ITO GLOBAL GROUP. Sale offer export / Best quality of Ms. steel skulls/ CI Skulls. As per below specification report. Fe-85-90% C-2.5-% S-.031-& P-0.21-% Material size small and large .
APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.
This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites. Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature. Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts. PREPARATION OF FURANE MORTAR : Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life. Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.
Fuel ethanol alcohol process plant ,Ethanol replaces fuel oil to reduce pollution and protect the earth! we offer turnkey project fuel ethanol alcohol process line and by -product process machine which have waste water treatment, feeding /Organic fertilizer/biogas power generator and so on from 5000L -600000L capacity,design according to customer raw materils ,offer installtaion commissioning training after-sale service for customer ! welcome cooperate!
Fuel ethanol alcohol process plant ,Ethanol replaces fuel oil to reduce pollution and protect the earth! we offer turnkey project fuel ethanol alcohol process line and by -product process machine which have waste water treatment, feeding /Organic fertilizer/biogas power generator and so on from 5000L -600000L capacity,design according to customer raw materils ,offer installtaion commissioning training after-sale service for customer ! welcome cooperate! Need customer tell us what are your raw materil to produce ethanol/alcohol ? how many capacity per day from your raw materil or how many capacity ethanol /alcohol you want to produce ? which kind ethanol/alcohol : food type,fuel type ,medical type ,industry type are different thanks. welcome cooperate!
Corn grain Fuel ethanol alcohol process plant ,Ethanol replaces fuel oil to reduce pollution and protect the earth! we offer turnkey project fuel ethanol alcohol process line and by -product process machine which have waste water treatment, feeding /Organic fertilizer/biogas power generator and so on from 5000L -600000L capacity,design according to customer raw materils ,offer installtaion commissioning training after-sale service for customer ! welcome cooperate! Need customer tell us what are your raw materil to produce ethanol/alcohol ? how many capacity per day from your raw materil or how many capacity ethanol /alcohol you want to produce ? which kind ethanol/alcohol : food type,fuel type ,medical type ,industry type are different thanks. #ethanolalcoholprocessplant #fuelethanolplant #medicalethanolplant #foodethanolplant #productionline #machine #equipment welcome cooperate!
14.1 inch Capacitive Touch Screen Dual Display POS System All in one Cash register with 80mm thermal printer. Quick Details Products Status: Stock Type: Android/Linux POS Device with Printer Style: Desktop Use: POS device and Casn Register Interface Type: Micro USB and SIM Card Model Number: HDD-680 Place of Origin: China Warranty(Year): 1-Year After-sales Service: Others, Call Center and on-line Technical Support Screen size: 12/14inch Touch Screen: 10 Points Capacitive Touch ScreenV Customer display: 14.1 inch/12 inch/LED/VFD220 Color: Gray Card Reader: Magnetic optional Wireless: BT 4.0 Interface: USB/RS232/VGA/Audio/Keyboard Power Supply: 12V/2A Memory: 2GB RAM Certification: FCC, ce, RoHS
14.1 inch Capacitive Touch Screen Dual Display POS System All in one Cash register with 80mm thermal printer. Quick Details Products Status: Stock Type: Android/Linux POS Device with Printer Style: Desktop Use: POS device and Casn Register Interface Type: Micro USB and SIM Card Model Number: HDD-680 Place of Origin: China Warranty(Year): 1-Year After-sales Service: Others, Call Center and on-line Technical Support Screen size: 12/14inch Touch Screen: 10 Points Capacitive Touch ScreenV Customer display: 14.1 inch/12 inch/LED/VFD220 Color: Gray Card Reader: Magnetic optional Wireless: BT 4.0 Interface: USB/RS232/VGA/Audio/Keyboard Power Supply: 12V/2A Memory: 2GB RAM Certification: FCC, ce, RoHS
14.1 inch Capacitive Touch Screen Dual Display POS System All in one Cash register with 80mm thermal printer. Quick Details Products Status: Stock Type: Android/Linux POS Device with Printer Style: Desktop Use: POS device and Casn Register Interface Type: Micro USB and SIM Card Model Number: HDD-680 Place of Origin: China Warranty(Year): 1-Year After-sales Service: Others, Call Center and on-line Technical Support Screen size: 12/14inch Touch Screen: 10 Points Capacitive Touch ScreenV Customer display: 14.1 inch/12 inch/LED/VFD220 Color: Gray Card Reader: Magnetic optional Wireless: BT 4.0 Interface: USB/RS232/VGA/Audio/Keyboard Power Supply: 12V/2A Memory: 2GB RAM Certification: FCC, ce, RoHS
14.1 inch Capacitive Touch Screen Dual Display POS System All in one Cash register with 80mm thermal printer. Quick Details Products Status: Stock Type: Android/Linux POS Device with Printer Style: Desktop Use: POS device and Casn Register Interface Type: Micro USB and SIM Card Model Number: HDD-680 Place of Origin: China Warranty(Year): 1-Year After-sales Service: Others, Call Center and on-line Technical Support Screen size: 12/14inch Touch Screen: 10 Points Capacitive Touch ScreenV Customer display: 14.1 inch/12 inch/LED/VFD220 Color: Gray Card Reader: Magnetic optional Wireless: BT 4.0 Interface: USB/RS232/VGA/Audio/Keyboard Power Supply: 12V/2A Memory: 2GB RAM Certification: FCC, ce, RoHS
