Magnesium oxide (mgo) board Magnesium Oxide Board (or MgO Board) is a technologically advanced building material that offers superior performance in every category when compared to traditional wood, gypsum and cement based products. Magnesium Oxide Board is virtually impervious to fire, water, insects; does not feed mold or mildew; is non-toxic, non- flammable and non-combustible; is durable, maintains its dimensional stability-even when wet; and, has exceptional bonding surface. Magnesium Oxide Board is a mineral based green builder product. And it is homogeneous-no de-lamination. Benefits & Advantages: Non-Toxic material safe to cut Resistance to fire, moisture, and wood boring insects Lightweight easy to nail & screw ASTM & ANSI tested Less energy required to install Long lasting materials reducing repair and replacement costs No silica-based Portland cement Post-consumer recycled content Silica/asbestos-Free Advanced Magnesium cement replaces ordinary Portland cement Can be used in the place of traditional drywall or cement boards. No special tools required. Solid construction no laminations Available in colors. Applications: In many applications, MgO boards can be used in the same ways as gypsum and Portland cement sheathings. The substitution is not fully direct in terms of sheet thicknesses, fastening methods and joint treatments, but is very similar. This makes MgO board an easy product to use. The possible uses of MgO board are vast, and some of them include: Firewalls Partitions. Structural sheathing for wood or metal stud walls. Shower stall tile backer board. Facings for structural panels engineered to use MgO as the facing. Shaft liners. Ceilings. Soffits. Fascia. Substrates for coatings and insulated systems (such as Direct-Applied Finish Systems, EIFS,and stucco). Item Size Thickness weight Quantity/20GP(pallet packing) 1 1220*2440mm 3mm 10kg 1800pcs 2 1220*2440mm 4mm 14kg 1300pcs 3 1220*2440mm 6mm 18kg 1080pcs 4 1220*2440mm 8mm 24kg 808pcs 5 1220*2440mm 10mm 28kg 648pcs 6 1220*2440mm 12mm 34kg 540pcs
Magnesium oxide (mgo) board Magnesium Oxide Board (or MgO Board) is a technologically advanced building material that offers superior performance in every category when compared to traditional wood, gypsum and cement based products. Magnesium Oxide Board is virtually impervious to fire, water, insects; does not feed mold or mildew; is non-toxic, non- flammable and non-combustible; is durable, maintains its dimensional stability-even when wet; and, has exceptional bonding surface. Magnesium Oxide Board is a mineral based green builder product. And it is homogeneous-no de-lamination. Benefits & Advantages: Non-Toxic material safe to cut Resistance to fire, moisture, and wood boring insects Lightweight easy to nail & screw ASTM & ANSI tested Less energy required to install Long lasting materials reducing repair and replacement costs No silica-based Portland cement Post-consumer recycled content Silica/asbestos-Free Advanced Magnesium cement replaces ordinary Portland cement Can be used in the place of traditional drywall or cement boards. No special tools required. Solid construction no laminations Available in colors. Fire Resistance limit of fireproof MgO board: 9mm Wellyoung MgO board could be applied for >= 120mins fireproof lightweight partition wall; 12mm Wellyoung MgO board could be applied for >= 180mins fireproof lightweight partition wall. The data is for reference only. Please contact us for more details on fireproof MgO board in different specifications. Material Comparison between Fireproof MgO board and other kinds board Advantages 1.Fireproof: Wellyoung MgO board reaches the standard of GB8624, CLASS A1, non-combustible class 2.Water proof: Wellyoung MgO board can keep its shape and character after soaking in water for a few days. 3.Sound insulation and heat insulation Wellyoung MgO board have a good sound insulation and heat insulation quality. 4.Environmental protection: Wellyoung MgO board is asbestos-free, no formaldehyde and benzene,100% green boards. 5.Easy to install: can be sawing, planning, drilling, nailing and cutting etc. 6.Lightweight and Strong strength Product Specification size:4*8/9/10ft thickness:3-20mm
Product Features Wellyoung MGO tile backer board is a ceramic tile underlayment that is manufactured from magnesium oxide as its primary ingredient rather than portland cement. The construction of this product offers a better environmental alternative and an upgrade to replace gypsum drywall and cement underlayment boards. it is a durable, water-resistant environmentally-friendly product that is suitable for use as a tile backer on countertops and floors Product Specification tem no. Size(mm) Weight(kg) Quantity/20GP(pallet packaing) 3048 1220x2440x3 10 1800 pcs 4048 1220x2440x4 14 1350 pcs 6048 1220x2440x6 18 1080 pcs 8048 1220x2440x8 24 808 pcs 10048 1220x2440x10 28 648 pcs 12048 1220x2440x12 34 540 pcs
Product Features 1. Normal MgO board: one smooth, one rough surface; 2. Pasted with wall paper; 3. Coated with latex paint; 4. Glued with ceramic tile; 5. With a design of wood or water or other grain. Product Details What Is MgO Board? Magnesium Oxide board MgO board is a factory-made, non-insulating sheathing board product. It can be used for a number of applications including wall and ceiling linings, fascias, soffits, tile backing and underlayment. It is made of magnesium oxide, a type of mineral cement, and is commonly called simply MgO (pronounced emm-gee-oh) due to its chemical composition of magnesium (chemical symbol Mg) and oxygen (chemical symbol O). Think of MgO as a type of sheathing board (sort of like drywall or cement board) but with much-improved characteristics such as fire resistance, weather ability, strength, resistance to mold, mildew, and so on. Technical datas: TEST ITEM UNIT TEST RESULT Bending Strength Mpa 6MM Width: >18 Length: >15 9MM&12MM-18MM Width: >16 Length: >13 Water Absorption %
MgO Board Magnesium Oxide board MgO board is a factory-made, non-insulating sheathing board product. It can be used for a number of applications including wall and ceiling linings, fascias, soffits, tile backing and underlayment. It is made of magnesium oxide, a type of mineral cement, and is commonly called simply MgO (pronounced emm-gee-oh) due to its chemical composition of magnesium (chemical symbol Mg) and oxygen (chemical symbol O). Think of MgO as a type of sheathing board (sort of like drywall or cement board) but with much-improved characteristics such as fire resistance, weather ability, strength, resistance to mold, mildew, and so on. Product Features 1. Normal MgO board: one smooth, one rough surface; 2. Pasted with wall paper; 3. Coated with latex paint; 4. Glued with ceramic tile; 5. With a design of wood or water or other grain. Product Specification Item Size Thickness weight Quantity/20GP(pallet packing) 1 1220*2440mm 3mm 10kg 1800pcs 2 1220*2440mm 4mm 14kg 1300pcs 3 1220*2440mm 6mm 18kg 1080pcs 4 1220*2440mm 8mm 24kg 808pcs 5 1220*2440mm 10mm 28kg 648pcs 6 1220*2440mm 12mm 34kg 540pcs Appilications for mgo boad: In many applications, MgO boards can be used in the same ways as gypsum and Portland cement sheathings. The substitution is not fully direct in terms of sheet thicknesses, fastening methods and joint treatments, but is very similar. This makes MgO board an easy product to use. The possible uses of MgO board are vast, and some of them include:Firewalls. Partitions.Structural sheathing for wood or metal stud walls.Shower stall tile backer board.Facings for structural panels engineered to use MgO as the facing.Shaft liners.Ceilings.Soffits.Fascia.Substrates for coatings and insulated systems (such as Direct-Applied Finish Systems, EIFS, and stucco).
MGO board does not contain asbestos, but some have different types of micro fiber reinforcing. This reinforcing is separate from the surface scrim,and used to cast the MgO sheets. Product Specification size:4*8/9/10ft thickness:3-20mm Product Details mgo cladding also called: Widely applicable mgo board, glass magnesium board,fireproof magnesium oxide wall panel What Else is in mgo board? In addition to the base material of MgO, other types of magnesium cements, wood flour,andvarious additives are included to improve manufacturing and enhance various properties. Most mgo board has some type of fibrous reinforcement within the core and/or on the face. Often this takes the form of glass mesh, fibers, or a fine screed. mgo board also contains other additives to enhance flexibility and weather ability. In other words, there are various types of mgo board, but most are essentially the same in terms of their basic composition. MgO boardsare made as individual pieces that are cut to length as they are poured onto a castingtray. The initial set occurs horizontally, but the final cure occurs vertically or with spacebetween the sheets. The MgO is cast in a liquid slurrylike form (a mixture of MgO powder, and other additives and water) and sets up by chemical reaction - much like Portland cement does instucco or concrete. The cast boards are then cured at ambient temperature. Fire Resistance limit of mgo board: 9mm Wellyoung fire resistant board could be applied for >= 120mins fireproof lightweight partition wall; 12mm Wellyoungfire resistant board could be applied for >= 180mins fireproof lightweight partition wall. The data is for reference only. Please contact us for more details on fire resistant board in different specifications.
Magnesium Oxide boards are certified fire resistant, water resistant, high-impact interior and exterior construction panel. MgO panel's load capacity meets the requirements of both residential and commercial structures. With its mold resistance, fire resistance and high-impact properties, MgO boards could be used in high value areas i.e. safe rooms and equipment rooms or when health and safety concerns exist. MgO board is light tan to cream in color. Standard production material is very smooth on one side and sand textured on the other. Features Fire resistant (Grade A1) building material; Lighter, more flexible and stable than traditional sheeting systems; Time and material saving - dramatically reducing construction costs; Environmentally friendly, applying a sustainable production process with reduced CO2 footprint; Ideal for time, safety and health sensitive construction applications; Specification Dimensions (mm) Weight (kg) Quantity / 20'GP(in pallets) 3*1220*2440 9.5 1800pcs 6*1220*2440 19 1080pcs 8*1220*2440 25 808pcs 10*1220*2440 31.5 648pcs 12*1220*2440 37.5 540pcs 15*1220*2440 47 432pcs 18*1220*2440 56.5 360pcs 20*1220*2440 62.5 324pcs
Grey MgO Board Magnesium Oxide board MgO board is a factory-made, non-insulating sheathing board product. It can be used for a number of applications including wall and ceiling linings, fascias, soffits, tile backing and underlayment. It is made of magnesium oxide, a type of mineral cement, and is commonly called simply MgO (pronounced emm-gee-oh) due to its chemical composition of magnesium (chemical symbol Mg) and oxygen (chemical symbol O). Think of MgO as a type of sheathing board (sort of like drywall or cement board) but with much-improved characteristics such as fire resistance, weather ability, strength, resistance to mold, mildew, and so on. ItemSize Thickness weight Quantity/20GP(pallet packing) 11200*2000|2200|2300mm 3mm 10kg 2400pcs 21200*2000|2200|2300mm 6mm 17kg 1280pcs 31200*2000|2200|2300mm 8mm 23kg 960pcs 41200*2000|2200|2300mm 10mm 28kg 768pcs 51200*2000|2200|2300mm 12mm 34kg 640pcs Appilications for mgo boad: In many applications, MgO boards can be used in the same ways as gypsum and Portland cement sheathings. The substitution is not fully direct in terms of sheet thicknesses, fastening methods and joint treatments, but is very similar. This makes MgO board an easy product to use. The possible uses of MgO board are vast, and some of them include:Firewalls. Partitions.Structural sheathing for wood or metal stud walls.Shower stall tile backer board.Facings for structural panels engineered to use MgO as the facing.Shaft liners.Ceilings.Soffits.Fascia.Substrates for coatings and insulated systems (such as Direct-Applied Finish Systems, EIFS, and stucco).
Good Substitution of LCPP Paraffin PVC Plasticizer Plasticizer C02 Description C02 is specially used to replace GB standard chlorinated paraffin because paraffin has high viscosity, dense, low plasticity when used as plasticizer. It has obvious application advantage comparing with chlorinated paraffin. a. Good color, suitable for various of color or colorless down-stream products. b. High thermal stability, decomposition temperature is higher than same data of paraffin, resistance to processing, lighter smell. c. Good plasticizing efficiency, the plasticity is 1.5:1 compar ing with paraffin, replace s ame quantity chlorinated paraffin or 30% main plasticizer of paraffin. d. Good compatibility w it h PVC raw mat erial, 100% replace chlorinated paraffin. e. Competitiv e pric e, reduce production cost for down-stream enterprises. Applications 1. Passed SGS certificate compliance with EU RoHS, REACH, SVHC and BPA regulations. 2. Low Pt-Co, suitable for light color or colorless products. 3. Good stability, high plasticizing efficency, mix with main plasticizer not affect products quality. 4. Children toy products request eco-friendly plasticizer if necessary, B02 or F01 could replace 30-40% main plasticizer. Specification Pt-Co �300 Acid Value(mgKOH/g ) �0.30 Heating decrease volume(125 oC, 2 h) �0.50 Density g/ml(20 oC) 1.17-1.20 Viscosity(mm2/s) �200 Flash point(oC) >175 Price Delivery Port :Tianjin/Qingdao Packaging & Delivery Packing :200kg iron drum/20MT Flexibag/1MT IBC Drum Delivery Lead Time :within 10-20 days after receiving the deposit Supply Ability :20,000 ton/year
Low pt-co plasticizer special for medical gloves Plasticizer e01 Description E01 is kind of special plasticizer developed for medical gloves manufacturer which requests low viscosity plasticizer. Comparing to other plasticizers, our product is processed from food grade palm oil, it is eco-friendly plasticizer passed sgs certificate compliance with eu rohs, reach, svhc and bpa regulations. A. Viscosity obviously lower than same item of similar plastic Izer because some pvc products limit to use high viscosity additive B. Good stability, high plasticizing efficiency, combined with main plasticizer dotp, dinp or tbc will not affect finished product quality. C. Good compatibility with pv c raw materials, replace 30% main plasticizer. D. Competitive pric E, reduc es c omposite cost of gloves. Applications 1. Passed sgs certificate compliance with eu rohs, reach, svhc and bpa regulations. 2. Viscosity is 30 cst (40 ?), solve high viscosity limitation problem, not affects settlement behavior of paste resin. 3. High flash point >200 ?, compliance with processing requirements. 4. Good stability, high plasticizing efficency, mix with main plasticizer would not affect gloves quality. Specification Pt-co 60 Acid value(mgkoh/g ) 0.30 Heating decrease volume(125 oc, 2 h) 0.50 Density g/ml(20 oc) 1.00-1.05 Viscosity(mm2/s) 30 Flash point(oc) >200 Price Delivery port : tianjin/qingdao Packaging & delivery Packing :200kg iron drum/20mt flexibag/1mt ibc drum Delivery lead time : within 10-20 days after receiving the deposit Supply ability : 20, 000 ton/year
High Plasticity New Plasticizer Used for Plastic Flooring Plasticizer B02 Description Processed from food grade palm oil, B02 is eco-friendly plasticizer passed SGS certificate compliance with EU RoHS, REACH, SVHC and BPA regulations. a.Good color and low Pt-Co, suitable for various of PVC products manufacture, specially used in colorless and transparent PVC products. b.Good compatibility with PVC raw materials, replace 30% main plasticizer and more percentage could be achieved with main plasticizer DBP, DIBP. c.Normally used in winter due to the low freezing point. d.Good thermal stability, suit able for different PVC products manufacturers. e.Good plasticity, w orks better with main plasticizer such as DOP, DBP, DOTP, etc.. f.Cost effective, i t would be first choice on plasticizer for PVC products manufacturers on condition that ensure products quality. Usage widely used in PVC processing industry, special for plastic flooring, synthetic leathers, flex banner, etc.. Applications 1.Passed SGS certificate compliance with EU RoHS, REACH, SVHC and BPA regulations. 2.Low Pt-Co, suitable for light color or colorless products. 3.High flash point(>200ºC),satisfy processing requirements. 4.Good stability, high plasticizing efficency, mix with main plasticizer not affect products quality. 5.DOTP is main plasticizer in exported PVC floor, A03 could replace more than 50%. 6.Our product could be used in both base layer and medium layer of PVC floor. Specification Pt-Co 60 Acid Value(mgKOH/g ) 0.30 Heating decrease volume(125 oC,2 h) 0.50 Density g/ml(20 oC) 1.04-1.06 Viscosity(mm2/s) 50 Flash point(oC) >195 Price Delivery Port : Tianjin/Qingdao Packaging & Delivery Packing :200kg iron drum/20MT Flexibag/1MT IBC Drum Delivery Lead Time : within 10-20 days after receiving the deposit Supply Ability : 20,000 ton/year
PREPARATIONS The substrate, bolt and anchor holes must be clean, sound, dry and free of oil, grease, without laitance and loose particles. Prewet the bolt holes thoroughly, but no standing water in it. Before applying ITLS CA-007H absorbent substrates must be saturated thoroughly, but without standing water. MIXING Mix 3.2-4.4 liters of clean water with 25kg bag of ITLS CA-007H together. To add water based on the condition of stirring and keep stirring around 5 minutes until grouting well. APPLICATIONS Pour ITLS CA-007H mortar after mixing into the reserved cavities and recesses use the stick or bar to remove the air bubble, ensure that air entrapped into the grout is allowed to escape. Suggest to blend the grout by auto-mixer for better application. COVERAGE 25 Kg ITLS CA-007H when mixed with water will produce approx. 13.5 liters of Liquid Grouting Mortar. ITLS CA-007H suggest to be placed in thickness ranging from 10-15cm/layer.
DESCRIPTION Instant cement as material for leveling concrete floor which required high flatness level. With base elements of cement, selected sand, filler and additive all of which homogenously mixed. ADVANTAGES * Easy and ready to use, by water addition only. * Fast working * Practical and high adhesive power * Floor would be flat/ level in a second APPLICATION CA-010 is used as a floor screed material surface that canâ??t be exposed and should be covered with floor material, such as: ceramic, granite, carpet, parquet and other materials.
Various types of �ooring | Heavy construction equipment | Electrical lightings and �ttings Painting and wall decors | Bathroom and sanitary items | Tiles and Parquets Steel drums | HDPE pipes | Steel and Iron
PFC series hydraulic impact crusher has 45 degree feed chute with replaceable liners. The main frame can be opened by hydraulic device. Thick blow bars with locking tongue set into a replaceable backing bar seat. All curtain liners are interchangeable. Positive rotor lock to ensure the safety of persons who change the rotor. With the strengthening and toughening bear and replaceable backing bar seat, this crusher can be applied to the waste recycling materials processing. Final products are in a good product shape,the low proportion of conifer-like. Main Features 1). High reduction ratio and crushing efficiency; 2). No-board connection; The blow bar with high chrome (high chromed blow bar). 3). Impact plate with a special shape. 4). Crushed product with cubical shape. 5). Easy maintenance and reliable operation. 6). Discharge sizes can be adjusted. -
Quick details of lsaw Out diameter 325-1420mm (14â?³ -60â?³) Production process Jcoe Wall thickness 8-40mm Length 3-13m Standards Api 5l, astm a672, astm a53, sy/t5768 -2006, gb/t3091 -2008, gb/t9711 -1 Steel grades Q235, q345, l245, l290, a53, s235, s275, s355, gr.B/x42/x46/x56, a672 b60 cl22 Tpi Sgs, bv, moody, ccic can be arranged before shipment. Packing In bulk due to big sizes Surface treatment Anti-rust black painting, anti-corrosion treatment (fbe, 3pe, 2pe) Tpi ( third party inspection) Sgs, bv, moody, ccic Applications Liquid shipping like oil, water and fuel, building and constructions, chemical vegetation, power station, as well as foreign drill system.
Description CC-500 Dura-Shine is one component, aliphatic, UV resistant polyurethane based topcoat membrane. Product cures with the humidity and produces a transparent film and by this way it provides excellent adhesion over the entire surface. Feature Resistant to UV, exposed sunlight and chemicals When applied, it forms as seamless membrane without joints Product keeps its mechanical features over a temperature span of 40 to 90 degrees Celsius Use Area Roof terraces balconies and verandas Industrial floor coatings Stadium, car parks Stones, marble and ceramic surfaces Coverage Consumption of each layer: 0.1-0.15 kg/m2 Minimum two coats should be applied Total consumption: approx. 0.2-0.3 kg/m2 Recoating: Do not exceed 48 hours between each coats. Application must be repeated if this time is exceeded
Wall Guards: Product origin : China Key Specifications/Special Features : Vinyl 2/3mm Thick Strips White 3mtr Length X 200mm Width Minimum Order Size and Packgaing details : 50 Pcs. - Export Cartons Usage : Office/Hospital to protect from crash-double sided tape to install
Length 800mm,1000mm,1200mm Model DJB-800/420 DJB-1000/300 DJB-1200/300 Material 27simn Width 100mm Height 90mm Thickness 8mm Length 1000mm Processing quenching and tempering (heat treatment) Load capacity larger than 300kN -
DESCRIPTION a premium cement based finish skimcoat which contains selected filler, additive and polymer used for smooth finishing to uneven concrete wall & ceiling. After dry STARCOAT CN have a excellent adhesion to the substrate, better impact resistant, no powdery, no cracks, smooth and ready to be painted with water based wall paint. Easy to use, good workability and have a long pot life and correction time even at the outdoor applications. USES IN APPLICATIONS 1. Cement Based Wall Plaster. 2. Concrete Wall, Column & Ceiling 3. Precast Concrete & Concrete profile 4. Internal & External. ADVANTAGE * Light, good workability and sanding properties. * No cracks and hair cracks. (depends on background) * Smooth surface, solid and no powdery. * Can be painted or finished with wallpaper directly after dry in minimum 24 hours * without using PVA putty to leveling up & filling uneven rough surface. PRODUCT SPESIFICATIONS 1. Main Binder : Portland Cement & Polymer 2. Filler : Limestone 3. Color : GREY and WHITE. 4. Mixing Ratio : 7 - 8 litres of water per 25 Kg bags. or 28 - 32 % water demands. 5. Coverage : 1.25-1.3 Kg/m2/mm or 19m2/25 Kg/mm thickness average 7.5m2/25Kg for 2-3mm thickness 6. Thickness : 2mm thickness/coat 4mm for 2 coats and 6mm for 3 coats. 7. Pot Life : approx. 60 minutes SURFACE PREPARATION * The substrate must be clean and free from grease and loose particles. Recesses should be pre-patched and levelled where appropriate. * Porous and absorbent substrates must be pre-wetted prior to application of Starcoat CN finish coat.
