Silicon Metal processed by excellent industrial silicon and including full varieties. Used in electro, metallurgy and chemical industry. It is silver gray or dark gray powder with metallic luster, which be of high melting point, good heat resistance, high resistivity and superior oxidation resistance, it's called "industrial glutamate", which is an essential basic raw material in hi-tech industry.
Silicon calcium is composed of the elements of silicon, calcium and iron, is an ideal compound deoxidizer, desulfurization agent. It is widely used in high quality steel, low carbon steel, stainless steel production and nickel base alloy, titanium alloy and other special alloy production. In cast iron production,the calcium silicon alloy have inoculation effect.helped to form fine grained or spheroidal graphite; in the grey cast iron Graphite distribution uniformity,reduce chilling tendency,and can increase silicon,desulfurization,improve the quality of cast iron.
The formation of foam in the industrial processes require strict control to prevent hindrances in the production process. Controlling the foam is one of the challenges in many industries like effluent treatment, chemical processing , distilleries, textiles , leather, cleaning products . Our defoamers and antifoams significantly reduces and effectively controls foam in industrial processes. For more than 3 decades we have been manufacturing and developing variety of defoamers and anti foaming agents under our brand names Tabonic and Tabosil. Our Silicone Defoamers of various concentrations can be used across general industrial processes and in effluent treatment plants.
We manufacture a range of high quality high performance non silicone based defoamers. These defoamers are used in various industrial processes such as Paper, Paints, Aqeuous systems, Adhesives, Textiles, etc.
Standard General Silicon 245 g 24psc inbox container 40f takes about 3280 box container 20f takes about 2200 box
High Normal General Silicon 280g X 24 Boxs container 40f takes about 3280 box container 20f takes about 2200 box
heater Silicon 320 g 24 psc x Boxs container 40f takes about 3280 box container 20f takes about 2200 box
Glass Silicon 320g 24 pec X box container 40f takes about 3280 box container 20f takes about 2200 box
container 40f takes about 3280 box container 20f takes about 2200 box
Usage: Used for silicification of blood collection tubes, which can make the surface of blood collection tubes smooth, make blood collection tube additives work better, reduce cell damage and prevent cells from hanging on the wall. Characteristics: 1. Desheng has its own professional R&D team, and technicians can answer any questions and do relevant research for water-soluble silicifying agent products, which is more professional; 2. Desheng is a direct manufacturer, Water-soluble silicifying agent products are in sufficient stock and can be shipped quickly; 3. Due to its unique composition, this product is silicified for test tubes. Under the action of additives, the cell samples will not change their original properties and can effectively obtain accurate detection results.
a. Name of product :Ferro Silicon Grade 75 b. Price of product: negotiable c. Product origin: Kuwait d. Key Specifications/Special Features e. Harmonization System (HS) Code : f. Minimum Order Size : 100mt g. Packaging details : in bags or bulk in containers
1. Silicon Metal 441 Si : 99.9%Min, Fe : 0.4 Max Al : 0.4 Max, Ca : 0.1 Max 2. Silicon Metal 553 Si : 99.85%Min, Fe : 0.5 Max Al : 0.5 Max, Ca : 0.3 Max 3. Silicon Metal 3303 Si : 99.2%Min, Fe : 0.3 Max Al : 0.3 Max, Ca : 0.3 Max 4. Silicon Metal 2202 Si : 99.3%Min, Fe : 0.2 Max Al : 0.2 Max, Ca : 0.2 Max
97 silicon Silcon Metal 553 Silcon Metal 551 Silcon Metal 441 Silcon Metal 421 Silcon Metal 3303 Silcon Metal 2202 * As per customer's request Size: 10-100mm, 90%min Packing: 1000kg net each bag
Features Thermal conductivity 3.0W/(m.K), flammability UL 94-V0 Excellent electrical insulation, bonding strength13 Mpa Application temperature: -45~123, Short term: 225 Fast cure with additional heat Applications EV Battery pack; Aerospace equipments; Semiconductor, LED TV; Between any heat source and a heat sink; XK-D30L is a two-part thermally conductive adhesive, combining features of thermally conductive, electrical insulation,semi-rigid bonding and sealing. It is ease of use, long service life, suitable for automated dispensing system to improve productivity and bonding effect. XK-D25 is designed for strong bonding of metals or plastics. Better effects can be achieved when it is used together with GLPOLY bonding adjuvants. Description GLPOLY Thermally Conductive Structural Adhesives Are Designed For CTP Battery Cell Bond. Ive sorted out the materials of new energy EV CTP battery pack and found that the items concerned most by engineers were thermally conductivity, tensile strength, shear bonding strength, hardness, elongation and shelf life etc,  in addition, the fluency of dispense and fluidity of material were concerned too. The design requirements of each customer are dissimilar, but it does not matter, GLPOLY is confident of providing customized service for customers. 1. Has no equals in features of bonding strength, roughness, thermally conductive and electrical insulation; 2. Bonding strength is 30% higher than that of competitive products, withstanding impact of 12m freefall superimposing speed of 120km/h ; 3. Eliminates the need of mechanical fasten, increasing volume by 20%, reducing components by 40%, improving productivity by 50%, competitive products cant achieve these objectives; 4. Withstands 2500V at 0.28mm thick; dielectric strength is up to 14kV/mm, 40% higher than competitive products; 5. Performance degradation is less than 5% at 85 Celsius degree, RH85 for 1000 hours, and performance of PU deceases by 40% for 500 hours; 6. 25-year service life, three times longer that that competitive products; 7. Flammability UL94 V-0, when it leaves fire, it goes out; some competitive products would be burned out; 8. Cures for 13 hours at room temperature, two times faster than that of competitive products; 9. Application temperature: -45~175, short term: 250, 15% higher than that of competitive products; GLPOLY thermally conductive structural adhesive is designed for CTP battery cell bond, providing 8MPa bonding strength, and compatible with automated dispense processes.
INTRODUCTION: The series is and tear strength, 2-part liquid silicone rubber suitable for injection molding processes. FEATURES: 1. High tensile strength 2. Good rebound property 3. Outstanding resistance to ageing 4. Low shrinkage 5. Low yellowing 6. Excellent thermal and cold stability PACKAGING: It is available in 20kg pails of 200kg drums TYPICAL PROPERTY: Appearance: Transparent; Viscosity (mpas): 650,000~950,000; Hardness: 20~70 Shore A; Tensile Strength: 6.5~8.5 MPa; Tear Strength: 20~35 KN/m; Elongation at break: 330%~800%; Linear shrinkage: 0.1% REMARK: The product should be closed tightly, protected from light and moisture, the shelf life is 12 months. These figures are for reference only, please contact us for detail. ABOUT US: We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber. What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.
KESARIA manufactures premium quality Silicone Bush For Taps to prevent leakage of water in Water Purifier Taps. These Silicone Bush are transparent, flexible, Odorless, withstand extreme temperature range, UV, Ozone, harsh chemicals, acids & alkalis, highly durable & avoid bacterial growth. Our Silicone Bush for taps are available in numerous colors & sizes, are easy to install & are broadly used in Water Purifiers.
Silicone Hoses
Brief information -- A quaternary modified softening agent with terpolymer structure and excellent hydrophilicity. -- HTcone 3206 E is very stable in acid and mild alkali condition at normal temperature while it also has excellent stability at 100degree below pH 8,which is suitable for dyeing machine and setting machine . -- Confers soft, silky and bulky hand feels to fabrics, as well as hydrophilicity while absorbency is 2 â?? 3 seconds. General properties -- Appearance: pale transparent liquid -- pH: 5 â?? 8 (1% solution at 20 degree) -- Ionicity: nonionic -- Solubility: easily soluble in water --Solid content : 53% Properties and fields of application -- Resistant to high temperature, mild alkali at normal temperature, strong electrolytes and shearing stable wihout silicone spots. -- Natural soft, smooth and non-greasy hand feels. -- Excellent hydrophilicity that exactly solves the conflict of hand feels, hydrophilicity and washing resistance. -- Suitable for various process and euqipments with high flexibility. -- Suitable for various fibres, such cotton, T/C, CVC, etc, especially best performance to cotton. -- Excellent hydrophilicity that allows direct shade repair and avoids re-pollution during the rapair. -- Better cost performance compared with softener flakes at same price, which achives performance combined softener flakes and hydrophilic silicone softeners. Application -- High concentration product and can be diluted 5-10 times. -- Padding: HT-3206E: 20 â?? 50 g/L Cure at 100degree and set at 150 â?? 180degree for 50 seconds -- Dipping: Ht-3206E: 2 â?? 5% (O.W.F) Temperature & time: 25 â?? 50degree �? 20 â?? 30 min -- Specific process should be adjusted by testing. Packing and storage -- Packing: 125 kg/polyethylene drum -- Storage: 6 months in sealed container at room temperature
This silicon carbide crucibles are used to produce sponge iron based on tunnel kilns. Main sponge iron market is India, Iran and Mexico.
Si: 70-75% Al: 1.25% max P: 0.5%max S: 0.05%max C: 0.2% max Packing: 40 Kgs Bag
