Origin:egypt,mexico,indonesia all Fe Buyer sends Letter of Intent LOI; Seller issued FCO in favor of the buyer; Buyer issued ICPO with soft probe permission according Seller conditions written in FCO; Seller verifies Buyer ICPO through Seller Bank and sends NCNDA and IMFPA. Buyer signs and seals NCNDA and IMFPA and return to Seller; Seller would release draft contract to Buyer. Contract negotiation begins over emails between Buyer and Seller; Final draft contract sign electronically by both sides - Buyer and Seller; Mine site visit would be arrange within 1-2 days after the final contract is signed and sealed if requested by the end buyer; Within seven (7) banking days the Buyers bank sends the non-operative, non- transferable Documentary Letter of Credit;
Quick details: Place of origin: Baku,Azerbaijan Material: HDPE Thickness: 1.8-4.9 mm Item: Sewage polypropylene pipes PPH Rating: IP65 Certification: ISO9001 Color: White Standard: OHSAS 18001 Specification: As your requirement OD: 50-200 mm Length: 250-3000 mm Packaging & delivery: Depends on your order. Description: Pipes made of PPH “homogeneous polypropylene” are used for the construction of internal sewer network. High physical-mechanical properties make these Pipes resistant to corrosive environment. These properties can be applied both to internal as well as external surfaces of sewage Pipes. As distinct from PVC Pipes, they have high impact resistance.Our offers Pipes made of PPH for waste piping, which can be applied in construction of buildings, including residential houses, cottages, offices, hospitals, laboratories, industrial establishments, as well as farming industry.Taking into consideration biological neutrality of material, Pipes can also, be used in food manufacturing industry. Sewage Pipes and their socket details are made of high quality white or gray colored granulated propylene. Process of production is carried out in accordance with the requirements of ISO 9001:2000. Technical characteristics Polypropylene sewage Pipes are 15 – 20 times lighter than similar cast iron Pipes. They are resistant to impact of detergent agents and also, there is no need to paint the Pipes. Availability of socket helps to connect them easily. Warranty period is over 50 years. • Resistance to hot water flows at +95°C temperature(in some cases even up up to +100°C) • Resistance to chemicals, agricultural and industrial waste water containing various types of corrosive materials and substances • Resistance to hydraulic friction • Leak connections by sealing rubber rings • Ease of pipes and fittings facilitates transportation and installation work. • As opposed to metal and PVC pipes, PPR pipes during water flow absorbs sound and vibration • Condensate does not occur due to the low thermal conductivity on the outer surface of pipe
Grey Iron Casted Parts According To Your Technical Specs, Please Contact For Detailed Information
Pig Iron Casted Parts, We Are Able To Cast Parts ACCording Your Technical Specs, Please Contact For Details
Wholesale of Her Cur Stainless Nerj Pipes and Profiles
Quick details: Place of origin: Baku,Azerbaijan Material: HDPE Item: Winding Pipes Structure: Bellows inside and outside Certification: ISO9001 Color: black (inside yellow) Standard: OHSAS 18001 Specification: As your requirement OD: 800-3500 mm Length: 1-6 meters ( in specific order 12-18 meter) Packaging & delivery: Depends on your order. Description: Winding pipes of large diameter,high and low pressure.Standart length of this pipes: L= 6 meters.This length makes easy to package them in a raw,storage and transporting.Possibility: 1-6 meters for special targets.Some situation needs pipes with length,larger than standart,and less number of joints,so we could offer pipes of 2-3 sections with length 12 and 18 meters. Nominal diameter of the pipe corresponds to its inner diameter. Applied wall construction leads to the simplicity and strength of the pipe ring. Compared with other pipes, they dare less weight and wall structure of these pipes allows a higher tolerance to static loads. Structural rigidity depends on the type of profile. Profiles type PR: This type has a smooth inner and a ribbed outer surface. Low weight can be obtained a high hoop strength. Profiles type OP: This profile type also has a smooth inner and a ribbed outer surface. The external profile has the shape of "Olympic rings". It is also light weight and high strength ring.
Quick details: Place of origin: Baku,Azerbaijan Material: HDPE Thickness: 1.25-7.5mm Item: Single-Layer Corrugated Pipes Protection Rating: IP65 Structure: Bellows inside and outside Certification: ISO9001 Color: Outer wall: red (electricity), blue (telecommunication), black (others). Inner wall: white, yellow Standard: OHSAS 18001 Specification: AD7.0MM-AD106.0MM OD: 7.0-106.0mm Length: As your requirement Type: Flexible and Durable Packaging & delivery: Depends on your order. Description: Our polymeric product factory produces new type of single-layer corrugated polyethylene pipes with hard surface and light weight. These pipes ensure safety of power and telecommunication lines. Single layer corrugated pipes outside have a profile in forms of corrugations. Their inside is tubular hollow channels. The corrugated surface to withstand heavy loads. Single layer corrugated pipes varies with their wall thickness and diametres. The more is the thickness, more durable the pipes are. Higher thickness ones used for installation of pipes under the pouring of concrete, cement screed, or under the ground. Single layer corrugated pipes light series are used in all other cases or during outer installations. Our single layer corrugated pipes are made from HDPE material. Advantages and properties: - They do not rot and corrosion; - Resistant to chemicals; - Resistant to external loads and shock resistance; - Waterproof and resistant to moisture; - Non-conductive, so they eliminate the risk of electric shock if cable damaged; - They provide protection against mechanical damage; - Long life of at least 50 years; - They retain their characteristics and properties during the entire lifetime; - They have a wide operating temperature range; - They can be laid open and a closed manner; - These types of cables are flexible and do not need additional coupling fittings; - These types of cables equipped with broaching, which simplifies and accelerates the installation of wires and cables; - For the installation they do not require special skills and special equipment; - They are lightweight, easy to carry, for loading/unloading, handling and storage; have a low cost; - They have environmentally friendly and safe material. Material HDPE Application Areas: 1.Protection of high and low-voltage conductors from mechanical impacts 2.Protects environment from aggressive impacts when cabling under ground 3.Concealed mounting inside of concrete and installation 4.Sewage, ground and storm water disposal Working temperature: From -40ºC till+90ºC Color: Outer wall: red (electricity), blue (telecommunication), black (others). Inner wall: white, yellow Pipe wall color can be changed with the consent of consumer.
Quick details: Place of origin: Baku,Azerbaijan Material: HDPE Thickness: 1.8-70.5mm Item: PE 100 pipes Structure: Bellows inside and outside Certification: ISO9001 Color: black Standard: OHSAS 18001 Specification: As your requirement OD: 16-1200 mm Length: As your requirement Type: Flexible and Durable Packaging & delivery: Depends on your order. Description: Preparation of ?? 100-based polyethylene Pipes is considered as a beginning of a new phase in plastic Pipes production. These Pipes are considered more contemporary and characterized by high pressure resistance. As distinguished from other brands of Pipes (?? 63, ?? 80), these Pipes with less wall thickness have higher mechanical characteristics. Pipes ?? 100 are applied in the following areas: • Underground and surface drinkable and technical water pipeline network • Water drainage system • Field irrigation systems • Oil fields • Chemical and petrochemical industry • Construction of buildings and industrial facilities • Construction of main and local gas pipelines Advantages of PE100 Pipes: • Durability. ?? 100 Pipes obtain 50 years of minimal guarantee, this duration can be extended during operation. • High shock resistance, cracking resistance • High chemical resistance • Resistance to sunlight • Manufactured in standard sizes and in roll form • Smooth inner surface • Suitable for the usage in seismically active areas • Freeze resistance • Wide range of pressure Range of pipe sizes produced under normal pressure • DN - outer diameter of pipe, (mm) • s - pipe wall thickness, (mm) • SDR - Standard Dimension Ratio • M - Estimated weight (kg/m) 20 bar - SDR 9 DN: 16- 630 mm S: 2-70.3 mm M: 0.09-123 kg/m 16 bar - SDR 11 DN: 20-710 mm S: 2-64.5 mm M: 0.116-131 kg/m 12,5 bar - SDR 13,6 DN: 25-1000 mm S: 2-73.5 mm M: 0.148-214 kg/m 10 bar - SDR 17 DN: 32-1200 mm S: 2-71.1 mm M: 0.193-252 kg/m 9,5 bar - SDR 17,6 DN: 40-1200 mm S: 2.3-68 mm M: 0.281-242 kg/m 8 bar - SDR 21 DN: 40-1200 mm S: 2-57.2 mm M: 0.244-206 kg/m 6,3 bar - SDR 26 DN: 50-1200 mm S: 2-45.9 mm M: 0.308-167 kg/m 5 bar - SDR 33 DN: 63-1200 mm S: 2-36.7 mm M: 0.392-134 kg/m 4 bar - SDR 41 DN: 75-1200 mm S: 2-29.4 mm M: 0.469-108 kg/m
Quick details: Place of origin: baku, azerbaijan Material: hdpe Thickness: 0.9-1.2 mm Item: dip Certification: iso9001 Color: black Standard: ohsas 18001 Specification: as your requirement Od: 12-20 mm Length: 36-40 mm (length of drip component) Drip flow rate: 1.5-4.0 (liter/hour) Distance between drip components: 190-1050 Packaging & delivery: Depends on your order. Description: After cleaning the mixture from sand, clay, water and algae, etc. With the help of special filters, water is transferred in drops directly to the roots of plants through drop irrigation pipes. Drip irrigation pipes can be used in any landscape terrain. Applicaton of this system allows automation of overall irrigation system, which in its turn facilitates to reduce the use of work force. Contrary to surface irrigation method, drip irrigation increases the efficiency factor higher than 95%. Application of drop irrigation components has several positive aspects: • Enables the fertilizer to penetrate with water • Enables maximum equal distribution of water and nutrients • Allows irrigating large territories simultaneously in small portions • As the ground between plants is dry, it prevents the grow of weeds that helps to facilitate pest control. • High pressure is not required in drip irrigation that reduces operating expenses.
Quick details: Place of origin: baku, azerbaijan Material: hdpe Thickness: 1.9-15 mm Item: polypropylene ppr pipesprotection rating: ip65 Certification: iso9001 Color: white Standard: ohsas 18001 Specification: as your requirement Od: 20-90.0 mm Type: pn-10, 16, 20 Length: as your requirement Packaging & delivery: Depends on your order. Description: Advantages of pipes: • Quality: raw materials used in our factory are mostly produced in europe and correspond the requirements of din, tse, iso 9001 standards. • Reliability: systems assembled from these pipes have high temperature and pressure resistance. • Pipes service life: garantee of these pipes is 50 years and it can be changed depending on used temperature. • Corrosion and chemical resistance: pipes are corrosion and aggressive environment resistant. • Flow rate: due to the smooth inner surface these pipes has increased flow rates • Ecological cleanness: operation polypropylene does not enter into the reaction with water, thereby does not add foreign flavor to water. Its inner surface is lubricous, therefore, formation of bacteria, organic and non-organic sludge is not observed.
Quick details: Place of Origin: Baku,Azerbaijan Specification: Depends on your requirement Size: Depends on your requirement Model Number: HDPE Thickness: Depends on your requirement Color: Black,White Material: PE Standard: OHSAS 18 001 Packaging & delivery: Depends on your order. Description: Until recently in the construction of sewage wells used only concrete and iron structure. However, it is much better to use plastic manholes. Plastic wells used in the networks of household, storm sewage and lubricant. Plastic wells are also used for arranging industrial technological channels. Wells provide access to drains, shut-off and control valves and measurement technology. In addition, they can be used as drainage, rain receivers and inspection chambers. Plastic wells nesomnitelnymi have the following advantages compared to other types of wells (concrete, cast iron, brick) • a small proportion (compared with concrete) • easy installation, transportation and storage • easy maintenance • long service lines and trouble-free operation • high impact resistance material • connection leaks • resistance to mechanical damage, corrosion resistance • ductility of the material, its resistance to low temperatures, abrasion, UV radiation. • resistance to aggressive chemical environments • blocking leakage of sewage into the soil • high strength of the well shaft • lack of height restrictions • complete sealing of all joints and penetrations • Products are not afraid of frost and mechanical loads. Offered by our company options polyethylene manholes are used for a variety of purposes sama, subdivided into: • Inspection • Stormwater • Drainage • For measuring devices and valves • In order to establish the electrical, instrumentation and automation Also polymer wells divided by functionality: Sight - allowing to carry out maintenance work, which are used in floatable, household and storm water channels. Heavy - intended to collect rainwater, often with sand trap. Perepadnaya - allowing you to connect a channel on a mark above the bottom of the tray portion of the well. Cable plastic well to order - for laying the cabling in the electrical connection. Distribution of plastic wells - sharing household and sewer racks for several tanks settling.
Quick details: Place of Origin: Baku,Azerbaijan Specification: Depends on your requirement Size: 78*78-325*380 O.D: 50-100 mm Model Number: HDPE Thickness: Depends on your requirement Color: White Material: PE Standard: OHSAS 18 001 Types: Clamps,Elbows 45°,Elbows 90°,Couplings, Reducing couplings,T-Joints 45°,T-Joints 90°,Cross T 45°. Packaging & delivery: Depends on your order. Description: Installation of pipes to the interval sewer network uses from PPH “Homogen polypropylene” fitings .High physical-mechanical properties make these fittings resistant to corrosive environment. These properties can be applied both to internal as well as external surfaces of sewage Fittings. As distinct from PVC Fittings, they have high impact resistance. Our offers fittings made of PPH for waste piping, which can be applied in construction of buildings, including residential houses, cottages, offices, hospitals, laboratories, industrial establishments, as well as farming industry. Taking into consideration biological neutrality of material, fittings can also, be used in food manufacturing industry. Sewage fittings and their socket details are made of high quality white or gray colored granulated propylene. Process of production is carried out in accordance with the requirements of ISO 9001:2000. Technical parameters: Polypropylene sewage fittings are 15 – 20 times lighter than similar cast iron fittings. They are resistant to impact of detergent agents and also, there is no need to paint the fittings. Availability of socket helps to connect them easily. Warranty period is over 50 years • Resistance to hot water flows at +95°C temperature(in some cases even up up to +100°C) • Resistance to chemicals, agricultural and industrial waste water containing various types of corrosive materials and substances • Resistance to hydraulic friction • Leak connections by sealing rubber rings • Ease of pipes and fittings facilitates transportation and installation work. • As opposed to metal and PVC pipes, PPR pipes during water flow absorbs sound and vibration • Condensate does not occur due to the low thermal conductivity on the outer surface of pipe
Quick details: Place of Origin: Baku,Azerbaijan Specification: Depends on your requirement Size: Depends on your requirement Model Number: HDPE Thickness: Depends on your requirement Color: Black,White Material: PE Standard: OHSAS 18 001 Types: Tee Reducing Cross T 90 dgr., Tee Reducing T-Joints 90 dgr. Packaging & delivery: Depends on your order. Description: Thermoformed fittings for PE 100 pipes.
Quick details: Place of Origin: Baku,Azerbaijan Specification: Depends on your requirement Size: Depends on your requirement Model Number: HDPE Thickness: Depends on your requirement Color: Black Material: PE Standard: OHSAS 18 001 Types: Elbows 30-45-60-90 dgr.,T-Joints 90 dgr.,Cross T,Y Pieces 45-60 dgr. Packaging & delivery: Depends on your order. Description: PE 100 brand welded polyethylene fittings are adaptor fittings for PE100 high-density polyethylene pipes. These fittings are manufactured by connecting pipe sections by welding. Released PE 100 brand welded polyethylene fittings have the following configurations and types: 15°, 30°, 45°, 60° and 90°. These fittings are designed for pipe connections at the areas, where pipeline directions (turns and branches) and diameter change. PE 100 brand welded polyethylene fittings are connected to pipes by exactly lining-up and welding ends with the help of a special welding set. PE 100 brand welded polyethylene fittings have increased chemical resistance, temperature changes and deformations. These fittings are not subjected to oxidation, and do not decompose for a long time. Operating life of these PE 100 brand welded polyethylene fittings is 50 years which ensures long-term, continuous use of your pipes.
Quick details: Place of origin: baku, azerbaijan Item: seat Material: pe Applilcation: university, stadium, arena, school, etc. Color: optional colors or specify by clients Installation: simple mounting Packaging & delivery: Depends on your order. Description: Polymer products plant produces high-quality seat stadium, as well as for all other outdoor and indoor sports and concert facilities. Plastic seat has an ergonomic and attractive design, easy to install and maintain. Plastic seats for the stadium are mounted on any surface by fixing in 4 points. Products provided with clear and detailed instructions for assembly and use, in addition, the company's specialists are always ready to carry out installation and supervision of installation work on the installation of plastic seats anywhere in the country, and if necessary, in countries near and far abroad.
Quick details: Place of origin: baku, azerbaijan Material: hdpe Thickness: 2.7-12.5 mm Item: three-layer fiber glass pprc Rating: ip65 Certification: iso9001 Color: white Standard: ohsas 18001 Specification: as your requirement Od: 16-75 mm Length: as your requirement Packaging & delivery: Depends on your order. Description: Pipes made of “random polypropylene” are widely used in modern life. Being light and very durable, this thermoplastic is resistant to solvents, acids and alkali. Pipes made of this material are used at temperatures from -40°? to +95°?. Elasticity of pipe prevents crack formation, when water is frozen inside. We use high quality polypropylene from known manufacturers, such as sabic etc.In the production of fiber pipes.These pipes are produced in the equipments of well-known german companies. We offer to our customers high quality pipes with reasonable prices. Advantages of pipes: • Quality: raw materials used in our factory are mostly produced in europe and correspond the requirements of din, tse, iso 9001 standards. • Reliability: systems assembled from these pipes have high temperature and pressure resistance. • Pipes service life: garantee of these pipes is 50 years and it can be changed depending on used temperature. • Corrosion and chemical resistance: pipes are corrosion and aggressive environment resistant. • Flow rate: due to the smooth inner surface these pipes has increased flow rates • Ecological cleanness: operation polypropylene does not enter into the reaction with water, thereby does not add foreign flavor to water. Its inner surface is lubricous, therefore, formation of bacteria, organic and non-organic sludge is not observed. • Durability: middle layer of high temperature linear expansion of fiberglass prevents pipe bending and significantly increases pressure resistance.
Quick details: Place of origin: baku, azerbaijan Specification: depends on your requirement Size: depends on your requirement Model number: hdpe Thickness: depends on your requirement Color: metallic Material: steel Standard: ohsas 18 001 Type: steel flange, steel cap (pn 10, pn 16 both of them) Packaging & delivery: Depends on your order. Description: Technical parameters: Steel flange: pn10 (20mm-160mm) Pn16 (20mm-1600mm) Steel cap: pn10 (20mm-1600mm) Pn16 (20mm-1600mm)
Quick details: Place of Origin: Baku,Azerbaijan Specification: Depends on your requirement Size: Depends on your requirement Model Number: HDPE Thickness: Depends on your requirement Color: Black,White Material: PE Standard: OHSAS 18 001 Types: Elbows 45,90 dgr., Tee T-Joints 90 dgr., Tee Reducing T-Joints 90 dgr., Pipe Caps, Reducing couplings, Flange Adaptor. Packaging & delivery: Depends on your order. Description: Cast fittings - pipe fittings are manufactured by molding of polyethylene (PE100) under pressure and temperature. Cast fittings are used in cases when you want to change the direction of tubing, tee off, or switch to a different diameter. A significant advantage of cast fittings is their relatively low cost associated with the ease of manufacture. Installation is carried out by butt welding, which reduces the financial costs because practically no consumables required at the same time relatively simple installation. Elbows, flange bushings, reducers, tees and caps, are used in gas and water pipes made of PE100 from 63 to 315 mm.
Stainless steel glass accessories like glass round clamp.
Steel plate, round bar, profile, steel pipe.Trader
