Vessel. 7. Buyer makes 100% payment by MT103 TT wire transfer for the total product within 78 hrs and Seller transfers the Title Document into Buyers name. 8. Seller supplies Buyer with: ATSC Seller Export License 9. Seller pays commission to all intermediaries involved in the transaction 24 hours after confirmation of the Buyers Payment, for initial Spot, as well as each subsequent contract shipment. 10. Seller submits a draft SPA to Buyer, for review for R&E monthly shipments. 11. Buyer receives and approves the SPA, and issues an Irrevocable, Non- transferable, Revolving SBLC/IRDLC for 12 months shipment value, documentary letter of credits for length of contract and for each lift per schedule, inclusive of PB 2%. . Buyer pays after Dip Test by MT 103 wire transfer on each monthly shipment. 11. The subsequent deliveries shall commence accordingly.
FOB UNCONDITIONAL DTA, PROCEDURE (TANK TO VESSEL) 1. Buyer sends ICPO to Seller on receipt of Seller's Soft Offer, along with CPA or Q88, as proof of storage availability and readiness to inject after a successful DT, along with scan of Buyers Passport Info. 2. Seller issues Draft contract /commercial invoice CI, for the available quantity in the storage tank to Buyer, Buyer Signs and returns CI to Seller and parties sign the NCNDA/IMFPA. 3. Seller sends the following to Buyer a) Injection Report b) Sellers Tank Receipt. c) Authorization to visit and verify ATV d) Authorization to Sell and Collect ATS e) Product Passport 4. Buyer extends Seller tank for 3 days, to enable the DTA, for a DT and Buyer pays and conducts DT in Sellers tank, after 3 days validated. 5. After a successful Dip Test DT, Buyer provides vessel details (Q88 and CPA) and submits an NOR to prepare for injection of product into Buyers vessel 6. Seller shall immediately submit the SGS Report along with the full Proof of Product to the Buyer. Seller proceeds with product injection into Buyers Vessel. 7. Buyer makes 100% payment by MT103 TT wire transfer for the total product within 78 hrs and Seller transfers the Title Document into Buyers name. 8. Seller supplies Buyer with: ATSC Seller Export License 9. Seller pays commission to all intermediaries involved in the transaction 24 hours after confirmation of the Buyers Payment, for initial Spot, as well as each subsequent contract shipment. 10. Seller submits a draft SPA to Buyer, for review for R&E monthly shipments. 11. Buyer receives and approves the SPA, and issues an Irrevocable, Non- transferable, Revolving SBLC/IRDLC for 12 months shipment value, documentary letter of credits for length of contract and for each lift per schedule, inclusive of PB 2%. . Buyer pays after Dip Test by MT 103 wire transfer on each monthly shipment. 11. The subsequent deliveries shall commence accordingly.
We can supply you with copper slag (low Cu content) in good quantity.
We can supply you with good quantity of steel slag and mill scale.
Bovine serum albumin is wide range of comercial uses depending on grade, purity and qualiti og the product. Min. Order Quantity: 100 gr. FOB Price: 600 dol. per 100 gr.
Your long load material handling solution A-Lift is 3 wheels driven multidirectional Forklift truck with travel mast. It combines the features of three different Forklift trucks: ¡ñForklifts for side handling of long loads in aisles, ¡ñForklifts for front handling of pallets and more compact loads, ¡ñFour-way (Multidirectional) Forklifts. In lengthwise drive, steerable is the rear wheel. In crosswise drive, steerable are the front two wheels. The four direction lever-switch enables a quick direction selection for lengthwise and crosswise driving. A-Lift ¨C Benefits: ¡ñcombines the features of three different Forklift trucks; ¡ñvery manoeuvre: it moves in all directions without turns and the additional maneuvering; ¡ñit works effectively in different road conditions, thanks to the all wheel drive; ¡ñlow operational expenditures and convenience in the maintenance: the hydrostatic motors are easily accessible from any side of the forklift and it is extremely simple in the maintenance and repair; the access to the engine, the radiator and other units is also simple. ¡ñthe forklift truck can move the loads lengthwise and breadth wise A-Lift ¨C Areas of application: ¡ñProduction of Wooden framings, Steel materials, Concrete articles, PVC extruded pipes, Aluminum extruders, Window articles, ¡ñProduction of home, office, kitchen furniture, ¡ñHandling of outdoor panels and different materials. CHARACTERISTICS - 4-way operation, - mast travel mechanism, - wheels base 3x3, - the three hydrostatic driven and steerable wheels allow from static position movement in any direction (forward, backward, on left, on right), - the mast travel mechanism allows that the overall width of the good to be fitted in the overall dimension of the truck, - the width of the aisle can be equal the width of the forklift (2,3 m), - optional equipment: cabin, heater, catalyser, air-conditioner, lights, attachments, buzzer. Multifunctional movement in four directions makes A-Lift indispensable for working with long goods in small corridors, which helps to optimize your store. The machine works equally well both inside and outside, as it is available in LPG and diesel. Capacity varies from 4t to 20t, which allows the use of machine in various fields of industry. These major advantages save time and money in your company, providing flexible solutions for organizing and optimizing your storage. A-Lift trucks are distinguished by high productivity, safety, comfort and simplicity of service. APPLICATIONS They are extremely suitable: - for handling of long and large loads; - for work in confined corridors, racking systems and storerooms; - for handling of loads with large dimensions and weights from 4t to 20t (Wooden framings, Steel materials, Concrete articles, PVC extruded pipes, Aluminum extruders, Window articles and others) ADVATAGES - mainly in the ability to store goods in the length of the corridor, without changing the direction of movement within the corridor; for front storing in deaf corridors from/on lorries, platforms and others. - eliminating the necessity of high lifting, (by transportation) which allows safer transport and stability of the machine;
M...EK Wire rope hoist with monorail trolley and low headroom M...ED Wire rope hoist with double-rail trolley Capacity 1000 - 16 000 kg 3200 - 32 000 kg (special executions - up to 100 000 kg) Reeving 2/1; 4/1; 4/2 2/1; 4/1; 4/2 (special executions - 6/1; 8/2; 2x4/1) Lifting height 5,5 - 40 m 5,5 - 44 m Lifting speed 2,5 - 12 m/min (special executions - up to 16 m/min) speed ratio - 1:6; 1:4 1, 2 - 12 m/min (special executions - 16 m/min) speed ratio - 1:4; 1:6 Troley speed 12, 15, 20, 24, 30, 38 m/min speed ratio - 1:4; 1:3 12, 16, 20, 25 m/min speed ratio - 1:4; 1:3 Geuge 1000 - 2800
C10MS.10 C10MS.12 C13ST.6 C13ST.8 C13MBT.10 C13MBT.12 C13MBT.14 CAPACITY: Centers height mm 370 400 400 Swing over bed mm 730 800 800 Swing over cross slide mm 485 540 540 Swing in gap mm 920 1050 1050 Width of bed mm 520 540 540 Distance between mm 1000, 1500, 2000, 1500, 2000, 3150, 1500, 2000, 3150, centers 3000, 4000 4400, 5000, 6200 4400, 5000, 6200 SPINDLE: Spindle bore mm 260 315 230 290 260 310 356 Spindle nose DIN /11 DIN/12 160 210 350 410 470 HEAD STOCK: No. of spindle speeds 12 24 24 18 18 Spindle speed range rpm 8 - 400 6.3 - 850 6.3 - 670 / 6.3 - 315 Main motor power kW 11 (15) 15 (18.5) 15 (18.5) FEEDS: Number of feeds 76 88 88 Longitudinal feed range mm/rev 0.02 - 7.02 0.13 - 30.72 0.13 - 30.72 Cross feed range mm/rev 0.01 - 3.53 0.04 - 9.216 0.04 - 9.216 THREADS: Number of threads 64 62 62 Metric thread range mm 0.5 - 150 1 - 240 1 - 240 Inch thread range tpi 60 - 13/64 60 1/4 60 1/4 Module thread range Module 0.125 - 37.5 0.5 - 120 0.5 - 120 DP thread range DP 240 - 13/16 120 - 1/2 120 - 1/2 CARRIAGE: Cross slide travel mm 420 420 420 Top slide travel mm 145 200 200 TAIL STOCK: Quill diameter mm 105 110 (120) 110 (120) Quill taper Morse No.6 No.6 No.6 Quill travel mm 200 280 280 NET WEIGHT FOR DBC: 1000 mm Kg 4960 5180 - - 1500 mm Kg 5210 5430 4600 5000 2000 mm Kg 5460 5680 5100 5500 3000 mm (3150 mm) Kg 6300 6520 5700 6100 4000 mm (4400 mm) Kg 6820 7040 6500 6900 5000 mm Kg - 6900 7300 6200 mm Kg - 7900 8300.
KT20H Load-lifting capacity: 1000, 2000 and 2500 kg Height of lifting: 115 mm Length of the forks: from 750 up to 1800 mm Width of the forks: 540, 685 mm
Standard Machine Specification LCC 800 LCC 1000 LCC 1250 CAPACITY: Centers height mm 410 510 625 Swing over bed mm 890 1090 1320 Max. turning diameter over guideways for lathes with turret head mm 750 750 1000 Swing over cross slide mm 490 690 940 Swing in gap mm 1050 1250 1500 Width of bed mm 700 Distance between centers mm 1500, 3000, 4000, 5000 Max. turning length in chuck and live center for lathes with turret head mm 1150, 2650, 3650, 4650 MAIN SPINDLE: Spindle bore mm 155 Spindle nose DIN55027 No. 15 Spindle hole internal taper Metric 160 Front bearing diameter mm 200 HEAD STOCK: Spindle speed in two ranges rpm 2 - 250; 8 - 1000 Main motor power kW 30 Spindle max. torque Nm 5000 FEEDS: Longitudinal feeds (Z-axis) M/min 10 (max) Cross feed (X-axis) M/min 10 (max) Rapid traverse (Z-axis and X-axis) M/min 10 (max) Crosslide maximum travel mm 525 525 650 Z-axis feed torque N.m. 26.1 X-axis feed torque N.m. 10 CNC SYSTEM Options HEIDENHAIN, FANUC, SIEMENS, FAGOR TOOLHOLDER TURRET HEAD Tool section mm 40 x 40 Diameter of boring bar mm 40 Turret head position number 8 or 12 TAIL STOCK: Quill diameter mm 125 Quill internal taper Morse No.6 Quill travel mm 250 Tailstock movement Motorized NET WEIGHT DBC 3000 mm Kg 8800 9300 9800
Technical data OL 220 DG OL 222 DG OL 220 DGH OL 220 DGA Type Saw-frame rotation range – left/right Manual 45° - 30° Manual 45° - 30° Semi-automatic 45° - 30° Automatic 45° - 30° Maximum cut off stock Cutting at angle 90° mm 240 240 240 240 mm 220 220 220 220 mm 275x200 275x200 275x200 250x200 Cutting at angle 45° mm 200 200 200 200 mm 175 175 175 175 mm 190x120 190x120 190x120 190x120 Cutting at angle 30° mm 130 130 130 130 mm 125 125 125 125 mm 130x80 130x80 130x180 130x80 Material level mm 960 960 960 950 Minimum rest in automatic mode mm x x x 380 Sawing speed m/min 30 / 60 30 / 60 30 / 60 (15 – 70) 30 / 60 (15 – 70) Saw blade dimensions mm 2940x27x0.9 2940x27x0.9 2940x27x0.9 2940x27x0.9 Stock feeding: single mm x x x 500 repeatedly mm x x x 1000 Power of: main motor kW 1.1 / 1.5 1.1 / 1.5 1.1 / 1.5 (2.2) 1.1 / 1.5 (2.2) cooling motor kW 0.18 0.18 0.18 0.18 hydraulic motor kW x x 0.25 0.75 brush kW x x x 0.09 Capacity of: hydraulic l 1.5 1.5 6 15 cooling l 15 15 15 15 Overall dimensions (LxWxH): mm 1500x800x1600 1500x800x1600 1500x800x1600 1500x2400x1600 Net weight kg 475 475 500 1200
Turning tools with indexable carbide inserts Cutters with indexable carbide inserts. Drills with indexable carbide tools High speed steel blanks for lathe tools. Toolholders, collets and tips Live and dead centers for lathes. Reduction sleeves Circular saws, hand- and power hacksaw blades. Multidisk "SIGMA" clutches and brakes . And many others by customer’s request.
General purpose on copy-milling operations in materials of medium to high tensile strength such as steels up to 1300N/mm, cast iron, aluminum, copper and non-ferrous metals.
Property PE 100MA PE 130MA PE 160MA PE 200MA Nominal press force: 1000 kN 1300 kN 1600 kN 2000 kN Carriage strokes: 18, 30, 51, 72, 85, 98, 115, 129, 146, 150 (mm) 19, 25, 38, 60, 82, 102, 120, 140, 155, 165 (mm) 20, 28, 43, 60, 77, 94, 117, 131, 149, 167, 180 (mm) 21, 33, 61, 117, 143, 165, 184, 200, 211, 220 (mm) Carriage height regulation: 100 (mm) 100 (mm) 100 (mm) 110 (mm) Maximum number of strokes/min: 65 60 50 45 Distance carriage - table: 400 (mm) 440 (mm) 460 (mm) 520 (mm) C-Frame depth: 330 (mm) 360 (mm) 400 (mm) 420 (mm) Working height of the table: 800 (mm) 800 (mm) 800 (mm) 800 (mm) Distance between the columns: 440 (mm) 490 (mm) 530 (mm) 510 (mm) Bolster plate dimensions: 1100x660x80 (mm) 1200x660x80 (mm) 1300x780x90 (mm) 1400x800x100 (mm) Electrical motor power 7.5 (kW) 11 (kW) 15 (kW) 15 (kW) Power of the auxiliary electrical motor regulating the carriage lifting 0.75 (kW) 0.75 (kW) 0.75 (kW) 0.75 (kW) Machine weight without tools and accessories: 8600 (kg) 9800 (kg) 14000 (kg) 16000 (kg) Power supply/frequency/phase ~ 380 V, 50 Hz, 3f ~ 380 V, 50 Hz, 3f ~ 380 V, 50 Hz, 3f ~ 380 V, 50 Hz, 3f Pneumatic system pressure 5.5 – 6 (bar) 5.5 – 6 (bar) 5.5 – 6 (bar) 5.5 – 6 (bar) Maximum number of clutches per minute 15 (cl/min) 15 (cl/min) 15 (cl/min) 15 (cl/min) Maximum weight of the instrument mounted on the carriage: 180 (kg) 300 (kg) 500 (kg) 500 (kg)
