Bosiur Chemicals Pvt. Ltd.

Ginger root Botanical name: Zingiber officinale Linn. Family: Zingiberaceae. Ginger oil and oleoresins are the volatile oil derived by steam distillation of ginger and oleoresin. It is obtained by percolating the powdered rhizomes of Ginger, Zingiber officinale with volatile solvents. Ginger contains 1-2 percent of volatile oil, 5-8 percent of pungent acrid oleoresin and starch. Zingiberene is the chief constituent in the oil of ginger. Oil is employed for flavoring all kinds of food products and confectionary and finds limited use in perfumery. Oleoresin, commercially called Gingerin contains pungent principles viz. gingerol and shogaol apart from the volatile oil of ginger and is used as an aromatic, carminative, stomachic and as a stimulant. Oleoresin from ginger is obtained conventionally by extraction of dried powdered ginger with organic solvents like ethyl acetate, ethanol or acetone. Commercial dried ginger yields 3.5-10.0 per cent oleoresin. Ginger oleoresin is a dark brown viscous liquid responsible for the flavour and pungency of the spice. Ginger of commerce or `Adrak` is the dried underground stem or rhizome of the plant, which constitutes one of the five most important major spices of India, standing third or fourth, competing with chillies, depending upon fluctuations in world market prices, world market demand and supply position. Ginger, like cinnamon, clove and pepper, is one of the most important and oldest spices. It consists of the prepared and sun dried rhizomes known in trade as `hands` and `races` which are either with the outer brownish cortical layers (coated or unscraped), or with outer peel or coating partially or completely removed. Ginger requires a warm and humid climate. It is cultivated from sea level to an altitude of 1500 meters, either under heavy rainfall conditions of 150 to 300 cm or under irrigation. The crop can thrive well in sandy or clayey loam or lateritic soils. The composition of dry ginger is given below: Dry Ginger rootMoisture:6.9 % Protein:8.6 % Fat:6.4 % Fiber:5.9 % Carbohydrates:66.5 % Ash:5.7 % Calcium:0.1 % Phosphorous:.15 % Iron:0.011 % Sodium:0.03 % Potassium:1.4 % Vitamin A:175 I.U./100 g Vitamin B1:0.05 mg/100 g Vitamin B2:0.13 mg/100 g Niacin:1.9 mg/100 g Vitamin C:12.0 mg/100 g Calorific value:380 calories/100 g. Ginger Oleoresin is obtained by extraction of powdered dried ginger with suitable solvents like alcohol, acetone etc. Unlike volatile oil, it contains both the volatile oil and the non-volatile pungent principles for which ginger is so highly esteemed. Concentration of the acetone extract under vacuum and on complete removal of even traces of the solvent used, yields the so called oleoresin of ginger. Ginger oleoresin is manufactured on a commercial scale in India and abroad and is in great demand by the various food industries.

[Alias] foaming powder; sodium lauryl sulfate; sodium lauryl sulfate; sodium dodecyl sulfate, sodium dodecyl sulfate [English name] Sodium dodecyl sulfate. [Abbreviation] SDS [CAS No.] 151-21-3 [Molecular formula] ROSO3Na R = C12alkyl, C12-C14alkyl [Molecular weight] 288.38 (R = C12alkyl), 296 (R = C12-C14alkyl) [Grade] It can be divided into industrial grade (GB/T15963-2008), toothpaste grade (QB/T2900-2012), latex grade and reagent grade according to application fields and standards. [Technical Indicators] [Performance and Applications] This product is a white or yellowish sticky substance, commonly used in detergents and textile industry. Belon to an anionic surfactant.It is easy to dissolve in water, has good compatibility with anions and nonions, and has good emulsification, foaming, penetration, decontamination and dispersion properties. It is widely used in toothpaste, shampoo, shampoo cream, shampoo, washing powder, liquid washing, cosmetics and plastic demoulding, lubrication, pharmaceutical, papermaking, building materials, chemical and other industries. (1) Used as detergent and textile auxiliaries, also used as toothpaste foaming agent, mine fire extinguishing agent, emulsion polymerization emulsifier, wool detergent, etc. (2) Used as anionic surfactant, emulsifier and foaming agent (Use 3) GB 2760-96 stipulates that it is a processing aid for food industry. Blowing agent; emulsifier; anionic surfactant. Used for cake, beverage, egg white, fresh fruit, fruit juice beverage, edible oil, etc. (4) It is used as an emulsifier for drugs, cosmetics and synthetic resins. Foaming agent for toothpaste and fire extinguisher. Used as a detergent for fine silk and wool fabrics. Flotation agent for metal beneficiation. (5) Used as detergent and textile auxiliaries, also used as toothpaste foaming agent, fire extinguishing foam liquid, emulsion polymerization emulsifier, pharmaceutical emulsion dispersant, shampoo and other cosmetics, wool detergent. (Use 6) Biochemical analysis, electrophoresis, ion pair reagent

[Technical Indicators] 1. Industrial grade Indicator Name/Indicator Value Powdered Products (F) Needle Products (Z) Level 92 Level 93 Level 95 Level 92 Level 95 Appearance White or light yellow powder, without caking White or yellowish needle-like, without lumps Active matter,% 92.0 93.0 95.0 92.0 95.0 Free oil,% 1.2 1.2 1.2 2.0 1.5 Inorganic salt,% Sodium sulfate 5.8 4.8 2.5 4.8 2.5 Sodium chloride 0.15 0.15 0.15 0.15 0.15 Moisture,% 2.0 2.0 2.0 4.0 3.0 PH value (1% aqueous solution) 7.5-9.5 7.5-10 Whiteness (WB), 90 2. Toothpaste grade Indicator Name/Indicator Value Toothpaste Grade (Y) (I) Level (II) Level (III) Level Appearance White or yellowish powdery or needle-like, without caking Active matter,% 95.0 93.0 93.0 Free oil,% 1.2 1.2 1.2 Inorganic salt,% Sodium sulfate 2.5 3.2 4.0 Sodium chloride 0.15 0.15 0.15 Moisture,% 2.0 2.0 3.0 PH value (1% aqueous solution) 8-9.3 8-9.3 8-10 Whiteness (WB), 90 Foaming capacity/mm 180 Heavy metal (as Pb)/ (mg/Kg), 15 Arsenic content (as As)/ (mg/Kg), 3 Total bacterial count/ (CFU/G), 100 Total number of molds and yeasts/ (CFU/G), 100 Fecal coliforms/G Not to be detected Pseudomonas aeruginosa/G Not to be detected Staphylococcus aureus/G Not to be detected   3. Latex grade Indicator Name/Indicator Value Latex grade (powder, needle, liquid) Aggregate grade Seed level Liquid K12 Appearance White or yellowish powdery or needle-like, without caking Light yellow transparent liquid Active matter,% 94.0 92 28.5-30.5 Free oil,% 0.8-1.0 1.5-2.0 1.5 Inorganic salt,% Sodium sulfate 3.0 3.0 1.5 Sodium chloride 0.15 0.15 0.05 Moisture,% 3.5 3.5 - PH value (1% aqueous solution) 8-10 7.5-9.5 Whiteness (WB), 90 - Color Klett (30% active), - 60 4. Reagent grade Indicator Name/Indicator Value Reagent grade Level 99% Level 97% Appearance White flaky crystals White powder Solubility (1%, alcohol) Completely dissolved Solubility (10%, aqueous solution) Completely dissolved Chroma APHA (20%, deionized water), 15   - Active matter (%), â?¥ 99 (on dry basis) 97 Petroleum ether soluble matter (%), 0.2 1.0 Sodium sulfate (%), 0.5 1.5 Sodium chloride (%), Moisture (%), 1.0 2.0 PH value (1% aqueous solution) 6.0-8.0 6.0-11 Phosphate, 1ppm - Lead (Pb), 2ppm Iron (Fe), 1ppm Nitrogen, 5ppm - Arsenic (As), 0.1ppm Fraction content (%), 99.0 Absorbance (3%, deionized water) 230nm 0.4 260nm 0.1 280nm 0.1 - 410nm 0.01

FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47

product: Linear-Alkyl benzene sulfonic Acid LABSA 96% APPLICATION 1)raw material for cleaning products : laundry detergent powder, hair shampoo, bath shampoo, dish detergent and complex soap, dishware cleaner and toilt cleaner. 2)It can be used as curing catalyst of amino baking paint, used for preparing various liquid and solid detergents. 3)Used as raw materials for ammonium salt, sodium salt and calcium salt for the production of alkyl benzene sulfonic acid. Specification PRODUCT Linear Alklybenzene Sulphonic Acid (LABSA) Other name Anionic surfactant other name Dodecyl benzene sulphonic acid ï¼?DBSAï¼? Grade standard Industrial Grade / Detergent Grade Appearance brown Viscous liquid Purity 96% min CAS 27176-87-0 HS 34021100.00 CF C18H30SO3 MF r-c6h4-so3h Mol. wt 326.49 Main use raw mateial for laundry detergent powder, hair shampoo, bath shampoo, dish detergent and complex soap, dishware cleaner and toilt cleaner. Content of A.M: 96% min Free oil : 1.5% max Inorganic acid: 1.5% max Color(Klett): 20-40max Average Molecular weight: 319-325 Packing & Delivery Main packing for export is ISO bucket 215kg, IBC bucket 1000kg, and ISOTANK Other packing : 1kg-200kg accordingly customer requried

CAS No. 68585-34-2 Sodium Lauryl Ether Sulfate 70% (SLES 70%) is a kind of anionic surfactant with excellent performance. It has good cleaning, emulsifying, wetting and foaming properties. It is soluble in water easily, compatible with many surfactants, and stable in hard water. It is biodegradable with low irritation to skin and eye. Detailed Images Items Value Active Matter % 70�±2.0 Unsulphated matter(ref. 100% active matter) 2.5 max Sodium Sulphate(ref. 100% active matter) 1.5 max pH-value(1% SLES solution) 7.0 ~ 9.5 Color (5% Am) Klett 10 max

Categories Others Qty in 20 FCL 25000kg Min Order 1000kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC E No. E524 CAS No. 1310-73-2 HS Code 281511 Specification FCC/USP Sodium Hydroxide E524, CAS No.1310-73-2, also called Caustic Soda, it appears either white flakes or a white granular powder. Food grade sodium hydroxide is an essential ingredient in manufacturing of Sodium Stearate, Sodium Bicarbonate, and various other sodium salts. Sodium Hydroxide is also used for pH and alkalinity adjustment. As an experienced Sodium Hydroxide manufacturer and supplier, we has been supplying and exporting Sodium Hydroxide for almost 10 years. Please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Sodium Hydroxide Specification ITEM STANDARD RESULTS NaOH 99.00 99.04 Na2CO3 0.5 0.36 NaCl 0.03 0.03 Fe2O3 0.005 0.003

Categories Others Qty in 20FCL 25000kg Min Order 500kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC E No. E500 CAS No. 144-55-8 HS Code 283630 Specification FCC/USP Sodium Bicarbonate, also called Baking Soda, E500, CAS No.144-55-8, is a sodium salt of carbonate manufactured through chemical synthesis, available as white crystalline powder used as leavening agent. Sodium Bicarbonate reacts with acidic components in batters, releasing carbon dioxide which causes expansion in the batter and forms grainy texture in applications like pancakes, quick bread or fried foods. As Sodium Bicarbonate Manufacturers, Suppliers and Wholesalers in China, we supply USP/FCC Sodium Bicarbonate. As an experienced Sodium Bicarbonate manufacturer and supplier, we has been supplying and exporting Sodium Bicarbonate for almost 10 years. Please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Sodium Bicarbonate (Baking Soda) Specification Items Specifications Appearance White crystalline powder Assay (dry Basis, %) 99.0-100.5 pH (1% Solution) 8.6 Loss on Drying (%) 0.20 Chlorides (Cl, % 0.50 Ammonia Pass test Insoluble substances Pass test Whiteness (%) 85 Lead (Pb) 2 mg/kg Arsenic (As) mg/kg Heavy Metal (as Pb) 5 mg/kg

Basic information Chemical Description: Sodium Bicarbonate Chemical Name: Baking Soda, Bicarbonate of Soda CAS number: 144-55-8 Chemical Formula: NaHCO3 Molecular Weight :84.01 Solubility : Easy dissolvable in water, (8.8% at 15 and 13.86% at 45 )and the solution is weakly alkaline, Insoluble in ethanol. Sodium Bicarbonate :99.0%-100.5% Appearance: White crystalline powder odorless, salty. HS Code: 2836300000 Yearly output: 100,000TONS Quality Index: Quality Standard: GB 1886.2-2015 Product name: sodium bicarbonate food grade ITEMS SPECIFICATIONS Total alkali content(As NaHCO3) ,w% 99.0-100.5 Loss on drying,w % 0.20%max PH value(10g/l water solution) 8.5max Ammonium Pass the test Clarify Pass the test Chloride,(as Cl),w% 0.40max Whiteness 85.0min Arsenic(As) (mg/kg) 1.0max Heavy metal (as Pb)(mg/kg) 5.0max Package 25kg ,25kg*40bags,1000kg jumbo bag or according to customer's request