Shandong Factory Supply Silicone Sturctural Sealant Features 1,One component,fireproof silicone sealant,high cohesiveness,low modulus,strong movement ability 2,To be formed a kind of cold and hot resistant,non corrosion elastomer after cured,excellent weatherproof,aging resistant,UV resistant,ozone resistant and high-low temperature resistant,no pollution for environment 3,Good cohesiveness to variety of construction material,also with the functions of watertight and extensibility 4,Excellent compatibility with other silicone sealant. Application Fireproof silicone sealant is fireproof for joint filler for all kinds of construction window & door,window & door glass insulating;waterproof sealing for outside construction installation;the final decoration and sealing for variety of outdoors and indoors finishing. Precautions for Use 1,Cleaning all grease 2,Do not make skin contact with sealant long time when working.Please consult a doctor if getting into the eyes carelessly. 3,Dont suit for structural assemble application or more than 50 of the surface of base material. 4,need secondary sizing when joint width over 2cm or sizing on the foams. 5,Keep the construction places with excellent ventilation fireproof silicone sealant 6,Please keep some pressure during sizing,to ensure the joints in base material to be filled in and compacted,make the sealant can contact with base material completely.During sizing,should keep suitable sizing speed to avoid the speed too fast and produce the bubbles and holes.
Two-component silicone sealant information. Colour:A-white/B-black. Net capacity:A-190L/B-19L. Features: 1.Two-component,adjustable curing speed,fast curing in the deep,suitable for construction in the factory; 2.Neutral curing,non-corrosive to building materials such as metal and coated glass; 3.High modulus,high strengh; 4.Excellent resistance to high and low temperature.It will not become brittle,hardwn or crack at 50 after curing .It will not soften and degrade at +50,and always maintain good strengh and elasticity. 5.Good compatibility with other neutral silicone adhesives.
Material: Silicone/NBR, EPDM,SBR,NR,HNBR, FKM/FPM, polyurethane, PTFE Temperature: "NBR(-40~120°C),FFKM(-20~320°C) Viton(-20~200°C),Silicone (-70~220°C) EPDM(-50~150°C),PU(-40~90°C) Special requirements,pls specified." Feature: Resistance to high pressure, oil, weather, abrasion, solvent, high temperature, abrasion resistant, aging resistant, insulation, acid and alkaline resistant Cerfiticate: ISO 9001:2008 FDA,LFGB,ROSH,RREACH,UL Hardness: 30-90 shores A Color: Any color based on Pantone/RAL, or transparent Size: Any size, Customized and standard Cross Section E shape, D shape, Round, Square, U shape, T shape,P shape, H shape,... Customized available OEM/ODM Available,customized logo available Packing Details: "Standard packing: PP bag + carton" Customized packing as per customers' requirement Shipping "Express/Air: DHL/FedExx/UPS/TNT for small order. " Sea shipping: By sea for large quantity. Application "Available for Medical Equipment,Coffee Machine, Air and Gas Lines, Chemical Lines, Laboratory and research, Semiconductor,Protective Jacking, Water and Fluid Lines,Military,aerospace areas. food and pharmaceutical, Building, Transportation, Marine and Defence,Motor vehicles, Container Door Seals..."
Neutral transparent silicone sealant Product characteristics: 1.One-component, neutral room temperature curing, easy to use, in 4-40 ? temperature range can have good sex and thixotropy. 2.For most building materials have good cohesiveness 3.Excellent weather resistance, anti-aging, resistance to ultraviolet radiation, ozone and high and low temperature resistance, is the ideal weather resistance and sealing materials. Main function 1?all kinds of doors and windows installation gap filling sealing 2?all kinds of interior decoration caulking seal
Acrylic ab glue is a quite common used adhesive, it can stick materials of the same kind and different kinds, including steel, iron, aluminium, titanium, aba, pvc, nylon, polycarbonate, plexiglas, polyurethane, cement, china, wood, etc. It is widely used for making and repairing of automobile motorcycle, machine, channels and containers in chemical industry, carpentry and furnitures, lanterms and signboards, toys and every day articles. Features: (1) two-part, fast cure, quick set in several seconds, about one hour it can get the working strength (2) good operation, and suitable for assembly line operating (3) good bonding strength, can bond a variety of substrates, like metal, ceramics, glass, hardness plastics in electronics, etc.
Clear epoxy ab glue in syringe, cured in 5 minutes under room temperature. Good chemical resistance, rapid development of high bond strength. This waterproof and chemical resistant, clear adhesive is great for craft, household, workshop, industry & etc. ¡§c super strong and gap filling epoxy adhesive for household, workshop, industry and repairs; ¡§c waterproof and chemical resistant; ¡§c bonds most materials, especially: metal, wood, glass, ceramics, rigid plastics and concrete.
Rtv silicone gasket maker can replace rubber gasket, asbestos gasket, cork and paper gasket, it can be use for the seal of cover joint of engine, gear case and casing in automobile, motorcycle and other machinery, to the seal of various parts of machinery, the sie and shape of joint cover require no definition(sealed interval¡¨¹ 6mm). Net85g blister pack
General purpose silicone sealant is a one part, fast curing and permanently flexible silicone sealant. With excellent waterproof performance, it is also a type of anti-fungal sealant able to use in bathroom and kitchens. Excellent tensile strength and compression restoring ability. Strong adhesion to glass, pvc, ceramic, concrete, wood, metal, tiles, vinyl and most building material. Typical applications: 1 al-alloy door & window , general decoration caulking seal. 2 all kinds of glass curtain wall , aluminum-plastic plate curtain wall. 3 gusset plate doors and windows 4 laminated glass, hollow glass, mirror glass , coated glass.
Ultra-fast setting velocity cyanoacrylate that bonds acidic, insensitive surfaces and porous substrates even under low humidity condition. It is broadly applied on wood, leather, cardboard and plasticized pvc materials. Features: Super fast Strongest bonding Single component Easy to use Net: 20gm
Features: 1.One component,neutral curing,non-corrosive to metal, coated glass, marble etc. 2.Prime-less adhesion to most building materials. 3.Remains flexible over a temperature range of 4.Excellent weatherability and high resistance to ultraviolet radiation, heat and humidity, ozone and temperature extremes. 5.Good compatibility with other neutral silicone sealants. 6.The material is supplied as a paste, which cures into extremely tough elastomeric silicone rubber ensuring a durable, flexible, watertight bond upon exposure to atmospheric moisture. Main applications: 1.Sealing in joints. 2.Glazing for door and window. 3.Various interior decoration glass, aluminum, ceramic, tile, wood and metal, etc. 4.Many other uses. Limitations: 1.Can not be used in structural glazing applications. 2.Is not appropriate for all will be leaking oil, plasticizer or solvent surface. 3.Is not suitable for airtight place, because the silicone sealant need absorb air gas in the water cure. 4.Not for frost or wet surface. 5.Is not suitable for the place of continuous immersion or year-round moisture. 6.Surface temperature is not below 0¡æ or above 50 ¡æ. 7.Can not contact with strong acids or bases. 8.Cannot be used on joint which bearing structural strength or places of physical damage. 9.Has performed adhesion and compatibility tests on project substrates and all accompanying accessories. Typical properties: These values are not intended for use in preparing specifications. MethodTest ItemUnitStandard Result GB/T 13477Density g/cm3Specified value 0.1 1.3 GB/T 13477 (ISO 7390) Slump(vertical) mm ¡Ü3 0 GB/T 13477 (ISO 8394) Extrusion rate ml/min 80 380 GB/T 13477(ASTM D 2377) Tack free time h0.9 GB/T 13477 (ISO 7389) Extension recovery8088 GB/T 1347(ASTM C 794) Peel strengthN/mm1.0 1.5 GB: Chinese National Standard ASTM: American Society for Testing and Materials ISO: International Standardization Organization The GB¡± testing method is equivalent or partly equivalent to that in the Installation: 1.Surface preparation: Sealants may not adhere or maintain long-term adhesion to substrates if the surface is not prepared and cleaned properly before sealant application.Using proper materials and cleaning procedures is vital for sealant adhesion. 2.Cleaning materials:clean, fresh solvent; clean, white cloths free of lint or other lint-free wiping materials; primer (when required). 3.Cleaning procedures:Remove all loose material (such as dirt and dust), plus any oil, frost or other contaminants from the substrates to which the sealant will be adhered. Do not use detergent to clean the substrate as residue may be left on the surface. Wet one rag with solvent and wipe the surface with it, then use the second rag to wipe the wet solvent from the surface before it evaporates. Change the cleaning rags frequently, as they become soiled. If cleaned areas are again exposed to rain or contaminants, the surface must be cleaned again. 4.Primers: GP111 general purpose silicone sealant will bond to many clean surfaces without the aid of a primer. For difficult-to-bond substrates, the use of a primer or special surface preparation should be evaluated. Emergent Treatment: Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately. Shelf Life: 9 months from the manufacture date stored in cool & dry place below 27 ¡æ. Color: Clear, black, white, gray, other colours as clients¡¯ requirement. Packing: Disposable cartridges£ºnet 200ml, 225ml, 250ml, 280ml, 300ml; 24 pcs / box. Sausages£ºnet 590ml, 500ml; 20 pcs / box. LIMITED WARRANTY INFORMATION ¨C PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer¡¯s tests to ensure that Foshan Shunde Mimdy Sealant Co., Ltd.¡¯s products are safe, effective, and fully satisfactory for the intended end use. FOSHAN SHUNDE MIMDY SEALANT CO., LTD.SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. Foshan shunde mimdy sealant co., ltd. Disclaims liability for any incidental or consequential damages. Disposable cartridges£ºnet 200ml, 225ml, 250ml, 280ml, 300ml; 24 pcs / box. Sausages£ºnet 590ml, 500ml; 20 pcs / box.
Fesi 75
Features: Fire resistant sealing and filling of joints and seams or in certain areas where fire resistance is required. Fire resistant tested according to EN 1366-4 until 60 minutes in a gap of 20mm wide. Combine with Silicone Sealant until 180 minutes in a gap of 40m wide. Ensure that you choose the correct fire resistance for your application by consulting the classification and test reports.
FEATURES Waterproof and Plugging Spray is specially designed for waterproof repair products for pipe roots, nozzles, corners, cracks, slotted wiring and weak leak points in waterproof construction. It is easy to operate and suitable for painting tools that are difficult to reach narrow and complex spaces. This product is professionally designed with anti-corrosion and anti-rust functions . APPLICATION 1.Leakage plug of family toilets, kitchens, pipes, and walls. 2.Rush repair and leak plugging of building construction projects, rapid repair of roads . 3.Emergency repair and plugging of civil air defense or tunnel engineering . 4.Quick repair of prefabricated components in prefabricated pipe component factories . 5.Emergency repair and water supply engineering of pipe joints of water supply companies . 6.Leakage plug of building floor, basement and other building projects.
TOPSEN 793 Weatherproof Sealants Application: sealing and bonding for aluminimum windows and doors. OH Polymer: 26% Service life guarantee: 3 yrs minimum Gross Weight: 480g/300ml (bottle) Notes: 1. Bottle weight is 70g. 2. Sausage type avaliable. 3. Shore A for neutral type is 46-60. 4. We could provide 2 FREE samples for each type.
Butyl Caulk Sealant is a neutral sealant compose of single butyl rubber with excellent properties of anti-aging/corrosion/oxidation, water resistance, tightness; wide range stretch of deformation and crack especially under low temperature circumstance. Application: Applies to all kinds of seams, holes and cracks in steel roofs; sun panels; windows and doors.It is also used widely for the car industry. Tech Data: Solid: 83% Gravity: 1.4 0.1g/cm3 Service Temperature: -40 to 180 Lifetime: 20 years Viscosity: 1800 300 dpa.s UV Resistance: 2000 hours Size: 300mL/cartridge or 25kg/drum
Model number 930 Market Application 1.All kinds of doors and windows installed caulking sealing; 2.Various types of indoor and outdoor glass decoration, bonding and sealing of cabinet projects; 3.Installation and waterproof sealing of various kitchens and sanitary ware; 4.Bonding and sealing of other general building materials Product Feature 1.One-component, neutral ketoxime type, room temperature curing; 2.Good weather resistance and water resistance; 3.Excellent adhesion, good compatibility with common substrates Package: n.w.190kg/drum Delivery: within 1-3 weeks
The appearance of product: common standard colors of transparent and porcelain white The main market application: ---All kinds of doors and windows installed caulking sealing; ---Interior decoration caulking and sealing; ---Installation and waterproof sealing of various kitchens and sanitary ware; ---Bonding and sealing of other general building materials The package : n.w.190kg/drum The delivery : within 1-3 weeks
Neutral silicone sealant:93-5,915,930,940 Acid silicone sealant:73-5,715,730,740 Product application: 1.Large plate glass assembly project, structural bonding assembly of roof sun panels and various ---process glass; 2.Structural assembly of point type and fully transparent glass curtain walls; 3.Bonding and assembly of various large fish tanks; 4.Bonding and sealing of various glass assembly projects; 5.All kinds of doors and windows installed caulking sealing; 6.Various types of indoor and outdoor glass decoration, bonding and sealing of cabinet projects; 7.Installation and waterproof sealing of various kitchens and sanitary ware; 8.Bonding and sealing of other general building materials
300ml cartridge, 24 cartridges/carton 1950 cartons/20'GP without pallets, 1600 cartons/20'GP, 80 cartons/pallet 590ml sausage, 20 sausages/carton 1100 cartons/20'GP 200L drum 75 drums/20'GP
Neutral silicone sealant; Weatherproof sealing; structure use; Drum package,cartridge package,sausgea package; factory price
