Magnesite Bricks/blocks

Magnesia chrome brick is an alkaline refractory product, which is made of periclase and magnesia chrome spinel, and is fired at 1600~1800 °C in an oxidizing atmosphere. It can also be made into non-burned brick by chemical bonding agent such as water glass.
According to the raw materials and process characteristics of the products, it can be divided into silicate-bonded magnesia-chrome bricks, direct-bonded magnesia-chromium bricks, re-combined magnesia-chrome bricks, semi-recombined magnesia-chrome bricks, pre-reacted magnesia-chrome bricks Casting magnesia chrome bricks.

If You Are An Industrialist Than You May Know That It Is Very Important To Build It Up With Very Good Quality Of A Product Because One's The Product Used Cannot Be Replay Again And Again. Isn't It?

The Magnesite Brick Is One Of The Most Extensively Used Primary Refractory Bricks. Magnesite Bricks Are One Of The Most Needed Product In Chemical And Nonchemical Processes, Due To Its Properties Such As Chemical Corrosion Resistance, Flexibility, Thermal Conductivity And Coating Ability.

We Are Distributing Magnesite Brick Across The World As Our Goal Is To Give You The Excellent Quality In Moderate Cost. Depending On Your Requirement, We Will Provide You Our Services Not Only In India But Across The World.

We Would Glad To Help You Out To Choose Whatever Is Profitable For You.

Cupola Fire Bricks are special type of brick which are form of Refractory ceramic material. It is used for inner surface lining of Boiler, furnace, kiln, fireplaces & fireboxes.

Quality:
We offer various quality bricks are IS-6, IS-8, PI - 30% to 70% Alumina offering high temperature resistance of 1100 C to 1700 C

Sizes of Cupola Bricks:
Length 9 Inch & 11 Inch
Dia (Inch) 9D, 12D, 15D, 18D, 21D, 24D, 27D up to 56D

Hanger & shoulder Fire bricks are special type of brick which are form of Refractory ceramic material. It is used for Roof lining of Boiler, furnace, kiln, fireplaces & fireboxes.

Hanger & Shoulder Brick are used for Reheating furnace roof. There are three qualities of Hanger & shoulder brick as per their specification
40% Alumina Hanger & Shoulder Brick
50% Alumina Brick Hanger & Shoulder Brick
70% Alumina brick Hanger & Shoulder Brick

Insulation Bricks are used for hot face & back up insulation lining of Boiler, Reheating furnace, Blast furnace, reactor chamber, high temperature furnace etc.

Insulation Bricks are providing energy efficiency by minimising heat loss. They have feature of low density, high purity, low thermal conductivity, excellent thermal shock resistance.

Types of Insulation Bricks:
Cold Face Insulation Bricks
Hot Face Insulation Bricks
HFK Insulation Bricks
Porosint Insulation Bricks

Sizes: Standard 9 * 4.5 * 3 Inch

Acid Resistance bricks & Tile are special form of masonry bricks which are chemically resistant and thermally durable. These are used for masonry construction and flooring which is prone to chemical attack.

These products are classified as per the different standard.
Class - I
Class - II

Sizes of Bricks:
230 x 115 x 75 mm, 230 x 115 x 65 mm, 230 x 115 x 38 mm, 230 x 115 x 25 mm

Sizes of Tile:
230 x 115 x 20 mm / 15 mm / 12 mm
200 x 100 x 20 mm / 15 mm/ 12 mm
300 x 300 x 15 mm / 12mm

Magnesia Bricks Description
Magnesia Bricks are alkaline refractory materials. These products have over 90% magnesium oxide content and adopt periclase as the principal crystalline phase. Magnesia Bricks can be divided into two categories of Burnt Magnesia Bricks and Chemical Bonded Magnesite Brick. They have excellent performance of superior high temperature mechanical strength and volume stability. Magnesia Bricks can service in the high temperature of 1750.. They are ideal products for glass furnace application.

Magnesia Bricks Features:
It is a kind of alkaline refractory product with periclase as main phase magnesite-alumina spinel clinker as basic material. the product has such characteristics as good temperature vibration, good strength and volume stability in high temperature.

Magnesia Bricks Application

Basic open-hearth furnace for steelmaking

Electric furnace bottom and wall

Permanent lining of oxygen converter

Non-ferrous metal metallurgy furnace

Hyperthermia tunnel kiln

Lining of rotary cement kiln

Heating furnace bottom and wall

Regenerative chamber of glass furnace

Magnesia Bricks Properties

High Refractoriness

Good alkaline slag erosion resistance

High apparent initial softening temperature

Good thermal conductivity

High thermal expansion

Magnesia Bricks Manufacturing Process

Burnt Magnesia Bricks are manufactured with magnesite clinker as the raw material and fired in the high temperature of 1550~1600 after smashing, burdening, mulling and molding. High-purity products can be fired in the temperature that over 1750. Chemical bonded magnesite brick is produced with certain chemical bonding through mixing, molding and drying.

With the breakthrough of the suspension preheating and pre-decomposition technology in the cement industry and the increasing size of the equipment, the heat load of the kiln is significantly increased, the rotation speed is accelerated, the alkali corrosion is severe, and the lining life and equipment operation cycle are shortened, thus the requirements for refractory materials. More demanding.
Its performance advantages are mainly manifested in: 1. High refractoriness under load and excellent high temperature resistance; 2. High strength, abrasion resistance, and easy to peel off and erosion; 3. Low thermal conductivity and good heat insulation effect; 4. Strong flexibility and heat resistance Excellent seismic performance; 5, moderate density, reduce the cylinder load.

With the rapid development of the world automobile industry, the production process of automobile rearview mirrors has also made great progress, and then higher requirements have been placed on the performance and quality of the mold bricks.
The glass bending brick has the following characteristics: First, the change of the reheating line is low, because the glass bending brick is sintered at 1050 ° C, which ensures the long-term use of the glass bending brick at 800 ° C. The characteristics of the burning line change to zero and no deformation; Second, the structure is fine, the glass bending brick is formed by micron material mixing by high-speed agitator, and the coarsest material particles in the batch are less than 1000 mesh, sectional structure Very fine; Third, the thermal shock stability is good, the glass hot bending mold brick will not appear any cracks (including cracking phenomenon) during long-term use; Fourth, the processing is convenient, the glass hot bending mold brick is according to user requirements specifications Made, this avoids the problem of large cutting and waste; fifth, the price is low, the price of glass bending bricks is lower than that of similar products.
Glass hot bending mold bricks can also be used in industries such as hot bending glass, hot melt glass and process glass.