Artemisia scoparia has the effects of clearing blood, nourishing the heart, reducing blood pressure, moistening the lungs, clearing the phlegm and so on. The stems and leaves of Artemisia scoparia are rich in vitamins, carotene, various amino acids and dietary fiber.
The large pore adsorption resin of Artemisia argyi provided by Suzhou Bojie Resin Technology Co., Ltd. has the advantages of large adsorption capacity, fast adsorption rate, strong selectivity, high mechanical strength and low dissolution rate. The extraction effect is very good, the regeneration is simple, and the operating conditions are mild. It is economical and practical and has been widely used in plant extraction.
Gentian is a traditional Chinese medicine for clearing diarrhea and liver and gallbladder. It is a bitter and healthy stomach medicine used abroad. It is derived from the gentian plant gentian, gentian, etc., containing iridoid glycosides, which is the main active ingredient of gentian. .
The content of gentiopicroside in gentian crude drug is high, and the macroporous adsorption resin can be used after water extraction, and the high purity gentiopicroside product can be separated by resin adsorption method. The method has simple process and low cost, and is suitable for use in Mass production.
Suzhou Bojie Resin Technology Co., Ltd. provides gentian glucoside adsorption resin with large adsorption capacity, convenient regeneration and desorption, and is widely used in plant extraction.
WL-2201
Specification: Appearance: pale yellow to yellow flake Ash (%): 0.1 Softened point (): 80 / 95
Application: WL-2201 is a vulcanizing agent of natural rubber and various synthetic rubber (such as butylbenzene, chlorobutyl, butyronitrile and butyl), in particular to a rubber vulcanizing agent which is difficult to vulcanize due to the unsaturation. The invention is mainly used for manufacturing tires, joints, seals, transmission belts, food containers and the like, and can be directly added into the rubber material during mixing, and the vulcanizing agent has excellent high heat resistance, high pressure resistance and aging resistance.
Package:25 kg kraft paper inner lined with plastic bag
Storage: Flaked phenolic resin should be stored in dry, ventilated and cool places (below 20 ) to avoid direct sunlight and stay away from heat sources. The storage period is 6 months (below 20 â??).
Note: this product can be customized according to customer requirements
WL-2203
Specification: Appearance: yellow/ light brown sheet or particle softening point ():80-105 hydroxymethyl content (%):% 1.0 min acid value (mgkoh/ g):55-10 Loss on heating 1.0 max.ash (%):0.1max.
Application:Wl-2203 is a tackifier for natural rubber and synthetic rubber (such as butylbenzene, butyl, butyronitrile, triethylacrylate). Can be used for producing tires, belts, hoses, food containers, gaskets and soles, and the like. The resin can reduce the Mooney viscosity of the sizing material, improve the self-adhesive property of the sizing material, improve the physical and mechanical properties of the sizing material and the thermal aging property, and has no adverse effect on the vulcanized rubber.
Package:25 kg kraft paper inner lined with plastic bag
Storage: phenolic resin should be stored in dry, ventilated and cool places (below 25 ) to avoid direct sunlight and stay away from heat sources. The storage period is 1year.
Note: this product can be customized according to customer requirements
Phenolic resin WL-2302
Appearance:dark brown flake or granular
Epoxy adhesives can adhere to various materials in many industrial applications, including steel, metal, plastic, etc. Everwide provides services for customers who may need special requirements in electronic applications. Such as reinforcement, sealant, potting, coating, etc.
Oil of Myrrh Commifora myrrha East Africa. Heavy warm base note.
Oil of Myrrh Commifora myrrha East Africa. Heavy warm base note.
Apart from being a very reputable oil in the field of aromatherapy, it has plenty of medicinal uses too. Letâ??s look at the most common health benefits it has in stock for us.
Inhibits Microbial Growth.Myrrh essential oil does not allow microbes to grow or infect your system
Product Description
Oil of Myrrh Commifora myrrha East Africa. Heavy warm base note.
Oil of Myrrh Commifora myrrha East Africa. Heavy warm base note.
Apart from being a very reputable oil in the field of aromatherapy, it has plenty of medicinal uses too. Letâ??s look at the most common health benefits it has in stock for us.
Inhibits Microbial Growth
Myrrh essential oil does not allow microbes to grow or infect your system. It can be used to prevent many problems occurring due to microbial infections such as fever, food poisoning, cough and cold, mumps, measles, pox, and infection of wounds. It has no adverse side effects, unlike other antibiotics, such as weakening of liver or digestive malfunction.
Astringent Properties
Myrrh essential oil is an astringent, which means that it strengthens the gums and muscles, intestines, and other internal organs, and smoothens the skin. It also strengthens the grip of hair roots, thereby preventing hair loss. One more serious aspect of this astringent property is that it stops hemorrhaging in wounds. When this astringency makes the blood vessels contract and checks the flow of blood, it can stop you from losing too much blood when wounded.
Relieves Cough
Myrrh essential oil is good for cold and cough. It fights the viral infections that can cause them, as well as relieves congestion, and reduces the deposition of phlegm in the lungs and respiratory tracts.
TC100 / copolymerized hydrocarbon resin is produced with and fraction, which has and strengths.It can replace the expensive C5 hydrocarbon resin in hot melt adhesive and rubber tire fields.
In rubber tires, TC100 hydrocarbon resin not only can increase the adhesive force between colloidal particles, but also can enhance the adhesion between the particle and the cord thread.TC100 hydrocarbon resin is suitable for producing high quality rubber products. In adhesive, TC100 hydrocarbon resin have better initial adhesion and it also can adjust the adhesive durability and bonding strength.
Product Specification:
Item Test Method Unit Specification Range
Softening Point ASTM-E28-58
95-105
Color ASTM-D-1544 GC 4Max
Insoluble ETM-E-99 Vol% 0.05Max
Acid Value ASTM-D-974 Vol% 0.2Max
Specific Gravity ASTM-D-71-72A g/
0.99-1.03
Features of TC100 C5/C9 Copolymerized Hydrocarbon Resin:
Wide optional range.It will be more stabilized by the addition of antioxidant.Good compatibility with EVA,SIS and SBS etc.
WQ-869 Specification of Water Based Solid Acrylic Resin
Confidential
It is recommended that WQ-869 and Joncryl@HPD696 are replaceable to each other as they have the same performances (Joncryl @HPD696)
WQ-869 is a high molecular composition acrylic resin which can improve pigment dispersition, maintain a fine gloss and sustain paint stability. The combination of high pigment loading and low viscosity will allow the manufacturers to strength color settlement with delicate gloss finish, meanwhile, the formulating flexibility will not be decreased in one way or another.
Paint made from WangQin acrylic polymers and resins is superior to any traditional resins with regard to liquid flow, stability, gloss finish and solubility. The paint processing control and stringent quality assurance have guaranteed a consistent and reliable product quality.
Whether applied to screen printing, flexo printing or gravure printing, WangQin acrylic resin is capable of ensuring superior adhesion, sharpness and color rich diversity. Those benefits are well competing with brands such as BASF, HANWHA but also providing significantly and enhanced performances and improved adds-on value for investment from cost point of view.
Considering similar product performances and much more cost-effective factors, it is recommended to use WangQin Water based
HANWHA: S-70, S-120, S-820, S-20
WQ-869 Key Features & Benefits:
Excellent Pigment Dispersition
High Transparency and Super gloss efficiency
Long-life Color Endurance
High Molecular Weight
General Information:
Classic Physical Characteristics
Appearance Transparent Solid
Solid Content >99%
Acid Value 215
Softening Point() 155
Average Molecular Weight 16500
Tg ( 102
Can be cured at between 120 150. Even higher temperature, it has good yellowing resistance. It is suitable for coil coating and can coating. It has very good results for dipping primer applications. It is also for clear gloss protective coating.
Performance Advantages:
Low odor
LOW VOC
Non yellowing, even at high temperature curing
Good hardness development
Applications:
All kinds of baking systems
Metal primer and topcoats
Industrial applications
Spray, roller, brush or dipping can be used.
Type of polymer Waterborne acrylic modified saturated polyester resin
Non-volatile(%) 70±2
Viscosity( 25, mpa*s) 30-70*
PH ----
Neutral.agent Non neutralization
OH value on solids (mgKOH/g) 105
Air dry Inapplicable
Cross-Linking with amino resin Applicable
Grinding Applicable
Drying speed better
Corrosion resistance better
weatherability better
PS:The Viscosity with*is measured in the case of the resin diluted by equivalent amount of propylene glycol methyl ether
3, Product Properties:
Good hardness (>4H), high gloss;
Good flexibility;
Good solvent resistance;
Low temperature fast cross-linking (110. 20minutes);
Excellent shear stability, can be grinded with dispersions directly.
4, Instructions:
WL-182 can be diluted with water after neutralization by N,N-dimethyl ethanolamine the amount of which is about 4-5%of WL-182.It has tocombine waterborne amino resin to make baking coating. The suggested amount is about 20-30% of WL-182 by weight. The baking temperatureis above 120. The baking conditions and film properties are related with the amino resins used. Right amount of waterborne acidic catalysts canbe added when using methyl etherified amino resin(recommended adding amount is 0.5-1% of WL-182), which can accelerate solidifying.
PH value of the coating system can always be adjusted with organic amine or ammonia. Viscosity of the dispersion will increase as the PH valueincreases. The resin can help to wet pigments, so wetting agent may reduce.
5, Storage:
It is suggested that the product should be stored in a cool and dry weak alkaline place. The quality guarantee period is 6 months, and the expiredproducts can still be used after passing the inspections.
6, Applications:
Amino-baking top coatings.
7, Note:
The specification is a general introduction to the products of our company. It will be adjusted with the product improvement. Please contact with thecompany to obtain the latest product description.
epoxy coating contains the following added features:
Extremely Long Lasting
Flexible & Durable
Water resistant
High-Gloss
Heat Resistant
Economical
Reduces Maintenance Costs
Lead-free
Nontoxic
Rustproof
One Application Only
Acid & Saltwater Resistant
Protects Against Environmental Hazards
High Adhesion
1,Product Composition:
Waterborne Epoxy Ester Resin, Cosolvent, Neutralizing Agent, Water
2,Typical Date
Type of polymer Waterborne epoxy ester resin
Non-volatile(%) 70�±2
Viscosity( 25â??, mpa*s) â?¤200*
PH ----
Neutral.agent DMEA
OH value on solids (mgKOH/g) ----
Air dry Applicable (Oxidation Cross-linking)
Cross-Linking with amino resin Inapplicable
Grinding Applicable
Drying speed better
Corrosion resistance better
weatherability better
PS:The Viscosity with*is measured in the case of the resin diluted by equivalent amount of propylene glycol methyl ether
3,Product Properties:
Excellent anticorrosion performance, especially for the preparation of anti-rust base coating;
Fast drying speed, good hardness;
Excellent salt fog-spray resistance and early water resistance:
Good storage stability;
Excellent shear stability, can be grinded with dispersions directly.
4,Instructions:
WL-172 can be diluted with deionized water or lower alcohol or alcohol ether to white emulsion. It can be dried by oxidation cross-linking addingoily/water driers at normal temperature or low-temperature baking. The oily driers need to be diluted by the solvent such as butyl alcohol or ethanolfor use.
The water dispersion of WL-172 is stable at neutral or slight alkaline conditions pH value has to be carefully observed in coating production sinceprecipitation may occur if acidic pigments like carbon black are used in the system. PH value of the coating system can always be adjusted
triethylamine or N, N-dimthylethanolamine. Viscosity of the dispersion will increase as the PH value increases.
5,Applications:
Air-drying or low temperature baking antirust coatings.
6,Note:
The specification is a general introduction to the products of our company. It will be adjusted with the product improvement. Please contact with thecompany to obtain the latest product description.
Can be cured at between 120150. Even higher temperature, it has good yellowing resistance. It is suitable for coil coating and can coating. It has very good results for dipping primer applications. It is also for clear gloss protective coating.
Performance Advantages:
Low odor
LOW VOC
Non yellowing, even at high temperature curing
Good hardness development
Applications:
All kinds of baking systems
Metal primer and topcoats
Industrial applications
Spray, roller, brush or dipping can be used.
Type of polymer Waterborne acrylic modified saturated polyester resin
Non-volatile(%) 70±2
Viscosity( 25, mpa*s) 30-70*
PH ----
Neutral.agent Non neutralization
OH value on solids (mgKOH/g) 105
Air dry Inapplicable
Cross-Linking with amino resin Applicable
Grinding Applicable
Drying speed better
Corrosion resistance better
weatherability better
PS:The Viscosity with*is measured in the case of the resin diluted by equivalent amount of propylene glycol methyl ether
3, Product Properties:
Good hardness (>4H), high gloss;
Good flexibility;
Good solvent resistance;
Low temperature fast cross-linking (110 20minutes);
Excellent shear stability, can be grinded with dispersions directly.
4, Instructions:
WL-182 can be diluted with water after neutralization by N,N-dimethyl ethanolamine the amount of which is about 4-5%of WL-182.It has tocombine waterborne amino resin to make baking coating. The suggested amount is about 20-30% of WL-182 by weight. The baking temperatureis above 120â??. The baking conditions and film properties are related with the amino resins used. Right amount of waterborne acidic catalysts canbe added when using methyl etherified amino resin(recommended adding amount is 0.5-1% of WL-182), which can accelerate solidifying.
PH value of the coating system can always be adjusted with organic amine or ammonia. Viscosity of the dispersion will increase as the PH valueincreases. The resin can help to wet pigments, so wetting agent may reduce.
5, Storage:
It is suggested that the product should be stored in a cool and dry weak alkaline place. The quality guarantee period is 6 months, and the expiredproducts can still be used after passing the inspections.
6, Applications:
Amino-baking top coatings.
7, Note:
The specification is a general introduction to the products of our company. It will be adjusted with the product improvement. Please contact with thecompany to obtain the latest product description.
Rider Vivan Brand New Dark Cherry Rawhide Hand-Braided Romal Reins.
Specially Hand-Crafted by Our Braiding Experts.
Reins Are 16 Plaits & Romal Is 16 Plaits.
Rein Part Is 55" Long Which Includes 3" Bit Loops.
Romel Is 55" Which Includes The 10" Leather Popper.
An Overall Length Of Product is 9' 4".
These Reins Are Firm And Will Hold A Nice Drape In The Reins.
PL Series are polyester resin based thermoplastic pigments used for Plastic coloring / Masterbatch applications and are compatible with most polymers except PVC. The recommended usage temperature ranges from 130-240 °C.
HTR Series are polyamide resin based thermoplastic pigments which offer improved properties as compared to PL series especially, very low mould plate out, heat resistance (up to 280 C brilliance etc.)
1.Description
D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc.
2.Typical Physical and Chemical Properties:
Items Specification
Polymer Matrix Structure Acrylic Crosslinked with DVB
Physical Form and Appearance Ivory opaque spherical particle
Functional Groups R-COOH
Ionic Form ,as shipped H+
Total Capacity, H+ form, wet, volumetric 2.7 eq/l min
Moisture Retention, H+ form 55-65%
Particle Size Range 0.3mm-1.2mm
1.Description
D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc.
2.Typical Physical and Chemical Properties:
Items Specification
Polymer Matrix Structure Acrylic Crosslinked with DVB
Physical Form and Appearance Ivory opaque spherical particle
Functional Groups R-COOH
Ionic Form ,as shipped H+
Total Capacity, H+ form, wet, volumetric 2.7 eq/l min
Moisture Retention, H+ form 55-65%
Particle Size Range 0.3mm-1.2mm
1.Description
D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc.
2.Typical Physical and Chemical Properties:
Items Specification
Polymer Matrix Structure Acrylic Crosslinked with DVB
Physical Form and Appearance Ivory opaque spherical particle
Functional Groups R-COOH
Ionic Form ,as shipped H+
Total Capacity, H+ form, wet, volumetric â?¥2.7 eq/l min
Moisture Retention, H+ form 55-65%
Particle Size Range 0.3mm-1.2mm
1.Description
D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc.
2.Typical Physical and Chemical Properties:
Items Specification
Polymer Matrix Structure Acrylic Crosslinked with DVB
Physical Form and Appearance Ivory opaque spherical particle
Functional Groups R-COOH
Ionic Form ,as shipped H+
Total Capacity, H+ form, wet, volumetric 2.7 eq/l min
Moisture Retention, H+ form 55-65%
Particle Size Range 0.3mm-1.2mm
1.Description
D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc.
2.Typical Physical and Chemical Properties:
Items Specification
Polymer Matrix Structure Acrylic Crosslinked with DVB
Physical Form and Appearance Ivory opaque spherical particle
Functional Groups R-COOH
Ionic Form ,as shipped H+
Total Capacity, H+ form, wet, volumetric 2.7 eq/l min
Moisture Retention, H+ form 55-65%
Particle Size Range 0.3mm-1.2mm
1.Description
D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc.
2.Typical Physical and Chemical Properties:
Items Specification
Polymer Matrix Structure Acrylic Crosslinked with DVB
Physical Form and Appearance Ivory opaque spherical particle
Functional Groups R-COOH
Ionic Form ,as shipped H+
Total Capacity, H+ form, wet, volumetric2.7 eq/l min
Moisture Retention, H+ form 55-65%
Particle Size Range 0.3mm-1.2mm
