Drop Irrigation Pipes

Type - Other Watering & Irrigation
Model Number - IR161020-2
Material - Plastic
Diameter - 16 MM
Wall thickness - 1,0 MM
Flow rate - 2 lph
Packaging - 400 meter
Dripper spacing - 20 CM

Product Name: PVC-U Irrigation pipe

Product Introduce:
PVC-U Irrigation pipe Based on health grade PVC resin as the main raw material, Add quantitative stabilizer/ Lubricants/Filling agent/Toner, By plastic extruder extrusion molding and plastic injection molding machine injection molding, Through cooling and solidifying, finalize the design, testing, packaging process to produce a kind of pipe.

Product Features:
Fluid resistance is small.
High transmission efficiency.
Quality is light, easy installation and maintenance, reliable in performance.
High temperature resistance, good sealing performance, long service life.

Product Application:
Irrigation pipe used in urban and rural areas indoor and outdoor water supply, Farmland irrigation, Salt industry halide pipeline, Aquaculture water, Mine ventilation, Water supply and drainage, Landscape irrigation and others engineering.

Product Specification Size:
Nominal pressure: 0.2 MPa, 0.2 5MPa, 0.32 MPa, 0.4 MPa.
Nominal diameter : 75 mm, 90 mm, 110 mm, 125 mm, 140 mm, 160 mm, 180 mm,
200 mm , 250 mm, 280 mm, 315 mm.

The Quick Details of HDPE Pipes :
Place of OriginLuoyang ,China
Material:HDPE
Brand name:GUORUNXINCAI
Diameter Nominal:20-800mm
Wall Thickness:2.3-57.2mm
Pressure:0.6-1.6Mpa
Standard:GB/T 13663-2000

The product HDPE Pipes'diameter,length and other types of indexes can be based on clients' requirement.
HDPE Pipe/High Density Polyethylene for Irrigation
High-density polyethylene pipe(HDPE pipe) is made from high density polyethylene as the main raw material, adding asmall amount of antioxidants, Anti-UV absorbers and pigments.
Guorun HDPE pipe's main characteristics:
1. Long-life-span.
2. Good sanitary performance
3. Good corrosion resistance
4. Good crack growth resistance
5. Little coefficient of friction and low flow resistance
6. Excellent wear resistance
7. Good solderability
8. Fine flexibility and anti-scratch ability
9. Low cost
It can reduce the cost of project substantially

The Applications of HDPE Pipes:
Guorun HDPE pipe can be widely applied to below fields:
1. City and town water supply
2. To transport natural gas &coal gas
3. Food &chemical industry
4. To transport ore &mud
5. To replace cement pipe, cast iron pipe &steel pipe
6. Landscaping pipeline
Guorun HDPE pipe's outer diameter is from 20 mm to 800 mm, and its wall thickness is mainly from 2.3 mm to 57.2 mm .
Terms
Port:Qingdao/Lianyungang etc.
FOB Price:US $1 -18 /Meter
Minimum Order300 Meter/Meters 1container
Payment Terms:L/C,T/T,Wes

1. Compressure compensation function,stable flow rate.
2.Superior durability with raw material of chemical-proof and anti-ultraviolet rays
3. Cutting down production costs
4. Decreasing damage by from insects
5. Increasing productivity

Balaji Impex offers a premium range of PVC Pipes & Fittings, designed for durability, high performance, and leak-proof connections. Made from high-quality PVC material, they are corrosion-resistant, lightweight, and easy to install. Ideal for plumbing, drainage, and irrigation systems, our pipes and fittings ensure efficient water flow and long-lasting reliability for residential, commercial, and industrial applications.

Spinkle Irrigation Pipe 6m
The standard atmospheric pressure value is 5 atu. However, production can be made up to 25 atm. For other dimensions, please request information.

This product is made of polyethylene material made for high-density special pipe with increased resistance to sun rays (UV1) with special additives manufactured in accordance with TS 418 standards.

Sprinkler irrigation is the irrigation system in which water required by the plant is sprayed like rain under the defined pressure. Water is transferred to sprinklers. Individual sprinkler system consists of the water source, pump, main pipeline, vertical pipeline, and sprinklers.
Sanbor Sprinkler Irrigation Pipes which are produced according to TS EN 12201-2 quality standard is made of high-density polyethylene (HDPE) and produced with 50-160 mm diameters and 5-6 meter length. Operating pressure is 6 atmospheres. The montage of SANBOR Sprinkler Irrigation Pipes is easy. They can be combined when the plastic seals and the clips at two sides are combined.
Advantages
Since there is no water loss in the system, water is used in the maximum level in the places where irrigation water is low (3.5 lt/sec).
It can provide irrigation without erosion in slopped lands.
Since the water is given to the soil with the rain effect, 20%-50% increase is observed in corp yield compared to other irrigation methods and quality is high. -During seed germination, the inability of the plant to reach above ground due to the layer created on the soil is prevented.
Ideal irrigation system in the soils with low depth and (shallow) permeable soils.
At the places closer to the sea, salt particles left by the sea water carried by wind, dust and insects can be washed via rain.
Since there is the opportunity to control water via sprinkler irrigation, it is the best irrigation method at the places whose groundwater level (drainage) is high.
Since there is no need for field ditches, planting area increases and agricultural works can easily be operated.
Vegetables, citrus, vineyards and other orchards can be protected from frost and heat.
Dissoluble fertilizers can be applied to vegetables with the irrigation water without extra work
Areas of Usage
It is used in the irrigation of slopped lands, wine yards, and gardens, vegetable, citrus and other orchards.
Things to take into account
While carrying, it should not be lifted and thrown. Clamps and clips can be broken.
It can stay under solar rays and be used in the fields during summer. No problem is observed.
Pipes should be stored at the possible temperatures between +5°C and +45°C.
Before using the seals for pipe connection, seal recesses should be cleaned. The seal should be completely placed.
High pressure created in motor pump outlets cause the removal of seals in the pipes. Pressure should be kept under control with a manometer. The promised pressure values on our pipes are under our warranty. In case of higher pressure levels than the indicated ones, the possible problems that can be created are not covered by the warranty