Heater Silicon 320 G

Silicon rubber heaters have wire-wound or etched foil heating elements protected by Fiberglass-reinforced silicon rubber vulcanized and compressed at high temperature and press. They are thin, bendable and shaped to fit almost any equipment. Heat can be applied to the Most complex shapes, geometries, curves and pipes conceivable without sacrificing efficiency or Dependability. Techical parameters: 1 maximum temperature resistance of insulatorú¦300íµ 2 maximum operation temperatureú¦ 250íµ 3 insulation resistanceú¦í²500 mª+/dc 1000v 4 breakdown voltageú¦í² ac1500v/5s 5 capacity toleranceú¦ía5% 6 temperature range: -60íµí¬250íµ continuous heating; heating element: available with either Etched foil or wire-wound elements: 7 dimension:maximum 1.2míßxm minimun 15mmíß15mm; thickness 1.5mmú¿thinnest 0.8mmú¼ Thickest 4.5mmlead wire length:standard 130mm. Installation: 1 with backing psa (pressure sensitive adhesive or called self adhesive, self stick adhesive) As 3m psa 2 with vulcanization or curing and compression at high temperature and press 3 with spring and hole or eyelet 4 with clamps Benefits: 1 heating evenly, accurate and adjustable 2 various shapes, holes, cutouts, profiled watt densities and multiple voltages 3 put heat exactly where it is required 4 high dielectric strength, flexibility, bendable and cost effectiveness. 5 resistance to temperature extremes, moisture, weathering, radiation, fungus and chemical Attack 6 heat can be applied to the most complex shapes, geometries, curves and pipes conceivable Without sacrificing efficiency or dependability. 7 easily bonded and/or mechanically mounted, even onto the curving surface.

Silicon rubber heaters have wire-wound or etched foil heating elements protected by Fiberglass-reinforced silicon rubber vulcanized and compressed at high temperature and press. They are thin, bendable and shaped to fit almost any equipment. Heat can be applied to the Most complex shapes, geometries, curves and pipes conceivable without sacrificing efficiency or Dependability. Techical parameters: 1 maximum temperature resistance of insulator¦300íµ 2 maximum operation temperature¦ 250íµ 3 insulation resistance¦í²500 mª+/dc 1000v 4 breakdown voltage¦í² ac1500v/5s 5 capacity tolerance¦ía5% 6 temperature range: -60íµí¬250íµ continuous heating; heating element: available with either Etched foil or wire-wound elements: 7 dimension:maximum 1.2míßxm minimun 15mmíß15mm; thickness 1.5mm¿thinnest 0.8mm¼ Thickest 4.5mmlead wire length:standard 130mm. Installation: 1 with backing psa (pressure sensitive adhesive or called self adhesive, self stick adhesive) As 3m psa 2 with vulcanization or curing and compression at high temperature and press 3 with spring and hole or eyelet 4 with clamps Benefits: 1 heating evenly, accurate and adjustable 2 various shapes, holes, cutouts, profiled watt densities and multiple voltages 3 put heat exactly where it is required 4 high dielectric strength, flexibility, bendable and cost effectiveness. 5 resistance to temperature extremes, moisture, weathering, radiation, fungus and chemical Attack

Supplier: Sic heating element,sic heater,silicon carbide heating element,mosi2 heating element,mosi2 heater,molybdenum disilicide heating element

1. Application of liquid silicon rubber for toe spreaders: The product is a two component high elongation silicone gel designed for silicone food care products, such as silicone insole.Q This product cured at room temperature to a soft track gel with the addition of curing agent. The soft nature and cushioning effect offer this product provides excellent protection for our food health care. 2. Aadvantages of liquid silicon rubber for toe spreaders: 1. High transparency.  2. High fluidity, high curing rate.  3. Pressure release.  4. Shock absorption.  5. Multiple density 3. Datasheet of liquid silicon rubber for toe spreaders: Model Q625# Q630# Appearance Transparent Transparent Mixing Ratio 1:1 1:1 Operating time (Mins 25¡ãC) 30 -50 30 -50 Curing time (H 25¡ãC) 3 - 5 3 - 5 Curing time (Mins 60¡ãC) 20 - 30 20 - 30 Hardness (A¡ã) 25¡¨¤2 30¡¨¤2 Density ( g/cm 3 ) 1.08 1.08 Viscosity (CS) (After mixed) 8000 ¡¨¤ 500 8500 ¡¨¤ 500 Tensile-strength( kgf /cm2 ) 45 ¡¨¤ 5 45 ¡¨¤ 5 Tear-strength (kgf /cm2 ) 14 ¡¨¤ 2 17 ¡¨¤ 2 Elongation-break(%) 450 ¡¨¤ 50 400 ¡¨¤ 50 Retractility(%) ¡¨¹0.1 ¡¨¹0.1        4. Package and storage of liquid silicon for  Toe Spreaders: 1). 20kg or 200kg /drum. 2). It is a kind of non-dangerous goods, and it should be stored at a cool and dry place, please keep it from sun and rain.     Place of Origin: Guangdong China Brand Name: Hong Ye silicone rubber Minimum Order Quantity: 200 Kilogram Delivery Time:  within 3 days after payment confirmed in our bank. Supply Ability: 8 Tons per Day  Payment Terms: L/C, T/T, Western Union Price Terms: FOB, EXW, CIF, CNF Packaging Detail: 1kg/Jar,5kgs/Jar,20kg/drum,25kgs/drum,200kgs/drum Further information for silicon  Toe Spreaders, please feel free to contact Miss COCO: Website: http://www.szrl.net Tel: +86 -0755-89948294 FAX: +86-0755-89948030 5kg/pail; 20kg/pail; 25kg/pail; 200kg/pail

1.Product Description YJS-720 two components platinum cured silicone with 1:1 mixing ratio by weight. It is soft food grade silicone,  with 20 Shore A hardness, which is suitable used for moulding chocolate & icing sugar, candy, cakes, fondant.   2.Features: A. Amazing fluidity and easy to operate A. Platinum-based, food-grade silicone (environmental friendly, odorless and non-toxic) B. Delicate design available C. Mixing ration: 1:1, easy to mix D. Easy de-molding E. Excellent tension and tear strength F. High performance in duplication G. Shrinkage is almost zero (below 0.1) H. Excellent resistance to weather, temperature, aging, acid and aging-proofing. I. High resistance to high temperature and aging(resist -60 to 250) J. Food safe 3.Technical Data Typical general characteristics Inspection Method Value Product data (Catalyzed A+B) YJS-720 Hardness Shore A 20±2 Mix Ratio A:B 1:1/10:1 Color / translucent Pot life 25 °C (77F) 30-40mins Curing time 25 °C (77F) 3-4 hours Mixed viscosity mPa.s 5000±1000 Tear-strength kg/cm 20±2 Tensile-strength M.pa 4.0±1.0 Elongation % 500±50 Shrinkage % â?¤0.1% 4.Appearance: Part A: a non-toxic and odorless liquid with translucent color and platinum inside Part B: a non-toxic and odorless liquid with translucent color. ATT: We can do any curing time as your requirements.   Notice: What is the hardness should I choose Normally 5~55 Shore A will be the best, but it also should according to your size and pattern design. 5.SHELF LIFE: When stored at or below 32°C (89.6°F) in the original unopened containers, G-8 series Silicone have a usable life of 12 months. 6.Package 1kg/drum; 20kg/drum;25kg/drum;200kg/drum.

PRODUCT NAME: Agricultural Silicone Trisiloxano adjuvant TEST ITEM SPECIFICATIONS INSPECTION RESULTS Appearance light amber liquid light amber liquid Viscosity, 25°C,mm2/s 20-61 30 Surface Tension, 25°C,mN/m 20.0-23.0 21.3 Specific Gravity, 25°C, g/cm3 1.001-1.050 1.015 RRESULTS: Up to the standard   whatsapp/tel/ 8614707090699 QS-308 spray adjuvant is a super-spreading surfactant based on a trisiloxane ethoxylate. QS-308 spray adjuvant lowers the surface tension of spray solutions, beyond that which is achievable with conventional adjuvants. Typically, QS-308 spray adjuvant (@ 0.1 wt %) gives an aqueous surface tension of

addition cure rtv2 liquid silicone for making mold 1. Description YJS-620 is a two-component 1:1 Mix addition (platinum)cured RTV silicone rubber which cures at room temperature. Because of its considerable fluidity, it is recommended for the duplication of models with many undercuts. This stuff is really thin and easy to pour.    2. Features *high chemical resistance to the aggressive components of some types of resin *High resistance to laceration (this characteristic guarantees high resistance to wear and tear) *High level of accuracy in reproducing very small particulars *High dimensional stability over time and non-deformability *Considerable resistance to high temperatures and to ageing *Excellent non-stick effect *Soft, stretchy, high tear resistance, *Will not shrink in service 3. Technical datasheet Typical general characteristics Inspection Method Value Product data (Catalyzed A+B) YJS-620 Hardness Shore A 20±2 Mix Ratio A:B 1:1/10:1 Color / translucent Pot life 25 °C (77F) 30-40mins Curing time 25 °C (77F) 3-4 hours Mixed viscosity mPa.s 5000±1000 Tear-strength kg/cm 20±2 Tensile-strength M.pa 4.0±1.0 Elongation % 500±50 Shrinkage % â?¤0.1%   3. Common uses *Wax *Urethane (polyurethane) *Plaster Hydrocal, Hydrostone *Polyester casting resin *Low melt metals (mold life can be short) *Cement, Concrete *Epoxy *Soap *Chocolate 4.SHELF LIFE: When stored at or below 32°C (89.6°F) in the original unopened containers, G-8 series Silicone have a usable life of 12 months. 5.Package 1kg/drum; 20kg/drum;25kg/drum;200kg/drum.

a. Name of product :Ferro Silicon Grade 75 b. Price of product: negotiable c. Product origin: Kuwait d. Key Specifications/Special Features e. Harmonization System (HS) Code : f. Minimum Order Size : 100mt g. Packaging details : in bags or bulk in containers

Silicone oven rack edge guard! Includes 2. Makes scorching hot oven shelves cool to touch for sliding out without the need for cumbersome oven mitts. ck edges. * great for daily use. * helps minimize exposure to hot oven rack edges. * just clip on oven rack edges. * made out of heat resistant silicone. Package contents / accessories included: 2 x silicone oven rack edge guards. Weight 70g(2pcs)