Powder Glue, construction adhesive heat resistant tile adhesive Porcelain Tile Adhesive is also known as the ceramic tile or ceramic tile adhesive glue, points type, polymer type, heavy brick, is a newly developed products, mainly used for stickup ceramic tile, brick, tile and other decorative materials, widely used in internal and external walls, floor, bathroom, kitchen, and other places of building the veneer of decoration. 1.Product Description: Product Name : BE GOOD Strong Adhesion� Tile Adhesive Type : Strong Adhesion Type Color : Grey / White Package : 20kg/bag Application : Tile Adhesive Reference Usage : 2-5kg/ m Mixing Ratio Powder : Water = 20kg : 5 liters Pot Life : 4 hours Application Temperature : 5 - 40 Packaging Details: 20kg/bag / 72bags/pallet / 20pallets/20GP /1360 bags/1*20GP Payment: TT Delivery date: 10 to 15 working days. Original country: China 2. Features 1) Strong adhesion and elasticity. 2) Pasting layer is thin and even, and hardly with hollowness. 3) Easy and simple application, no need to pre-moisturize the bricks and walls. 4) Excellent waterproofing performance. Adoption of scraper method will speed up the tiling. 3. Application Range 1) Suitable for interior and exterior use.� 2) Suitable for substrate made from concrete, masonry, pre-cast material and lightweight brick. 3) Suitable for walls, floors and roofs of architects, such as tunnels, bridges, basement, kitchen, bathroom, balcony, swimming pool and reservoir and so on. 4) Suitable for architects with structure which might easily vibrate and split, such� as post-cast strip, pipe orifice.
CHIPKO SW is a fast drying Water based adhesive which has excellent bonding properties and ability to give brilliant tensile properties in its bond made with the substrates. Product has long shelf life and high ease of application. The product has good drying speed and gives excellent coverage. It is perfect to bond wooden laminates to wood, wood to wood and other wooden applications where high quality performance and good working cost is the key. Application CHIPKO SW can be applied using hand roller, glue applicator, hand comb applicator etc. A consistent fine coat and care while application will give best possible results in terms of coverage and faster drying. Usage and storage condition CHIPKO SW has an adequate antimicrobial dosage to prevent the microbial contamination during the shelf-life and has a shelf-life of 12 months starting from the date of receipt if it stored in the original/unopened containers at temperature between 5 and 40 C. The opened containers should be kept away from heat sources and direct sunlight. Open containers should be have their lids tightened when not in use.
1) Label Adhesive for coating of face stock materials such as (Paper, PET, PE, Foil). 2) Tape Adhesive for coating on BOPP, double sided tape, medical coating, band-aids. 3) DIY floor adhesive for PVC floors. 4) Shoe Adhesive hot melt used for stitching 5) Bookbinding hot melt used for spine bonding. 6) Woodworking hot melt used for profile wrapping, panel assembly and edge banding. 7) Non-woven hot melt used for diaper construction, positioning and elastic 0.5kg/cake, 8kg/carton Flaky particles, 25kg/bag 180kg/steel drum
URJA WATER BASE DUCT SEALANT is a fast setting, elastomeric water base joint sealant for low medium & high velocity heating & air conditioning ducts. It has very good adhesion to galvanize, aluminum or mild steel metal ducts. It gives good flexible seal against air leakages and do not require reinforcing tapes or mechanical fasteners. URJA WATER BASE DUCT SEALANT is suitable for Cleanroom and Pharmaceutical Projects. It passes the Flammability test as per UL94 HB class test when tested at ARAI, lab, Pune. Also it is food grade material when tested as per IS & USFDA test method at FOOD HYGENE & HEALTH LABORATORY.
Nexo Seal General Purpose Rubber Sealant 260ml
Nexo Seal General Purpose Rubber Sealant 300ml
Nexo Seal Premium Grade Acetoxy Clear Sealant 300ml
Nexo Seal General Purpose Rubber Sealant 300ml
Tile Adhesive
Rhino Tech A two part screen adhesive for synthetic mesh to wood or metal frames Application : Suitable for Wood,Metal, Alluminium Frames Packing : 900gms Std Packing : 9/18 units (for 900gms)
Shebro - India Pure Photopolymer Emulsion Description : Very high viscosity of about 10,000 cps allows wating thickness of 100-150 microns with just 3-4 coats on the screen. Usable for both, high density textile and UV printing. Pre-Sensitized Shelf Life : 1 Year Colour : Red Packing : 900gms/3.6kgs Solid Content : 41% Std Packing : 9 units (for 900gms) Std Packing : 4 units (for 3.6kgs)
Chromaline - U.S.A For Plastisol inks Discription : Photoemulsion intended for use with plastisol inks only. This high-quality, yet economical emulsion reaches exposure speeds of many dual cure systems. Its high viscosity won't sag in low mesh counts yet Its rheology behavior Allows high stencil Buildup with minimal coatings. Colour : Violet Packing : 900gms+2.8gms Diazo / 3600gms+11.2gms Diazo Solid Content : 44% Std Packing : 9/18 units (for 900gms) Std Packing : 9/18 units (for 3.6gms)
Shebro - India A biodegradable and non-abrasive emulsion Discription : A biodegradable and non-abrasive emulsion treatement that creates a permanent stencil. improves stencil durability. Suitable for nylon/polyester/steel mesh. Colour : Clear Packing : Set of 1800gms Std Packing : 12 set (for 1800gms)
Water proffing for protect Starch Bonding. Packex CR-20 is a thermosetting ketone aldehyde starch based corrugating adhensive. It features a specific blend of proprietary corrugator performance enhancing ingredients
* substitute of 'LOCTITE 401' * EU RoHS compliant product * Non-solvent : Does not contain organic solvents and does not cause hallucinatory effects. Suitable for use in various work environments. * Cures at room temperature (20C to 30C) and does not require special curing equipment. * Fast curing that bonds in seconds. Reduces job completion time and facilitates automatic production lines. * Transparent and low odor. Works well with any use and material to give a clean finish. * Viscosity (cps) : 90~110 / Tensil-Shear Strength : Above 180 / Initial Cure Speed : 3~5 / Working Temperature : -54~82C
The heating apply one-part adhesive and sealant for interior and exterior application,remain permanent flexibility and good weather properties. It is ideal for use sealing gaps of containers, automotives, buildings and various appliances.
one-part sealant for interior and exterior application,remain permanent flexibility and good weather properties. It is ideal for use sealing gaps of containers, automotives, buildings, color steel plate, roof sealing and various appliances.
SPECIFICATION:90mm*5mm*5mm PACKAGING TERMS: 1000PCS/BAG
Hot melt glue for book binding Paper weight: 60-120gram HM8030 120-157gram HM8030W ï¼?157 gram HM 8216 It's designed for use in bookbinding side gluing for meidum to high speed perfect binding line or standalone rotary binder, it is formulated with good adhesion and thermal stability, long open time and good flow property, light clear yellowish abd is suitable for bonding printed, varnished or BOPP laminated paper.
RAPPORT RP-6210 Hybrid Sealant is based on the hybrid silicone polymer one-component adhesive. It react with moisture in the air, and gradually formed a kind of high strength of the elastomer. RAPPORT RP-6210 Hybrid Sealant is a universal sealant, with higher adhesion property and better elastic recovery rate. It is suitable for all kinds of porosity and porous material. RAPPORT RP-6210 Hybrid Sealant Sealant has good adhesion, and has significant characteristics in coating the paint. Features: One component, easy to use Excellent adhesive performance Odorless, non-corrosive Excelent flexible Water resistant Widely use Paintable Technical Data: As Supplied tested at 23�2, RH50%�5%: Aspect:Thixotropic Paste Odor:Low odor Specific Gravity:1.5 Skinning Time, min:20 105 heat loss%:1.7 Application Temperature, :+5 to +45 Service Temperature-40 to +80 As Cured tested at 232, RH50%5% : Movement Capability Level, %20 Hardness Shore A.7d:55 Adhesion Propertiesnon-destruction Tensile modulus(MAX), MPa1.5 Elongation at break, %350 Typical Application: Suitable for various substrate seam sealing, including stainless steel, sheet, copper, wood, coating, etc, with the function of waterproof anti-corrosion sealing seal inside and outside. Suitable for is suitable for sealing, seam sealing, simple bonding as well as for vibration reduction and sound dampening measures in collision repair and vehicle body construction. Suitable for the interface of anticorrosion seal in areas of rivet, bolt, hinge, weld. Suitable for all kinds of anti-water sealing of the gaps of metal structure, fume hood, houses built. Instructions for Use: APPLICATION TEMPERATURE: +5 to +45 1. Cleanse with a cleaning agent, to keep the substrate surfaces completely cleanJOIN LEADER also provide the cleaning agent for your convenience 2. Use the sealant after cleaning agent dries, around 1~2mins later. You can use two different cloth, one for cleaning agent, and the other for sealant. Notice that the two cant be mixed use together, and the second cloth will be better purified cotton and no picking. 3. For better appearance, cover outside of joint areas with masking taps before application. 4. Cut nozzle to desired size and extrude sealant to joint areas. Tool immediately after sealant application, make it smooth and remove masking tape before sealant skins. Color: White, Grey, etc. Other Color Available Package: Cartridges: 250mL, 300mL, Sausage: 300mL, 600mL Different Packing Available
