Stabilizer 1 unit per box
UV-5151 is a liquid blend of a hydrophilic 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer(HALS).It has been designed to fulfil high cost/performance and durability requirements of exterior waterborne and solvent borne industrial and decorative coatings. The broad UV absorbance of the used UVA makes it suitable for a wide range of coatings for wood, plastics and metal. The synergistic combination imparts superior coating protection against gloss reduction, cracking, blistering, delamination and color change and provides full substrate protection. Appearance : Viscous amber liquid. Active ingredient, %: 93min. Viscosity at 25 degree: 7000mPa.s max. Density at 20 degree: 1.10 g/cm3 Ash, %: 0.1max. Transmittance: 460nm 95%min. 500nm 97%min. UV-5151 is a universal light stabilizer which can be used in a variety of solvent borne and waterborne industrial and decorative coating systems
UV-5050 is a liquid light stabilizer blend developed specifically for coatings. Its high thermal stability and permanence makes it suitable for coatings exposed to high bake temperatures and/or to extreme environmental conditions. It has been designed to fulfill the high cost/performance and durability requirements of trade sales and industrial coating applications. Its broad UV absorbance allows effective protection of light sensitive substrates such as wood and plastics. Appearance : Viscous amber liquid Viscosity at 25 degree: 10000mPa.s Density at 20 degree: 1.03 g/cm3 Miscibility: UV-5050 is miscible to more than 50% with most commonly used paint solvents.Water solubility is less than 0.01%. UV-5050 is a versatile light stabilizer which can be used in a wide variety of clear and pigmented coating systems, based on water-borne or solvent-borne paint technology. Its use is especially recommended for clear and light pigmented coatings in applications
Stabilizers are fairly short subs which have blades attached to external surface. By providing support for the BHA (Bottom Hole Assembly) at certain points they can be used to control the trajectory of the well. The blades can be either straight or spiral in shape. Spiral blades can give 360�¯�¿�½?�?�° contact with the borehole. Orchid Energy Co can provide string stabilizer and near bit stabilizer, straight integral blade stabilizer(IBS),spiral integral blade stabilizer(IBS), replaceable sleeve stabilizer, non-rotating stabilizer, and non magnetic stabilizers etc. Stabilizers are manufactured from 4145H alloy steel bar or forgings, quenched and tempered to 285-341 Brinell hardness; Hard facing types are HF1000, HF2000, HF3000, HF4000, HF5000. All above products are manufactured according to API Spec 7-1 standard. Options Available: straight integral blade stabilizer, spiral integral blade stabilizer, replaceable sleeve stabilizer, non-rotating stabilizer or non magnetic stabilizers; 4145H Alloy steel, Non-magnetic steel; String Type stabilizer, Near Bit Type stabilizer;
1 Quick Details Product Name: PVC One Pack Ca-Zn Stabilizer Product Model:AIMSTA-CZ451 Main applications: rubber sole and plaything Appearance: Powder Package: 50kg in plastic bucket Storage: in a cool dry place, to avoid sun and rain CasNo:1592-23-0 Certifications: REACH & RoHS HS code :3812399000 Purity:99.00% Payment term: :L/C,T/T,LC at sight or 30% advance & 70% against copy docs Min.Order:1 Metric Ton Origin: China Port: Shenzhen port, China Transportation: By sea ProductionCapacity:100000 Metric Ton/Year 2 Key specifications/special features Non-toxic stabilizer, No lead, cadmium no harmful chemical. Good transparency, good initial coloring, good dynamic processing performance. No phenol, smell-less. Dynamic lubrication balance 3 Product origin PVC resin molding processing into PVC plastic products, must be added to a variety of additives, in order to ensure the smooth molding of products and have excellent performance. Stabilizer is help to keep plastic performance or close to the original performance and material added in the formulation, is to stop or inhibit polymer by outside factors (light/hot/oxygen/mold/bacteria that simple long stored) caused by the damage. 4 Superiority Our Ca-Zn Stabilizer is manufactured according to the advanced concept of environmental protection which is free of lead, Cd, barium, tin, or any other harmful metals. Our Ca-Zn Stabilizer meets the latest European environmental protection standards of REACH & RoHS. 5 Keywords PVC stabilizer , stabilizer, heat stabilizer, chemical additive, plastic additives, pvc heat stabilizer, pvc compound stabilizer Calcium-Zinc stabilizer
Solar Batteries,Gel Batteries,AGM Batteries,Nickel cadmium Batteries,Lithium batteries, Battery chargers, UPS, Static Frequency Converters, Motor Generator Frequency Converter,Rotary Frequency Converters, Dynamic frequency converter,Variable frequency drive,DC-DC Converters, Stabilizers, Solar Panel Clean Robots, Solar Inverters, 110Vdc Electricity Inverters, 125VDC Industrial UPS, POE DC UPS.
Certification:FCC, ce, RoHS, Sgs Brand Name:CensReal/OEM Place of Origin:Guangdong, China Model Number:CR-S6 Dimension:120cm(L)*50cm(W)*291cm(H) Weight:400 g Max Loading Capacity:270 g Material: ABS Application:for Mobilephones and Go pro3, Go pro4, SJ CAM, Yi cam Working Voltage:3.4~4.2V Working current:0.2A~2A Yaw angle range:-160~ +160 Pitch angle range:-160(left)~ +160(right) Roll Working Angle:-90~ +90 Accessories:gimbal*1, instruction book*1, use charging cable*1 Color:grey
Certification: FCC, ce, RoHS, Sgs Brand Name: CensReal/OEM Place of Origin: Guangdong, China Model Number: CR-S6 Dimension: 120cm(L)*50cm(W)*291cm(H) Weight: 400 g Max Loading Capacity: 270 g Product Name: Mobile Phone Camera Handheld Gimbal Stabilizer without APP Material: High density ABS handheld gimbal stabilizer for mobilephone and go pro Application: for Mobilephones and Go pro3, Go pro4, SJ CAM, Yi cam Working Voltage: 3.4~4.2V Working current: 0.2A~2A Yaw angle range: -160~ +160 Pitch angle range: -160 (left)~ +160 (right) Roll Working Angle: -90~ +90 Accessories: gimbal*1, instruction book*1, use charging cable*1
Specification Size range: 8 1/2"~26" Material: AISI 4145H/AISI 4145H mod/AISI 4340/AISI4140-4142/non-mag material Forging process: Ingot---forging---heat treatment---rough machining---UT.MT---Q+T---inspection---finishing machining Heat treatment: Normalized / Annealed / Quenched / Tempered Hardfacing: HF1000, HF2000, HF3000, HF4000, HF5000
Specification Size range: 8 1/2"~26" Material: AISI 4145H/AISI 4145H mod/AISI 4340/AISI4140-4142/non-mag material Forging process: Ingot---forging---heat treatment---rough machining---UT.MT---Q+T---inspection---finishing machining Heat treatment: Normalized / Annealed / Quenched / Tempered Hardfacing: HF1000, HF2000, HF3000, HF4000, HF5000
Lake Petroleum supplies a complete line of downhole drilling stabilizers to increase rate of penetration and control hole deviation problems. All these stabilizers (including drill bit type, drill string type, spiral bladeilling, straight blade, integral blade, welded blade, sleeve-type, and stainless steel nonmagnetic types) are designed to meet the strictest quality control and quality assurance standards (API SPEC.). All alloy stabilizers are manufactured from AISI 4145H modified heat-treated steel for a wide variety of configurations and hole sizes.
Lake Petroleum supplies a complete line of downhole drilling stabilizers to increase rate of penetration and control hole deviation problems. All these stabilizers (including drill bit type, drill string type, spiral blade, straight blade, integral blade, welded blade, sleeve-type, and stainless steel nonmagnetic types) are designed to meet the strictest quality control and quality assurance standards (API SPEC.). All alloy stabilizers are manufactured from AISI 4145H modified heat-treated steel for a wide variety of configurations and hole sizes.
Our Smartphone Stabilizer solutions had been mass produced and sold all over the world, with the stabilizer, and the functions of the app, such as AI tracking/ Time-lapse photography/ Hitchcock/ Panorama photography/ FPV Rotation/ Slow motion, amateurs could make film simply through Smartphone.
Uses Sample baking, drying and sample digestion test, is a necessary tool for geological, metallurgical, environmental protection, agriculture, grain and cooking oil, forestry, food, medical and health, biochemical and other laboratories, as well as teaching and research. Sample digestion before chemical analysis of soil, feed, plants, seeds, heavy metals, ore. It is an ideal equipment of sample pretreatment for analytical instruments such as AA, ICP, ICP-MS, and atomic fluorescence. It can also be used for pretreatment and acid removal treatment of microwave digestion. Structure Metal frame, anti-corrosion coating, silicon carbide angular beam, ceramic fiber, high-alumina combined heating plate. ï?¶ Features Convenient operation, fast heating, doesnt expose wires, no open fire, no fire hazards. Insulation protection, safe and reliable. Gradient temperature control, Max. Temperature 500/700. Can be used directly or in combination with silicon carbide plate, so that the temperature uniformity, anti-corrosion have achieved better results.
Charateristics and Uses: Mainly used in paint, coatings, printing ink, polyurethane paint. This product can effectively prevent the coating to maintain shiny in the sun exposure. avoiding cracking and produce spots, burst and surface stripping, thus greatly improving coating life. This product is a synergistic effect with UV absorber
Characteristics and Usesï¼? The product is wnameely used in polyethylene, polypropylene, polystyrene, olefin copolymer and polyester, soft PVC, polyurethane, metaformaldehyde and polyamnamee.
Characteristics and Usesï¼? Sulfur and halogen-containing substances as well as some stabilizing agents, pesticnamees and flame retardants might affect the effect of this product. Hence, laboratory test must be conducted before this product is used with the above-mentioned substances.
Stabilizer 770 Chemical Name Bis(2,2,6,6-tetramethyl-4-piperidyl)sebaceate Features and Application With better effects than other most frequently used light stabilizers,blended with antioxidant,providing heat stability,working well with UV Absorber. Wide used in PP,HDPE,PU,PS,ABS etc.
PRODUCT DESCRIPTION ___________________________________________ Ice cream stabilizer is a compound ingredient including food emulsifiers and stabilizers. All the ingredients are based on raw materials of non-animal origin. USAGE INFORMATION ____________________________________________ The dosage is 0.5% Mix the milk, sugar and others materials with emulsifying stabilizer as the ratio, dissolved with water, stirring and heating. Then, heat to 75-80â?? and hold 20-30 minutes. And then homogenized, put them into the aging cylinder for 2-3 hours, then, adjust the color and odor. LEGAL DECLARATION _______________________________________________ Ice cream stabilizer INGREDIENT LIST Food emulsifier E471 25% E491 10% E322 13% Guar gum( E412) 22% Carrageenan ( E407) 13% Sodium alginate(E401) 10% Xanthan gum(E415) 7% APPEARANCE Yellow powder FOOD CONTAMINANT Raw materials are guaranteed food grade in conformity with the applicable legislation on: Heavy metals ARSENIC (As) (mg/kg) â?¤ 3 MERCURY (Hg) (mg/kg) â?¤1 CADMIUM (Cd) (mg/kg) â?¤ 1 HEAVY METALS (as Pb) (mg/kg) â?¤ 10 INDICATIVE MICROBIOLOGICAL VALUES TOTAL PLATE COUNT (CFU/g) â?¤ 1000 YEAST AND MOULD (CFU/g) â?¤ 100 COLIFORMS ABSENT IN 0.1g SALMONELLA ABSENT IN 25g
FEATURES Power Rating500VA-10KVA / 5KVA-45KVA Power Factor0.8 Reset SwitchManual Reset Switch Bypass SwitchManual Bypass Switch For 3 KVA - 60 KVA, OPTIONAL IndicatorInput/Output Voltage (OPTION: VOLTMETER, NIXIE TUBE, LED, LCD) Operating Temperature0 ~ 40 C Relative Humidity0 - 90% MAIN TECHNICAL INDEX : SERVO SYSTEM(MICROPROCESSOR CONTROL FOR LCD TYPE) Voltage Regulatotion SystemServo Motor System Input Regulation System220V+15%/-25%(160-250V), 1 Phase (100V, 110V Option) Output Voltage Regulation220V+/-3%, 1 Phase (100V, 110V Option) Frequency50 Hz +/-5% EfficiencyBetter than 95% at full load, 198-220V input voltage Electric Appliance1500v/min no flashing nor puncture Insulation Resistancemore than 2M Ohm Output Wave FormSine wave (Synchronize with input wave form) Output Wave Form DistortionNo additional distortion Harmonic DistortionLess Than 0.5% Response TimeLess than 1 second (the input votlage changed 10%) PROTECTION SYSTEM (OPTIONAL) Surge ProtectionAutomatic shutdown Overlaod ProtectionCircuit breaker or Fuse Time Delay- Short time delay: 5 seconds ± 2 seconds - Long time delay: 5 minutes ± 2 minutes Automatic Shutdown- Output voltage out of limits: 245±5V, Manual Reset - Output voltage out of limits: 185±5V, Automatic Reset - AC voltage flicker - Output Short Circuit - Phase fault - Power failure or Interruption - Power semiconductor failure OTHER Acoustic NoiseLess than 40dB Warranty periodOne year (for free) from the date of B/L. Free product accessories will be sent to you and save your maintain cost ApplicationOffice equipment, test equipment, medical equipment, industrial automation equipment, household appliance,lighting system, communication system, etc
