We're Chinese factory,We export ourselves.Our main products are mixers,agitators,tanks,reactors,dryers and etc.We export to Asia,Southeast Asia and some European countries,If you have this demand. Pls contact with us.We'll get you know our strength.
PE Pontoon.
Floating Piers.
Model: 30 HP Two Stroke Inline Model Number: E30DRG Series: E-TEC HP: 30 Engine Type: Inline 2-Cylinder E-TEC DI Displacement: 35.2 cu in/577 cc Bore x Stroke: 2.992 x 2.5 in / 76 x 64 mm Prop Shaft Horsepower: 30 HP (22 kw) @ 5500 RPM Fuel/Induction System: E-TEC DI w/ Stratified low RPM combustion mode Alternator Output: 56 Amps Total Output/ 15 Amps Net Dedicated Starting System: Rope Steering: Tiller Lubrication: Multi-point, targeted oiling Full Throttle RPM Range: 5500-6000 RPM Recommended Engine Oil: Evinrude/Johnson XD100 Oil Recommended Fuel: Regular Unleaded Gasoline (87 Octane) Gear Ratio: 2.15 Shaft Length: 15" C.A.R.B. Rating: 3-Star U.S EPA, European Union Dry Weight: 146 lbs. Rotation: Standard (Right) Power Trim & Tilt: No
New/Used Yamahas 200HP 4-stroke outboard motor The outboard motor comes with all accessories such as gauge, remote, control, cable and propeller. The engine also comes with 2 years international warranty.
New/Used Yamahas 40HP 4-stroke outboard motor The outboard motor comes with all accessories such as gauge, remote, control, cable and propeller. The engine also comes with 2 years international warranty.
New/Used Yamahas 350HP 4-stroke outboard motor. The outboard motor comes with all accessories such as gauge, remote, control, cable and propeller. The engine also comes with 2 years international warranty.
Marine Engine Spare Parts.
CU1/CU3 Bronze Propeller size from 600mm to 6000mm dia are customize according to the vsl Engine Power and Gear box ratio. Our propeller are well known as high efficiency and stablility with CCS, BV,DNL,GL, ABS,RINA....certificates. We have more than 40-years experience in designing, developing, and producing marine propellers with advanced technology, strong technical force, complete detection means, trusty quality control system and reliable physical and chemical testing equipment at furnace. We can make all sorts of Fixed-pith Propeller, Controllable Pitch Propeller and other non-ferrous alloy casting products. Our first-class products, perfect after-sales service, gained us a good reputation at home and abroad. Our main products: All types of copper propellers with the diameter below 6m; High peed yachts and lifeboats propellers, various non-ferrous alloy productions, such as Copper Sleeves, Bearing Shell, Anti-corrosive Zinc Slab and so on. All the products are selling good in coastal cities of China and also in Singapore, Taiwan, U.S.A, Germany and as well other countries. Our factory had certified by CCS, Zhejiang Vessel Inspection Bureau and Register of Fishing Vessel of PRC continuously for last 20 years. We also had Certified by the ISO9001:2000 Quality and Management System in 2006. Price term can be FOB any China port or CNF any port by clients prefer.
Search and Rescue Radar Transponder SART Model: TBR-600C Product Overview: Search and rescue radar transponder (SART) is the positioner of global maritime distress and safety system (GMDSS). Performance indicators of the product meet relevant international standards. It possesses independent intellectual property right and has obtained the model approval from China Classification Society (CCS) (certificate number: CQ08T00015). Function and Purpose: It is capable of detecting the pulse action through the navigation radar installed on a search and rescue vessel or a helicopter. The signal from SART can indicate exact position of the SART on the fluorescent screen of navigation radar of the search and rescue vessel of the helicopter. The survivor who holds a SART or a ship or boat in distress where a SART is equipped can discover the search and rescue vessel or helicopter that is approaching them. Technical Indicators: Signal: Frequency range: 9,200MHz -9,500MHz. Polarization: horizontal polarization. Antenna: horizontal beam (omnidirectional)
Refractory anchors and related materials are used for anchoring and assembling refractory ceramic fibre linings or for reinforcing monolithic linings of castables, plastics or ramming mixes. We carry a complete selection of refractory anchors. We can supply you with refractory anchors to suit any depth of lining. Our refractory anchor selection includes studs, V-clips, C-clips, and miscellaneous parts. They are available in various grades of stainless steel including SUS304, SUS310, SUS316, SUS320 and Inconel 601, and in higher alloys which provide good oxidation and scaling resistance at elevated temperatures. Refractory Anchors are manufactured to suit any depth of lining and can be tailored to meet customers individual requirements. Cast-in Anchors Y Anchors Manufactured from 5-20mm diameter bar or from plate section. Y anchors can be supplied opened to any angle. V Anchors Manufactured from 5-20mm diameter bar. Anchor legs can be supplied to individual requirements. Crook Anchors Manufactured from 5-16mm diameter bar. The crook is available with a span of 75mm, 100mm, or 125mm. Brick Anchors Brick Anchors can be designed to customers specifications to suit any furnace brick. The range includes brick hooks, C-clips and scissor clips. Bespoke Anchors Bespoke refractory anchors can be made to order, including two part anchors and fixings with multiple anchor legs. Mesh Anchors A mesh fixing is available for retaining mesh lining. The fixing is supplied open, and is welded to the furnace lining.
AirOxi has come up with its new product Aire-O2 Series II sub-aquatic aerator specially designed for uniform oxygen dissolve at pond bottom. It operates by creating a partial vacuum under the water, drawing air through the shaft and dispersing it into the water in a horizontal direction. As the propeller rotates, it induces a flow of atmospheric air through the air intake ports on the shaft located above the water surface. This air is then drawn through the channel, past the propeller, and exits in a high velocity stream of fine bubbles as it is diffused into the water.
marine water lubrication stern shaft (stern tube) sealing apparatus is suitable for kinds of ships, which are with water lubrication stern tube bearing. There is pneumatic seal, so that it can be inspected, adjusted, and maintained without docking.
The marine rudder is a main part of the steering system for vessels. The whole rudder system includes rudder blade, rudder carrier, rudder pintle, rudder stock, etc. We can design different types of the rudders as the requirement of our clients.
Material:stainless steel,forged steel and so on The accessories of shaft propusion system The marine shaft system is a main part of the steering system for vessels. The whole shaft system includes propeller, stern tube, bearing, hydraulic coupling, middle bearing, hydraulic nut, nozzle, stern tube seal, ,tail shaft, etc.
Shafting grounding device application While the propeller shaft rotates,the lube oil film is formed at the bearing portions such as intermediate shaft,etc,.with a great difference of potential appearing between proller shaft and hull.This difference of potential constitutes a treat cause to the occurrence of electrolytic corrosion in propeller wing,propeller shaftmpropeller shaft sleeve and so on. shafting grounding device Characters: Propeller shaft grounding Ass'y is the system to minimize the difference of potential between propeller shaft&hull with two netals electrically connected all the time. This equipment can be assembled shaft diameter range 100mm-900mmï¼?special specification according to the specification according to the specification given by the user design
Matsutec Class B AIS Transponder Model: HA-102 FEATURES Electrical function is accordance with IEC 62297-1 Dual Channel function: Two TDMA receivers ar receiving datum in two independent channels at the same time, and one TDMA transmitter is transmitting in two independent channels alternately. CSTDMA function can avoid and solve communication conflict. Transponder has external serial data interface(RS-422, RS-232). Transmit and reciever safety message, and equipped with "SOS" safety button. Support three operation mode: Carrier-sense mode, assigned mode and polled mode. Internal GPS reciever, as data source for position, COG and SOG can be connected to all devices compatible to GPS and PC, PDA, ECDIS, RADAR, etc. Alarm and indication (via LED) for power , error, time-out, status. Specifications STANDARDS IEC 62297-1 IEC 61162-1 IEC 60945-2002 VHF RECEIVER Frequency Range 156.025MHZ ~ 162.025 MHZ Channel Bandwidth 25 KHZ Number of AIS Receivers 2 Receiver ( one time shared between AIS/DSC ) / 1 Transmitter CH-1 Default CH 87B ( 161.975 MHZ ) CH-2 Default CH 88B ( 162.025 MHZ ) Number of DSC Receiver 1 ( CH 70) RX DSC 156.525 MHZ Max. Usable Sensitivity PER less 20% at -107dBm VHF TRANSMITTER Power Output 2 Watt ( 33 dBm ±1.5dB ) Modulation GMSK / FM Data Rate 9.6K dps / per channel Modulation Spectrum IEC 62287 DSC RECEIVER Modulation 1300 HZ / 2100 Hz FSK Data Rate 1200 bps ± 30 ppm Spurious Response Rejection Over 70dB for Signal @ -104dBm; BER less 1% Blocking More 84dB for Signal @ -104dBm; BER less 1% GPS RECEIVER Receiving Channels 12 Channels Acquisition Sensitivity -140dBm Tracking Sensitivity -150 dBm Position Accuracy < 2.5m CEP ( GPS ) without SA Output Rate 1 Hz POWER SUPPLY Supply Voltage 12V DC ( 10V ~ 20V ) Power Consumption Less than 10W MAIN UNIT 4 LED Indicator Working Status 1 ON/OFF Switcher INTERFACE Ports NMEA 0183 / RS-422 / RS-232 GPS Antenna ( Optional ) Female TNC Connector VHF Antenna ( Optional ) Female Type M Connector ( Type N Connector optional ) ENVIROMENT Operating Temperature Antenna : -25 ~ 70 C Celcius Others : -15 ~ 55 C Celcius Storage Temperature -25 ~ 70 C Celcius Humidity Operating: 0 ~ 95 RH at 40 C Celcius GPS Antenna operating : 100% Hermetically sealed VHF Antenna operating : 100% Hermetically sealed Vibration IEC 60945 Waterproof IPX5 PHYSICAL Size in mm ( W ) 234mm Size in mm ( H ) 40mm Size in mm ( D ) 167mm Weight
BRIEF The ISATDOCK2 enables the Isatphone 2 to be always on and ready for service (Call and Receiver). The Isatphone 2 handset features include phone charging management, USB data port, inbuilt ringer and allows antenna and power to be permanently connected to the dock ready for use. APPLICATION Keep satellite signal on status whenever and wherever on the global . Avoid miss incoming call, and call out satellite phone in your drive room or office. In remote areas also let Isatphone 2 have good receiving ability. FEATURES Quickly searching satellite and GPS Position Charging control switch and LED indicator for battery charging status High signal receive ability by marine active antenna Inbuilt Hands-free speaker phone USB Data access High quality ABS plastic Wall or desk mounting options Integrated Antenna design SPECIFICATION: POWER 9~36V DC input lead AC/DC adaptor (Optional) ANTENNA WORK FREQUENCY Inmarsat Receiver: 1525.0 to 1559.0 MHZ, 1575.42+/- 10.25MHZ (GPS L1 ) Inmarsat Transmit: 1626.5 to 1660.5 MHZ Antenna Description: Type marinetime POWER CONSUMPTION Charging: 500mA, 6W Sleep mode: 5mA, 60mW PHYSICAL Dimensions: 219 x 166 x 85 mm Weight â?? dock: 0.687g ENVIRONMENT Operating Range: -30 C to +80 C Storage: -35 C to +85 C Battery Charging Temp.: 0 C to +45 C Operating Humidity Range: 95% at 40 C Storage Humidity Range: 95% at 45 C IN THE BOX 1. ISATDOCK2 main unit x 1 2. Privacy handset x 1 3. DC Power Cable / Lead x 1 4. Active Satellite Antenna x 1 5. Satellite Antenna Mounting bracket x 2 6. 5M/10M Antenna Cable x 1 7. User manual x 1
Item No tail shafts Materials iron,aluminum,steel,copper,plastic,carbon steel,nylon,bronze,soldder alloy,HSS,tool steels or as per your requirements Dimensions according to your requirements Surface Treatment heat treatment,polishing,PVD/CVD coating,galvanized,electroplating,spraying, painting and so on Processing Equipments CNC machining center,CNC lathe,grinding machine,automatic lathe machine,conventioal lathe machine,milling machine,drilling machine,EDM,wire-cutting machine,CNC bending machine etc. Testing Machine digital height gauge,caliper,coordinate measuring machine,projection machine,roughness tester,hardness tester and so on
Matsutec HP-33A 4.3" color LCD diaply AIS transponder combo with GPS navigator The HP-33A is a class B AIS transponder for Non-SOLAS vessels such as pleasurecraft, work-boat, fishing boat etc small boat. Special design Watching dispaly to monitor Fishing net buoy, friendly ships etc. External Alarm for MOB and Collision-Risk management. Feature To AIS 1. Detail Target list and Radar overview 2. Watching disaply to monitor important subject, example: Fihsing net buoy, Friend ship etc 3. External Alarm (Buzzer) 4. Low cost, reduced size and easy installation make the HP-33A ideal to meet your budgets and demands of owners and vessel operators To GPS 1. 4.3" Sunlight Viewvable color LCD (Brightness: 500 cd) 2. GOTO track navigation 3. Stores up to 10,000 marks/ waypoints, 100 routes and 3,000 track points 4. Delicated Man Over Board Button (MOB) 5. Support NMEA 0183 ver 2.0 6. 7 display modes available, including 2 user-customized modes 7. SBAS capable for better measurement Equipment list ( standard): 1. Dispaly unit HP-33 2. Antenna unit HA-017 with cable 10m 3. Power canle, 2m 4. Standard spare parts and installation material 5. Operator manual
