MFI 01~05 Content : PP & LL Color ~ White * Price may vary according to MFI etc. or as per company policy.
A product of Fusion, Fusion Wall Putty is a white cement-based putty. It bonds strongly with base surface and can be used both on dry and damp walls. Painters can apply Fusion Wall Putty to create a smooth and undulation-free surface on both interior and exterior walls to get that royal look. Use of Fusion Wall Putty can help in increasing the life of the wall by making it flake, abrasion, and water resistant. Properties Base: White cement, Quality polymers & specialty chemicals and fillers. Pot Life : 2hrs. Water Demand : 40 45% Coverage : 25 + 3 sft/mm/kg Thickness of layer : 2.0 mm (two coats).
Price per sack (25lbs) Partial lost circulation material for oil & gas drilling
Our isolation ist liquide , and it's easy for application. Our isolation can to applied with a brush. This is new type of isolation. can be applied to any material ( concrete, glass, metal). One layer applied with a brush, replaces 5 cm of styrofoam. This taype of isolation saves energy and is environmentally friendly. And most importantly it costs less than any insulation. We can to send free sample and technical documentation.
Silica fiber has excellent high temperature resistant and optical transmission performance, with widely clinical application. Standard SMA/FC connector Flat/air gap available Extension sleeve available in various colors Self-design on request Various tools available fiber cutter fiber stripper fiber connector cleaner,etc Standard length 3m, NA=0.22/0.37
Corrostop-15 which is a 3 in 1 Corrosion inhibiting concrete admixture tested & approved by IIT, Madras ,iNDIA with the below advantages. Advantages: 1)Works as Anti Corrosion for the TMT rods in Concrete & hence increases the building life 2)When Corrostop-15 is used, it reduces the water: cement ratio & completely seals the invisible pores in the concrete & hence acts as an excellent water proofing agent. Hence do not require separate water proofing chemical. 3)CORROSTOP-15 arrests the airline cracks in RCC roofing 4) Corrostop-15 can also be used as Wall plastering admixture with M-Sand which leaves the walls stronger with no air cracks. 5) Compatible with all grades of concrete.
Morter sec premesclat construction based on cement, sand and additius, Components - Ciment P�²rtland - Silica origin sand - Additiu. Continuous granulometry 0 a 2 mm Aigua de amassat % 13 â?? 15 % (aprox. 3,5- 4 litres per sac de 25 kg) Apparent density of morter endurit1800 kg/m3 aprox. Apparent density of fresh morter 1950 kg/m3 aprox. Medium compressive strengthâ?¥ 7,5 N/mm2 (with a consistency in the 175 �± 5 mm dust table Medium flexural strength â?¥ 3,0 N/mm2 Application time 45 â?? 60 minuts (depending on the support and environment) Application temperature between 5 �ºC y 35�ºC. Consumption 19,5 kg/m2 cm. aprox.
please contact me about cement head specifications, size, price, and I promise I'll provide you the good quality and price. We are a manufacturer and of cementing tools since 1997, and now we have almost 400 workers, the products cover cable protector, thread protector, cementing head/plug, stage collar, float equipment, liner hanger, centralizer, stop collar and so on.
ACCMON COD is Insulating Castable Refractory Cement in India by Calderys refractories. Used as Low Cement Castable for Refractory, DRI, Steel Making, Steel Making, Reheat Furnance, Iron Making, Foundry, Cement, Reheating Treatment, Rotary Kiln, Steel Ladle, Power & Incinerators. It is It has Optimum Hot Strength, High Density, Bearing Capacity, High Performance, Chemically Stable.
SUPRAMON FF L is a High Temperature Castable Refractory Product in India by Calderys refractories. These High Temperature Castable Refractory have Low Thermal Conductivity, Reduced Heat Loss, Reduced Slag Sticking & is used for Dense Castable Refractory, Castable Refractory Cement Forge, Moldable Refractory Cement, Used for Patching, Grey Treatment & Sg Iron Treatment.
Construction PU Sealant is a one-component, low-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to all typical construction materials such as cement based materials, brick, ceramic, glass, wood, galvanized and painted sheet iron and various plastics. Possesses permanent elasticity. 25 % movement capability. No surface tackiness after full cure. Do not pick up dirt. No shrinkage. Cures bubble-free. Enhanced storage stability. No sagging Thixotropic. Can be applied with hand gun and tooled easily. Paintable.
Consmos-- Hot Sale Super MDI E0 Glue FULL Pine OSB *Full pine materials, Big Flakes *E0 MDI glue, Waterproof *Produced by Big Auto Machine imported from Germany *Size: 1220*2440mm *Thickness: 9mm,11mm,12mm,15mm,18mm J
Great way to keep your walk and drive ways safe during the winter. This product will melt the ice within minutes of applying on the affected areas.
A blend of white cement, polymers and minerals, JP Wall Putty protects and smoothen walls and is effective on all type of cementitious surface. It is pure white in color and has strong adhesive properties which ensure a strong between the base and the paint making it an ideal surface for all interior and exterior walls.
Size 600 x 600mm, Material Porcelain Tiles, porcelain Usage Interior Tiles, floor tile Function Acid-Resistant, Antibacterial, Firebrick, Heat Insulation, Non-Slip, Wear-Resistant Surface Treatment Polished Tiles Surface finish Polished glazed tile Color Family WHITES Tile Type ACCENTS, Borders, Floor Tiles, Wall Tiles Water Absorption
Using brand new PVC power, quality guaranteed.
We design and make various industry defoamers, have good defoamers for concrete admixtures, water reducer.
Description: BOT is a one part, pre-blended, (coloured) mineral dry shake hardener for concrete comprising of cement, specially selected quartz mineral aggregates and admixtures BOT is one of the most effective ways to protect the surface and extend the life of the floor BOT may only be used by experienced professionals. BOT provides a hard wearing, mineral dry shake topping for monolithic floors. When sprinkled and trowelled into fresh wet concrete floors, it forms a wear resistant smooth surface. Typical uses are in warehouses, factories, shopping malls, public areas, where wear durable and wear resistant floor is the key requirement. Applications: - Airplane hangars - Electronic assembly plants - Manufacturing plants - Warehouses and distribution centers - Shipping and receiving areas - Maintenance facilities - Commercial and industrial floors subject to deicing salts - Where light-reflective flooring is desired - Floors subject to heavy or frequent traffic - Salt-storage facilities - Multi-purpose sporting facilities - Recreational facilities Converage: - Moderate duty 7-9 kg/m2 - Heavy duty 9-12 kg/m2 - Concentrated traffic 12-15 kg/m2 - Extra heavy duty +15 kg/m2 Advantages: - Prevents concrete damage due to abrasion, impact, punching, and scraping - Decline cost of maintenance during the life span of the floor. - Enhances the appearance of floor surface. - It adds texture and slip resistance - It is able to increase the value of an industrial building and improve building sale-ability - Dry shake is an economical way to add color which is not fade with time - It can help the floor to reflect more light, reducing lighting and energy requirements. Extended floor life Packaging: 25kgs barrel Colour: Grey and Green Shelf Life: 9 months
Description CPROTECT is a premixed metal silicat solution and is a ready to use surface curing compound. CPROTEC will create a microcrystalline film to fill the hole, prevents quick loss of water from the concrete, thereby helping the hydration of concrete to take place completely Application Use for newly poured concrete construction such as: - Foundation, Floors, workshop floor - Concrete roads and bridges - Airport and field concrete - Concrete applications where there is plenty of air flow and evaporation and where there is less moisture Technical information - More effective than exhausting curing methods such as sack or canvas laying or water wetting - Prevents shrinkage crack resulting from fast drying while concrete surface is cured - Water base, safely used in closed environments Application steps - Spray onto the concrete surface to be treated. Spray 2 coats. Each spray is 20-30 minutes apart Important note: - For optimum system performance, CPROTEC spraying must be carried out as soon as the concrete begin to face Storage conditions Product must be stored in original, unopened and undamaged sealed packaging in dry conditions Colour: Clear Shelflife: 12 months from days of production Consumtion - 2kg Liquid approximately 4 m2 / for 2 layer - 6kg Liquid approximately 12 m2 / for 2 layer - 30kg Liquid approximately 60 m2 / for 2 layer
Description VGROUT6 is a non-shrink, pourable cementitious grouting mortar with extended working time to suit local ambient temperatures. - Excellent flowability - Good dimensional stability - High strengths, adjustable consistency Product name: VGROUT6 Compressive strength: M60 (N/mm2) / 60 Mpa / 8700 psi Mixing ratio: - 25kgs powder: 4,0L water - 5kgs powder: 0,8L water ADVANTAGES - Easy to mix and apply - Flowable consistency (according to mix) - Rapid strength development - Non-corrosive - Non-toxic - Iron and chloride free - Shrinkage-compensated - Good pumping properties Application - Where exceptional one day and ultimate compressive strengths are required. - Applications requiring a pumpable grout. - Non-shrink grouting of machinery and equipment, base plates sole plates, precast panels, beams, columns and curtain walls. - Grouting of railing posts, foundations, windmills, compressors, etc. - For grouting rebar, bolts, dowels and pins, etc - Applications where a non-shrink grout is needed for maximum effective bearing area to transfer optimum load. Color: Gray powder Mixing: Add clean water to suitable mixing bucket. Mix slowly and continuously to form a homogeneous mixture - VGROUT6 25kg barrel required approximately 4.0 litres of clean water - VGROUT6 5kg barrel required approximately 0.8 litres of clean water The mixed materials is immediately ready to use and should be used within 30-60 minutes after mixing.
