Supply marine hydraulic anchor windlass
Can supply the marine windlass:
Electric windlass, diesel windlass,
Electric combined windlass,
Hydraulic combined winch,
Hydraulic combined winch
1) drive: electric / hydraulic
2) configuration: gypsy + drum + wrapping end
3) chain size: 19mm to 50mm
4) chain speed: complying with marine requirements
5) clutch: manually operated dog clutch
6) brake: manually and hydraulic operated band brake
7) control: local control
Certificates: abs, gl, lr, bv, rms, nk, ccs, etc can be provided.
Material: Stainless Steel 304, Stainless Steel 316,Carbon Steel;Iron case Variety : YDV-011íóYDV-012 Max.Load: 125kg-5600kg,190kg,350kg Motor(watts):400w-1600w,600w,1000w,1200w, Boat(m):5m-26m,5-20m,10m,26m
Material: stainless steel 304, stainless steel 316, carbon steel;iron case Variety : yd411íóyd411híóyd811íóyd811h Max.Load: 125kg-5600kg, 130kg, 185kg, 210kg, 250kg, 280kg, 400kg, 5600kg Motor(watts):400w-1600w, 600w, 800w, 1200w, 1600w Boat(m):5m-26m, 5-20m, 10m, 26m 125kg-5600kg, 130kg, 185kg, 210kg, 250kg, 280kg, 400kg, 5600kg Motor(watts):400w-1600w, 600w, 800w, 1200w, 1600w
Windlass Drive: electric/hydraulic Chain speed: > 9 m/min Chain size: 12.5mm ~ 48mm Rated pull: 1 ~ 10 tons Clutch: manually/automatic Brake: manually/automatic Control: local/remote control
Windlass The rated working load for electric combined &hydraulic combined windlass mooring winch is ranged from15kn to 226kn, for anchor chain dia from 19mm to 73mm., the load of winch drum from 40kn to 160kn, capacity from 110m to 250m. For electric single drum winch, the drum load is from 50kn to 250kn, nylon rope dia from 45mm to 90mm, steel rope dia from 20.5mm to 40mm. Wooden packing
Windlass The rated working load for electric combined &hydraulic combined windlass mooring winch is ranged from15kn to 226kn, for anchor chain dia from 19mm to 73mm., the load of winch drum from 40kn to 160kn, capacity from 110m to 250m. For electric single drum winch, the drum load is from 50kn to 250kn, nylon rope dia from 45mm to 90mm, steel rope dia from 20.5mm to 40mm. Wooden packing
Feature: large reduction ratio, compact construction, easy mounting & disengaging, steady in rolling and low voice. Specification: Mooring load: 100KN Nominal speed: 0-18m/min Capstan diameter: 600mm Chain diameter: 30mm Rated pressure: 20MPa. Speed range: 0.3-80r/min Volume efficiency: ¡Ý94% Other specifications are available.
Used MTU Amrine Engine of The specification: Type: 20V538TB91 Rated Power: 3300 kW Speed at Rated Power: 1900 RPM Number of Cylinders: 20 Bore: 185 mm Stroke: 200 mm Total Displacement: 107.5 liters Fuel Consumption: 1150 liters/hour Dimensions (L x W x H): 3790 x 1640 x 2505 mm Weight: 9080kg 2units
The Mercury Verado 250 is a high-performance outboard motor known for its power and reliability. Here are some key specifications: Engine Type: 4.6L V8 Horsepower: 250 hp Steering: Digital Throttle & Shift (DTS) Starter: Electric Shaft Length: Available in 25" (X-Long) and 30" (XX-Long) Power Trim & Tilt: Yes Fuel System: Electronic Fuel Injection (EFI) Alternator: 115-amp Weight: Approximately 600 lbs (272 kg) Cooling System: Water-cooled with thermostat & pressure-controlled The Verado 250 also features the Advanced MidSection (AMS) for reduced vibration and noise, and Adaptive Speed Control (ASC) for maintaining engine RPM despite changes in load or conditions12.
The Volvo Penta TAMD41M-A is a reliable and powerful marine diesel engine. Here are some key specifications and features: Engine Type: 6-cylinder, 4-stroke, direct-injected, turbo-charged marine diesel engine with aftercooler1. Power Output: 147 kW (200 hp)1. Cooling System: Freshwater cooled exhaust manifold and oil cooler1. Alternator: 14 V/50 A1. Other Features: Flexible front engine mounting, wet type exhaust elbow, lubrication oil filter, and turbo-charger
