Model L136 Engine type 4 cycle, In line, direct- injection, water cooled, aspirated naturally Rating output (B.H.P) PS(kW)/rpm 160(118)/2200 Displacement( cc ) 8,071 Cylinder number - bore x stroke( mm ) 6 - 111 x 139 Mean piston speed (m/sec. ) 10.19 Compression ratio 17.6 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 32 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 4.5 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 100 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 25 / 23 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT90AF (Dong-I) Gear ratio 1.61 2.06 2.45 2.82 3.12 3.46 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,266 x 875 x 937 with M. gear mm 1,542 x 875 x 963 Engine dry weight without M/G kg 743 with M. gear kg 928
Technical specifications Configuration 4-cycle, vertical, water cooled diesel engine Number of cylinders 3 Bore and stroke mm (in.) 82 x 70 (3.23 x 2.76) Displacement cc (cu. in.) 1019 (68) Maximum output hp(kW)/rpm at crankshaft 40hp/4500rpm (29.41kW/4500rpm) Combustion system Direct injection Starting system Electric with emergency rope start Cooling system Direct seawater cooling by rubber impeller pump Lubrication system Forced lubrication with trochoid pump Generator AC dynamo built in flywheel Drive device Clutch type Dog type clutch Reduction ratio Ahead/Astern 1.846/1.846 Direction of rotation Clockwise viewed from propeller Lubrication system Oil bath Tilt up system AX-E manual AX-EP hydraulic Control device Engine speed control Remote control Clutch control Remote control Steering Remote control Transom installation Through bolts with nuts Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1) Fuel oil capacity l(cu.in) 24 (1465)
Technical specifications Configuration 4-cycle, vertical, water cooled diesel engine Number of cylinders 3 Bore and stroke mm (in.) 82 x 70 (3.23 x 2.76) Displacement cc (cu. in.) 1019 (68) Maximum output hp(kW)/rpm at crankshaft 36hp/4500rpm (26.5kW/4500rpm) Combustion system Direct injection Starting system Electric with emergency rope start Cooling system Direct seawater cooling by rubber impeller pump Lubrication system Forced lubrication with trochoid pump Generator AC dynamo built in flywheel Drive device Clutch type Dog type clutch Reduction ratio Ahead/Astern 1.846/1.846 Direction of rotation Clockwise viewed from propeller Lubrication system Oil bath Tilt up system AX-E manual AX-EP hydraulic Control device Engine speed control Remote control Clutch control Remote control Steering Remote control Transom installation Through bolts with nuts Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1) Fuel oil capacity l(cu.in) 24 (1465)
Technical specifications Configuration 4-cycle, vertical, water cooled diesel engine Number of cylinders 3 Bore and stroke mm (in.) 70 x 70 (2.76 x 2.76) Displacement cc (cu. in.) 808 (49) Maximum output hp(kW)/rpm at crankshaft 27hp/4500rpm (19.9kW/4500rpm) Combustion system Direct injection Starting system Electric with emergency rope start Cooling system Direct seawater cooling by rubber impeller pump Lubrication system Forced lubrication with trochoid pump Generator AC dynamo built in flywheel Drive device Clutch type Dog type clutch Reduction ratio Ahead/Astern 1.846/1.846 Direction of rotation Clockwise viewed from propeller Lubrication system Oil bath Tilt up system AX-E manual AX-EP hydraulic Control device Engine speed control Remote control Clutch control Remote control Steering Remote control Transom installation Through bolts with nuts Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1) Fuel oil capacity l(cu.in) 24 (1465)
Technical specifications Configuration 4-cycle, vertical, water cooled diesel engine Number of cylinders 2 Bore and stroke mm (in.) 70 x 70 (2.76 x 2.76) Displacement cc (cu. in.) 539 (33) Maximum output hp(kW)/rpm at crankshaft 18hp/4500rpm (13.2kW/4500rpm) Combustion system Direct injection Starting system Electric with emergency rope start Cooling system Direct seawater cooling by rubber impeller pump Lubrication system Forced lubrication with trochoid pump Generator AC dynamo built in flywheel Drive device Clutch type Dog type clutch Reduction ratio Ahead/Astern 1.846/1.846 Direction of rotation Clockwise viewed from propeller Lubrication system Oil bath Tilt up system AX-E manual AX-EP hydraulic Control device Engine speed control Remote control Clutch control Remote control Steering Remote control Transom installation Through bolts with nuts Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1) Fuel oil capacity l(cu.in) 24 (1465)
Rated Output 55.2 kW / 75 mhp Rated Speed 3200 rpm Displacement 1.995 L / 121.7 cu. in No. of cylinders 4 cylinders Cylinder Bore x Stroke 84 mm x 90 mm / 3.31 in x 3.54 in Combustion system Direct Injection, Bosch Distributor Type VE Pump Aspiration Turbocharged Alternator 12V - 125A Dry weight without gear 207 kg / 456 lbs Dimensions 903 mm x 661 mm x 659 mm Controls Mechanical Certifications RCD 1 EPA Tier 2 BSO II EMC SOLAS
RATED OUTPUT 478 kW / 650 mhp RATED SPEED 2150 DISPLACEMENT 13.7 ltr [836 cu in] CYLINDERS 6 in-line BORE X STROKE 132.9 mm x 165 mm TYPE 4-stroke, vertical. water cooled diesel engine
RATED OUTPUT 298 kW / 405 mhp RATED SPEED 1950 DISPLACEMENT 13.1 ltr [799.4 cu in] CYLINDERS 6 in-line BORE X STROKE 130 mm x 165 mm TYPE 4-stroke, vertical. water cooled diesel engine
RATED OUTPUT 257 kW / 350 mhp RATED SPEED 1950 DISPLACEMENT 13.1 ltr [799.4 cu in] CYLINDERS 6 in-line BORE X STROKE 130 mm x 165 mm TYPE 4-stroke, vertical. water cooled diesel engine
Output: 3hp-12hp 1.Proven Launtop Technology 2.Proven economy and reliability 3.Compact and lightweight 4.Fast and easy all weather starting 5.Automatic low oil level cut out 6.Heavy duty air cleaners 7.Lower fuel consumption compared to LA engine Brand new production, factory direct sales, you deserve it
A&S Construction Machinery Co., Ltd. supplies all types of harnesses. All the brands of harnesses we can provide: CAT harnesses, KOMATSU harnesses, JOHN DEERE harnesses, SANY harnesses, XCMG harnesses, VOLVO harnesses, HITACHI harnesses, SUMITOMO harnesses, LIEBHERR harnesses, DOOSAN harnesses, CASE harnesses, BOBCAT harnesses, KUBOTA harnesses, YANMAR harnesses, HYUNDAI harnesses, DAEWOO harnesses, etc. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc. Contact Us A&S Construction Machinery Co., Ltd.
A&S Construction Machinery Co., Ltd. supplies all types of Connecting rods. All the brands of Connecting rods we can provide: CAT Connecting rods, KOMATSU Connecting rods, JOHN DEERE Connecting rods, SANY Connecting rods, XCMG Connecting rods, VOLVO Connecting rods, HITACHI Connecting rods, SUMITOMO Connecting rods, LIEBHERR Connecting rods, DOOSAN Connecting rods, CASE Connecting rods, BOBCAT Connecting rods, KUBOTA Connecting rods, YANMAR Connecting rods, HYUNDAI Connecting rods, DAEWOO Connecting rods, etc. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc.
A&S Construction Machinery Co., Ltd. supplies all types of drive motor carriers. All the brands of drive motor carriers we can provide: CAT drive motor carriers, KOMATSU drive motor carriers, JOHN DEERE drive motor carriers, SANY drive motor carriers, XCMG drive motor carriers, VOLVO drive motor carriers, HITACHI drive motor carriers, SUMITOMO drive motor carriers, LIEBHERR drive motor carriers, DOOSAN drive motor carriers, CASE drive motor carriers, BOBCAT drive motor carriers, KUBOTA drive motor carriers, YANMAR drive motor carriers, HYUNDAI drive motor carriers, DAEWOO drive motor carriers, etc. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc. Contact Us A&S Construction Machinery Co., Ltd.
A&S Construction Machinery Co., Ltd. supplies all types of Engines. All the brands of Engines we can provide: CAT Engines, KOMATSU Engines, JOHN DEERE Engines, SANY Engines, XCMG Engines, VOLVO Engines, HITACHI Engines, SUMITOMO Engines, LIEBHERR Engines, DOOSAN Engines, CASE Engines, BOBCAT Engines, KUBOTA Engines, YANMAR Engines, HYUNDAI Engines, DAEWOO Engines, etc. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc. Contact Us A&S Construction Machinery Co., Ltd.
(1) Diesel engine for generator use (2)Diesel engine for water pump use 2 Diesel engine spare parts (1)Diesel engine for generator use 代表å?¾ç??ï¼?495D Type Cyliner/Bore/Stroke Intake Method Combustion Type Rated Output/ Speed Min. Fuel Consumtion Net Weight (mm) (Kw/r/min) (g/kw.h) (kg) 495D 4/95/115 Natural Aspirated Turbo Method 26.5/1500 246 380 495D2 4/95/115 Natural Aspirated Turbo Method 30/1800 246 380 K4100D 4/100/115 Natural Aspirated Turbo Method 30.1/1500 246 380 K4100D2 4/100/115 Natural Aspirated Turbo Method 34/1500 246 380 K4100ZD 4/100/115 Turbocharged Turbo Method 42/1500 235 390 K4100ZD2 4/100/115 Turbocharged Turbo Method 45/1800 235 390 N4102D 4/102/120 Natural Aspirated Direct Inject 36/1500 235 380 N4102ZD 4/102/120 Turbocharged Direct Inject 48/1500 230 390
Cummins NT855 KT19 KT38 KT50 QSL QSB QSM, ISM Isbe 6CT 6BT Engines and Parts.
Copper cathode, copper wire scrap, sunflower oil, soybeans seeds, used rails, palm oil, urea 46% nitrogen granular, white corn, sisal fiber, cashew nut, sesame seed, hardwood charcoal, a4 paper icumsa 45 sugar, wood pellets, paper scrap, used engines, yamaha cardboard engines, pet bittle scrap, almond nuts, pistachio nuts, battery scrap, computer scrap, phone scrap, beef meat, goat meat, lamb meat, wet salted cow, cocoa, arabica coffee.
Diesel Engine Parts For Heavy Duty Engine And Tractor Engines As Well As Agricultural Engines.
Engine, braking components.
Diesel Engines
