Magnesia Bricks Application 1.Iron Steel Industry Fireproof magnesia brick used in steel making furnace lining, ferroalloy furnace, metal mixer furnace lining, converter lining, arc furnace wall and furnace bottom, soaking furnace, heating furnace bottom. 2.Non-ferrous metallurgical industry Magnesia refractory bricks used in copper,nickel,lead,zinc,tin smelting furnace lining, refined copper reverberatory furnace,ore electric furnace lining 3.Glass Industry Magnesia fire brick is suitable for glass furnace regenerator checker 4.Building Material Industry Magnesia brick have lime kiln,cement kiln
Advantages: 1.High purity. 2.Good thermal conductivity. 3.High refractoriness under load and high tridymite content. 4.Low true densit Application: 1.Widely used in hot blast stoves. 2.Used in high temperature sections of the checker chamber in hot blast stoves. 3.Used as low-cost alternative to andalusite and mullite checker bricks in hot blast stoves. 4.High refractoriness, average thermal shock resistance makes it suitable in consistent temperature environment. Technical Index: Item Silica Brick for Hot Blast Stove Wall bricks ,Dome Bricks Checker Brick SiO2 % Y95 Y95 A12O3 % ¨¹1.0 ¨¹1.0 Fe2O3 % ¨¹1.0 ¨¹1.0 Apparent Porosity % ¨¹22 ¨¹24 True Density g/cm3 ¨¹2.33 ¨¹2.33 Cold Crushing Strength MPa Y40 Y35 Refractoriness Under Load (0.2MPa) æ Y1650 Y1650 Residual Quartz % 1.0 1.0 Creep Rate 0.2MPa (155050h) % 0.6 ¨¹0.6 Permanent Linear Change ( 1450*2h) % ¨¹0.2 ¨¹0.2 Thermal Expansion Coefficient(1000æ) % ¨¹1.26 ¨¹1.26 Fumigated wooden pallet, using paper or non-woven fabrics between layers separated,plastic shrink film protected outside,finaly using straps. The size of wooden pallet is 95x95cm,95x100cm or as your requirements.
We are specialized in silica refractories for hot repairs of coke oven,glass furnace,which includes fused silica bricks,fused silica precast blocks,fused silica mortar,ceramic welding materials,conventional high duty silica bricks,silica mortar,fused silica ramming mix,gunning mix. Founder of our company is an expert of silica refracories in Sinosteel Refractories for more than 20 years.All the technical staff and control quality control staff are very expereienced,coming from Sinosteel Refractories,too.Passed qualification certification of ISO9001-2008. When the damage to the coke oven is so severe that holes could be observed,brick shaped fused silica precasted blocks have to be adopted to fill the gaps.The fused silica won't display observed thermal expansion,so no heat-up problems. Property of Fused Silica Precast Blocks Zero Expansion,so no heat-up problems Less joints,minimise the leakage of flue gas Save time and Equipment Application:for Hot Repair of Coke Oven,Revamp of Old Coke Battery,Ceramic Welding For further questions,please contact me: Contact: Judy Liu (Marketing&Sales)
Red Brick/Wall Brick Building Material Sizes 240x240x115 240x200x115 200x90x53 240x115x53 0,16$-0,29$ Ship to everywhere , contact for pictures and more information if your quantity is many, it can be cheaper
Mono Aluminium Dihydrogen Phosphate(MAPP) : 1.Properties: Aluminium dihydrogen phosphate is a type of colorless and odorless but extremely sticky liquid, freely soluble in water and solidifiable at normal room temperature.It has strong binding force in liquid or solid states and good resistance to peeling, high temperature, vibration and hi-temp air stream in addition to good infrared absorbability and insulativity. 2. Product application It is mainly used as binder and curing agent in the production of hi-temp refractory materials for kiln, spray paint, Fire clay, casting and foundry industry. It is a type of colorless and odorless but extremely sticky liquid, freely soluble in water and solidifiable at normal room temperature 3.Aluminium dihydrogen phosphate chemical examination report Item Standard Appearance Colorless Liquid White Powder P2O5 % 33±1 66±2 Al2O3 8±0.5 16±1 Iron oxide (Fe2O3)% 0.02 0.02 pH value 1.4~2.6 1.4~2.6
Silica brick is a refractory product containing SiO2 as a main component. Its SiO2 content is generally not less than 93%. Silica brick is an acidic refractory material. It has strong resistance to acid slag and good resistance to oxides such as CaO, FeO and Fe2O3. However, it has poor resistance to alkaline slag erosion and is easily oxidized by Al2O3, K2O and Na2O. Destruction by the action of matter. The softening temperature of the silicon brick load is as high as 1640~1680�°C, and the long-term use volume is stable under high temperature. However, silica bricks have poor thermal shock resistance and high refractoriness. When using silica bricks, pay attention to two points: when the silica brick is at 200~300�°C and 573�°C, the volume suddenly expands due to the crystal transformation. Therefore, the temperature rise below 600 �°C in the oven should not be too fast, when it is cooled to below 600 �°C. Dramatic temperature changes should be avoided; as far as possible not in contact with the alkaline slag. Application Coke oven, Hot blast stoves, Crown or Superstructure of glass furnace.
Magnesite brick, the content of magnesium oxide is more than 90%,periclaseas the main crystal phase of basical refractory brick. Magnesite with high temperature refractorness, high begining temperature of softing under loading,good alkali resistance of slag. According to differnence of the production technology and raw materials,it is names general magnesite brick and fused magnesite brick. Magnesite brick is mainly used for open hearth furnace,bottom and wall of the EAF,conventer, high temperature tunnel kiln,cement kiln,lime kiln, glass furnace regenerator. Any interests, get back to me at whatsapp008618848875625
High Alumina Bricks are produced with select bauxite chamotte as main raw material, fired at 1450-1470 �°C by advanced process with strict quality control. High Alumina bricks have great features like high temperature performance, great corrosion and wear resistance, high bulk density, low iron content, etc. High Alumina bricks are extensively used in mining, metallurgy, cement, and chemical, refinery and refractory industries. These bricks are used in all kinds of industrial furnaces and high temperature areas to prolong the lives of furnaces. High alumina bricks have high refractoriness, good acid and alkali erosion resistance, high temperature strength, thermal shock stability is good wait for an advantage, widely used in metallurgy, petroleum, chemical industry, building materials, thermal technology equipment mechanical processing, military industry and other industries.
AZS brick use high purity zircon, alumina and silica as its raw material. Our fused AZS blocks mainly inclue model AZS-33#, AZS-36#, and AZS-41#. the different models applicated in different parts of furnaces. AZS brick 33#, a normal refractory material, with the features of very good melting glass resisting, which seldom produces stone or other faults, and has little possibility to produce bubbles, widely used in glass Industrial furnace. AZS brick 36# has more free baddeleyite crystals in chain structure and less vitreous phase, which further improves the corrosion resistibility and reduces the potential defects in glass, so it is recommended to be used in sections where glass flow is faster and temperature is higher, such as melter sidewall, paving, doghouse, etc. AZS brick 41# has the most free baddeleyite crystals among the fused cast AZS families, which are evenly distgributed within the block. Its corrosion resistibility is the best and thus it is usually recommended to be used in the most demanding positions to balance the furnace life.
AZS brick use high purity zircon, alumina and silica as its raw material. Our fused AZS blocks mainly inclue model AZS-33#, AZS-36#, and AZS-41#. the different models applicated in different parts of furnaces. AZS brick 33#, a normal refractory material, with the features of very good melting glass resisting, which seldom produces stone or other faults, and has little possibility to produce bubbles, widely used in glass Industrial furnace. AZS brick 36# has more free baddeleyite crystals in chain structure and less vitreous phase, which further improves the corrosion resistibility and reduces the potential defects in glass, so it is recommended to be used in sections where glass flow is faster and temperature is higher, such as melter sidewall, paving, doghouse, etc. AZS brick 41# has the most free baddeleyite crystals among the fused cast AZS families, which are evenly distgributed within the block. Its corrosion resistibility is the best and thus it is usually recommended to be used in the most demanding positions to balance the furnace life.
High Alumina Bricks are produced with select bauxite chamotte as main raw material, fired at 1450-1470 �°C by advanced process with strict quality control. High Alumina bricks have great features like high temperature performance, great corrosion and wear resistance, high bulk density, low iron content, etc. High Alumina bricks are extensively used in mining, metallurgy, cement, and chemical, refinery and refractory industries. These bricks are used in all kinds of industrial furnaces and high temperature areas to prolong the lives of furnaces.
The Al2O3 content is more than 55%, and is calcined from a high-content alumina raw material such as a silicone raw material or a bauxite. High heat resistance and high temperature resistance at 1770 C and above. Has good slag resistance, mainly used in the masonry of steelmaking electric furnace, glass furnace, cement rotary furnace and so on. Characteristics of High Alumina Brick Price: 1.Refractoriness: More refractory than refractory clay bricks and semi-silica bricks, up to 1750-1790C, belonging to high-grade refractory materials. 2. Load softening temperature: Since the high aluminum has a high Al2O3 content, a low impurity content, and a low formation of the molten glass body, the fire-resistant softening temperature is higher than that of the refractory clay brick. However, since the mullite crystal has not yet formed a network structure, the load softening temperature is lower than the load softening temperature of the silica brick. 3. Slag resistance: High Al2O3 has high Al2O3 content, close to neutral refractory material, and can resist the erosion of acid slag and alkali slag. Because it contains SiO2, the resistance to alkali slag is less than acid resistance.
Magnesia-chrome brick is a high-level refractory product material ,which contains MgO and Cr2O3 as the main components, periclase and spinel are the main mineral components. This type of brick has high refractoriness, high temperature strength, strong resistance to alkaline slag, excellent thermal stability, and certain adaptability to acidic slag. The main raw materials for the manufacture of magnesia chrome bricks are sintered magnesia and chromite. The purity of the magnesia raw material should be as high as possible.
Features 1.High refractoriness 2.Good abrasion and creep resistance 3.High density Applications It is mainly used in areas that require high abrasion and temperature resistance, such as gliding rail bricks in steel pusher metallurgical furnaces, the tapping platform (tapping spout) style walking beam furnaces, and also as the interior for destructors.
We would like to introduce ourself as one of the leading supplier of Fly ash bricks. They are eco-friendly bricks which are made using fly ash or pulverized fuel ash. They are also called pulverised fuel ash lime bricks. They are 100% solid and they do not have any cavity unlike Hollow Concrete Blocks.Due to their strength and durability, fly ash bricks are used in various types of construction for both load bearing and non-load bearing walls. They are also used for other purposes such as, a. Raising Infrastructures b. Factories c. Warehouse d. Power plant e. High rise structures etc. f. Construction of pavements g. Tanks, under water works h. Canal lining i. Irrigation work
Refractory FireBricks, Monolithic (Refractory Castable), Refractory Mortar, Refractory Cement, Bed Materials, Bauxite, Fireclay, Insulation Bricks and Blanket
Refractory products made of silicon carbide as the main raw material. The content of silicon carbide is 72% to 99%. Generally select black silicon carbide (SiC content more than 96%) as raw material, add binder (or no binder), through batching, mixing, molding and firing and other processes. Silicon carbide brick has high thermal conductivity, good wear resistance, thermal shock resistance and corrosion resistance. So carbonization. Silicon bricks are widely used in industry. It can be used for metallurgical steel tube lining, nozzle, plug head, blast furnace bottom and hearth, heating furnace without water-cooled slide rail, non-ferrous metal smelting distiller, distillation tower tray, electrolytic cell sidewall, smelting metal crucible; shed plate and flame insulation material of silicate industrial kiln; oil and gas generator and organic waste combustion furnace in chemical industry. Aluminum reduction cell lining for high-tech ceramic kiln furniture, molten aluminum conduit and ceramic kiln furniture, lower part of large and medium-sized blast furnace body, hearth and hearth, aluminum refining furnace lining, zinc distillation tank lining, etc.
Features: 1. High refractoriness. 2. Good spalling resistance and wear resistance. 3. Good corrosion resistance. 4. Good thermal shock resistance. 5. High mechanical strength. 6. High-temperature creep rate is low. 7. Good volume stability at high temperature.
The content of magnesium ramming material is above 84%, calcium oxide is controlled at 6%~8%, and ferric oxide is about 6%. Due to its high fire resistance, the service temperature reaches 1850~1950. With the use of superfine powder technology, make the material with high CaO magnesia and ultrafine iron oxide, can fully in the process of calcining synthetic reaction, generating distribution evenly throughout the material 2 calcium ferrite, and no obvious shrinkage phenomenon in the sintering process, ensuring the quality of the material of the sintering synthesis and improve the effect of the use of the material at the same time.After being sintered at 1600â?? for 3 hours, the compressive strength of the sample can reach 40~50MPa, which basically meets the compressive strength indexes required by nickel iron smelting.Therefore, after a certain temperature (not less than 1200â??), the material has high density, high compressive strength, good erosion resistance and volume stability. Magnesium ramming material is used in the bottom of the hot nickel iron furnace. Magnesium ramming material has good heat preservation and insulation property, which can reduce heat loss, improve furnace temperature, shorten smelting time and reduce smelting power consumption.The compactness of the forged furnace lining is good, which solves the local leakage phenomenon caused by the non-compactness of the formed magnesia brick masonry furnace lining. The use of magnesia ramming material to build the nickel-iron furnace has obviously improved the lining life cycle, reduced the consumption of refractory materials, and replaced the shaped materials with amorphous materials, which is over the water.
Brick walls are probably the most common building elements in the construction of a house. These walls form basic units for creating rooms that make up a house. The walls beside being space dividers are also structural elements that transfer the load of the roof to the ground. Brick walls are constructed on strip spread or raft foundations that support the walls. The walls are constructed using bricks and mortar. Our bricks are table moulded and of uniform shape and they are burnt in kilns. These bricks are used for important work of permanent nature. The surfaces and edges of the bricks are sharp, square, smooth and straight. These bricks are also identified by their uniform colour and a ringing sound when struck. These bricks do not chip and don’t have any cracks. Our bricks do not absorb water more than 1/6 of their weight. There is no salty residue when the bricks are dry. Features: 1. Perfect in size/shape, 2. Handmade Bricks 3. Red/Orange in colour, 4. Do not break when dropped from waist height, 5. Do not absorb more than 18 to 20% of their own weight if kept submerged for 1 hour under water 6. Suitable for precision work such as exposed Technical Specification Dimensions 222 mm x 101 mm x 76 mm Weight 2.5- 2.7 kg (approx.) Color Orange Water Absorption Mean- 8.6%
