Apply to Marine : Fishing boat, Leisure boat, Cruise Industrial : Water Pump, Sand Pump Standard supply Mechanical control valve Cable bracket/clamp parts. Oil cooler/cover Companion flange/reamer bolts Bell housing (Selection) Rubber block coupling (Selection) Features Marine reduction gearbox with hydraulic clutch. Suitable for twin engines with the same reduction ratio as forward/reverse. Design and strict quality management according to ISO9001 standards. Use of seawater-resistant castings. Quiet operation with precise gearing. Tapered roller bearing application considering maximum thrust. Compact design, minimal appearance in its class. Permanently available oil filter (metal) applied. GO HOME (emergency bolt application) function. Options Electric control valve (12V, 24V optional) Mechanical trolling valve Mounting brackets (flat type, customised) Class
Key features Same rotation of output/input Live pulley provided (9, C type, 3 grooves) Versatility of Output Types Attachable to both the front (pulley) and rear (bell housing) sides of the engine Directly attachable with pump pad Monitoring function to see the rotation provided when you choose pump as the output type SAE C D pumps are available (if required, needs processing). SAE C D adaptor provided Pressure gauge provided as standard Application Propulsion device of stern drive Clutch for powertrain Drive for hydraulic devices or accessories Diesel power unit system
Key features Live PTO equipped PTO Capacity: 100 hp/1800 rpm (DMT95H), 150 hp/1800 rpm (DMTP5100, DMT220DL, DMTP6500, DMT400H, DMT400HL) Able to take off power from transmission Suitable for free-standing design Drive for steering system/hydraulic pump Apply to Fit to aluminium boat/free-standing design
Used MTU Amrine Engine of The specification: Type: 20V538TB91 Rated Power: 3300 kW Speed at Rated Power: 1900 RPM Number of Cylinders: 20 Bore: 185 mm Stroke: 200 mm Total Displacement: 107.5 liters Fuel Consumption: 1150 liters/hour Dimensions (L x W x H): 3790 x 1640 x 2505 mm Weight: 9080kg 2units
The Mercury Verado 250 is a high-performance outboard motor known for its power and reliability. Here are some key specifications: Engine Type: 4.6L V8 Horsepower: 250 hp Steering: Digital Throttle & Shift (DTS) Starter: Electric Shaft Length: Available in 25" (X-Long) and 30" (XX-Long) Power Trim & Tilt: Yes Fuel System: Electronic Fuel Injection (EFI) Alternator: 115-amp Weight: Approximately 600 lbs (272 kg) Cooling System: Water-cooled with thermostat & pressure-controlled The Verado 250 also features the Advanced MidSection (AMS) for reduced vibration and noise, and Adaptive Speed Control (ASC) for maintaining engine RPM despite changes in load or conditions12.
The Volvo Penta TAMD41M-A is a reliable and powerful marine diesel engine. Here are some key specifications and features: Engine Type: 6-cylinder, 4-stroke, direct-injected, turbo-charged marine diesel engine with aftercooler1. Power Output: 147 kW (200 hp)1. Cooling System: Freshwater cooled exhaust manifold and oil cooler1. Alternator: 14 V/50 A1. Other Features: Flexible front engine mounting, wet type exhaust elbow, lubrication oil filter, and turbo-charger
We have a great range of new and used marine accessories. We are also main dealers for outboard engines . Outboard Services and Marine Ltd are based on the south coast of Cornwall. We have a great range of new and used marine accessories. We are also main dealers for outboard engines, OUTBOARD BOAT ENGINE WHOLESALE We got OUTBOARD MOTOR ENGINES for sale at VERY VERY CHEAP affordable prices. Varieties of them. WE ARE SUPPLIERS OF HIGH QUALITY OUTBOARD ENGINES BOTH USED AND NEW. EXTREME OFFSHORE PERFORMANCE AND DURABILITYâ??NOT TO MENTION STRIKING GOOD LOOKS. item value Condition New Engine 4 Stroke Fuel Type Gasoline Cylinders 6 Engine Position OUTBOARD Dimensions (L x W x H) (mm) 1266 x 729 x 1179 Brand Name Outboard Engine Boat Motor Model Number Outboard Engine Boat Motor Engine type 4 Stoke Product Name Outboard 4 Stroke Displacement 52cc Starting system Manual Warranty 1 Year Type 4 Stroke Model Control System Tiller Control Color Black Application Marine SHIP Engine Model CM6D28C engines, OUTBOARD BOAT ENGINE WHOLESALE, We got OUTBOARD MOTOR ENGINES for sale at VERY VERY CHEAP affordable prices. Varieties of them. WE ARE SUPPLIERS OF HIGH QUALITY OUTBOARD ENGINES BOTH USED AND NEW. EXTREME OFFSHORE PERFORMANCE AND DURABILITYâ??NOT TO MENTION STRIKING GOOD LOOKS. OUTBOARD 4 STROKE Mileage one to two hours used Fuel Gasoline and Diesel Gears Manual and Authomatic Engine 4,6 and 8 Shaft long shaft 25 Colour gray and white Colour Choice of colours
Have 3 Chemical & Oil Tanker available for Time Charter in Nov/Dec. [1] Length : 175.960m Breadth 31.000m / Draft 11.100m / M.E Power 8561KW / Reg Vietnamese Flagged Ship / DW 40058.00 / 25400 GT / 9950 NT / Year Of Building 2004 / Place Of Build Korea. [2] Length : 144.00m Breadth 23.000m / Draft 8.800m / M.E Power 4440 KW / Reg Vietnamese Flagged Ship / DW 16500.00 / 11271 GT / 4986 NT / Year Of Building 2011 / Place Of Build China. [3] Length : 104.610m Breadth 16.200m / Draft 6.200m / M.E Power 3299 HP / Reg Vietnamese Flagged Ship / DW 4813.600 / 3231 GT / 1649 NT / Year Of Building 2006 / Place Of Build Hai Phong - VN.
Can supply all kinds of marine cranes, including: 1) hydraulic slewing deck crane, twin deck crane, marine electrical/hydraulic cargo crane, telescopic boom crane, provision crane, hose handling crane, fuel hose crane, cantilever crane, wire luffing crane, cylinder luffing crane, electric jib crane, hydraulic folding crane, hydraulic knuckle/telescopic crane, hydraulic telescope crane, travel crane, engine room overhead crane 2) suez canal search light davit, movng sludge knock-down davit, pneumatic pump room davit, electric fuel oil hose crane 3) single arm rescue boat/liferaft davit, platform type davit, gravity luffing type davit, prvision crane and davit etc. Ccs, nk, lrs, gl, dnv, abs certificate can be provided. Please feel free to contact with us freely for your inquiry:
1: 2nosx 3 in 1 dredgers 2: All 2 vessel in Singapore flag 3: price: SGD2.5mill each 4: location singapore waters.
We, jingjiang top far international trading co., ltd, can supply kinds of launching appliance for lifeboat.Such as: 1. Launching appliance for free fall lifeboat, max working load from 55kn to 65kn., hoisting speed more than 3.0m/min, slide angle 35° 2. Launching appliance for totally enclosed lifeboat, max working load from 55kn to 110kn, hoisting speed more than 10m/min, lowing speed from 90-120m/min 3. Launching appliance for oil platform lifeboat, max working load from 85kn to 138kn, hoisting speed more than 5m/min, lowing speed from 40-60m/min 4. Launching appliance for rescue boat, max working load from 21kn to 30kn.Hoisting speed more than 18m/min, lowering speed 40-60m/min, slewing platform 3.5-5.0m
Supply marine stern roller We can supply marine stern roller with lr, dnv, , abs, nk, bv, rina, kr, ccs certificate etc as per customerâ??s request and drawings. 1) type: single roller, double rollers, triple rollers 2) accessories: synetic polymer bearing, stainless steel/bronze liner, , shaft support etc. 3) capacity: up to 750 tons 4) diameter: up to 5000mm 5) length: up to 9000mm 6) heavy wall construction. Class cert ccs, abs, gl, lr, nk, kr, bv can be provided. Please feel free to contact with us freely for your inquiry: info at chinatopfar dot com
Supply marine hydraulic anchor windlass Can supply the marine windlass: Electric windlass, diesel windlass, Electric combined windlass, Hydraulic combined winch, Hydraulic combined winch 1) drive: electric / hydraulic 2) configuration: gypsy + drum + wrapping end 3) chain size: 19mm to 50mm 4) chain speed: complying with marine requirements 5) clutch: manually operated dog clutch 6) brake: manually and hydraulic operated band brake 7) control: local control Certificates: abs, gl, lr, bv, rms, nk, ccs, etc can be provided.
Can supply anchor capstan, electric capstan, hydraulic capstan: 1. The chain diameter is 11/14 to 58/60 (mm) 2. The working load is 5.9/7.4 to 133/153 (mm) 3. The anchoring speed is more than 12 (m/min) 4. The warping load is 5 to 60 (kn) 5. The warping speed is more than 10 (m/min) 6. Wire dia. Is 11 to 26 (mm) 7. Driven: electric or hydraulic Certificates: abs, gl, lr, bv, rms, nk, ccs, etc can be provided.
We, jingjiang top far international trading co., ltd(www dot chinatopfar dot com), can supply marine steering gear:, -, swing type electro-hydraulic steering gear, -, fork type electro-hydraulic steering gear, -, rotary van steering gear