Cement.
Construction materials (cement, kilnker, metals), food products and food raw materials (powder milk, sunflower oil, corn oil).
Distemper, Vinyle, Emulsion, Plastic Emulsion, Exterior, Wall Putty, Pioneer In Texture Paints In Pakistan, Thinner, Primers, Enamels, Matt Enamels.
Is the solvent for lacquer materials as per GOST 3134-78. It is used for solution of oily paints, varnishes and enamels. It is clear unclouded liquid. Viscosity du is not more than 0,795 g/m. Boiling range: start of boiling not more than 1600C, end of boiling not more than 2050C. Closed flash point is not less than +330C. Aromatic hydrocarbon content not more than 16%. Sulphur content not more than 0,025%.
Hdpe/ldpe t shirt bags (with or without logos), die cut bags (with or without logos), patch handle bags (with or without logos), side and bottom seals and shrink film (shrink wrap)..
Pakistan IRRI-6 rice is exported through out the world. we export this product under the fix specs as below: Moisture: 14% less Broken: 5% broken Foreign Matter: Nil Packaging can be provided in 5, 10, 20, 25 and 50kg with PP laminated on Buyers design. Minimum of Quantity: 1 x 20 FCL (24 Metric Tons) T.H.C (Terminal Handling Charges) to be on buyers account against FOB purchases.
Black truffles, white truffles.Export
fresh black truffle tuber uncinatum
Wood from Russia and Ukraine (pine, oak, ash, maple, birch, lime, acacia, hornbeam, white wood and etc).
Vegetable seeds, garlic and garlic powder, fruits, carrot.
Quick details: Place of origin: Baku,Azerbaijan Material: HDPE Thickness: 1.25-7.5mm Item: Single-Layer Corrugated Pipes Protection Rating: IP65 Structure: Bellows inside and outside Certification: ISO9001 Color: Outer wall: red (electricity), blue (telecommunication), black (others). Inner wall: white, yellow Standard: OHSAS 18001 Specification: AD7.0MM-AD106.0MM OD: 7.0-106.0mm Length: As your requirement Type: Flexible and Durable Packaging & delivery: Depends on your order. Description: Our polymeric product factory produces new type of single-layer corrugated polyethylene pipes with hard surface and light weight. These pipes ensure safety of power and telecommunication lines. Single layer corrugated pipes outside have a profile in forms of corrugations. Their inside is tubular hollow channels. The corrugated surface to withstand heavy loads. Single layer corrugated pipes varies with their wall thickness and diametres. The more is the thickness, more durable the pipes are. Higher thickness ones used for installation of pipes under the pouring of concrete, cement screed, or under the ground. Single layer corrugated pipes light series are used in all other cases or during outer installations. Our single layer corrugated pipes are made from HDPE material. Advantages and properties: - They do not rot and corrosion; - Resistant to chemicals; - Resistant to external loads and shock resistance; - Waterproof and resistant to moisture; - Non-conductive, so they eliminate the risk of electric shock if cable damaged; - They provide protection against mechanical damage; - Long life of at least 50 years; - They retain their characteristics and properties during the entire lifetime; - They have a wide operating temperature range; - They can be laid open and a closed manner; - These types of cables are flexible and do not need additional coupling fittings; - These types of cables equipped with broaching, which simplifies and accelerates the installation of wires and cables; - For the installation they do not require special skills and special equipment; - They are lightweight, easy to carry, for loading/unloading, handling and storage; have a low cost; - They have environmentally friendly and safe material. Material HDPE Application Areas: 1.Protection of high and low-voltage conductors from mechanical impacts 2.Protects environment from aggressive impacts when cabling under ground 3.Concealed mounting inside of concrete and installation 4.Sewage, ground and storm water disposal Working temperature: From -40ºC till+90ºC Color: Outer wall: red (electricity), blue (telecommunication), black (others). Inner wall: white, yellow Pipe wall color can be changed with the consent of consumer.
Purpose: According to GOST 24211-91 ?«Additives for concrete?» softener is applied to regulation plasticity of concrete and concern I groups of a class. Action: Plasticity mark P1 up to P5 increases sdditives of softener. After 28 days of drying hardness raises on 30-60% and norms of charge of cement on 1 m3 is reduced on 60-100 kg thus it intended for improvement of otheres building ??“ technical qualities of concrete. Quality parameters are resulted below: Color – colorless Density – 1,16 gr/m3 pH – 8-9 In the additive there is no chlorine.Norms of the charge calculated on the dry rest weight of cement of 0,4-1,0%. Guarantee: Guarantee for 6 month. Packaging on metal and plastic drums, transported in 250 kg metal containers.
High-quality gloss paint. It possesses excellent decorative and protective features. It is produced in different colours. Solvent: White s pirit. Expenditure: 130-150g per 1m. Drying time: 24 hours at 18-220C
Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is malleable at 100 to 150C. It is a reasonable conductor of electricity, and burns in air at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc on to iron or steel is known as galvanizing and helps to protect the iron from corrosion. Zinc Ash - Zn min. 62% Packing: 1MT Jumbo bags or loose into container Inspection: 3rd party at loading (SGS/ CCIC) Please contact for more info.
Is alkyd varnish based enamel and provides durable coating, possesses excellent features. It is used for internal and external application. It is prepared as gloss and matt enamels, and flooring enamel. Solvent: White spirit. Expenditure: 130-150g per 1m2. Drying time: 24 hours at 18-220C
For external and internal painting works. It is designed for painting of buildings and facilities and for interior painting, is weather-resistant, water-resistant, wear-proof and ecologically clean. White coloured, coloured into different shades as per client’s requirements. Solvent: water. Expenditure: 1kg per 2-3 m2.
Imber is the most widely used ecologically clean material. It is designed for decorative finish. Clear Varnish with preservative is used for pest control, protection from mould and atmospheric impacts. Varnish is used for painting of furniture, wooden items, improves their appearance, adds brightness, prolongs service life. Solvent: white-spirit. Expenditure: 100-150 g per m2. Drying time: 24 hours at 200C.
High quality alkyd based ready-to-use priming used for coating of surfaces with further enamelling. It is used to ensure firm and reliable connection of painted surface and lacquer materials. It is effective anticorrosion protection. It is produced in white, grey, red-brown colours. Solvent: Xylain. Expenditure: 100-150 per 1m2 in single layer. Drying time: 24 hours at 200C
Quick details: Place of Origin: Baku,Azerbaijan Specification: Depends on your requirement Size: Depends on your requirement Model Number: HDPE Thickness: Depends on your requirement Color: Black,White Material: PE Standard: OHSAS 18 001 Types: Tee Reducing Cross T 90 dgr., Tee Reducing T-Joints 90 dgr. Packaging & delivery: Depends on your order. Description: Thermoformed fittings for PE 100 pipes.
Application: used in production of lacquer materials designed for improvement of colouring agent wet-out and dispersion, increase of sedimentation stability of pigment suspension for 20-30%, reduction of light organic pigment flotation, dispersion time reduction for 30-50%. Due to surface activity and complete compatibility with different organic solvents, copper naphthenate is adsorbed on pigments, decreases discharge of main desiccants for 25-30% at the same time possesses activity synergism with Co and Mn, increases enamel coating firmness and reduces drying time to level 3. Trade dress: calcium naphthenate as a solution in white spirit. Appearance: unclouded homogenous light yellow liquid.
