1. Main Features: 1) Good compatibility: It can be applicable to 40W and 30W laser tube. 2) Fast response speed and effect. 3) Dramatically lengthen the life of laser. 4) Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc. 5) Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power. 6) The power supply has open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply. 7) The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser. 8) The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power. 9) Application: acrylic sculpture, cut; fabric sculpture, cut; rubber sheet sculpture, cut, etc. 2. Specification: Input: Input Voltage: AC220V or AC110V to be specified when placing order AC frequency: 47440HZ Cold Surge Current: 60A(AC220V Input) 30A(AC110 Input) Current Leakage: 0.7m AAC220V Input 0.4mA(AC110V Input) Output Maximum Input Voltage: DC 25KV Maximum Output Current: DC 20mA Efficiency: 90full load Mean Time Between Failure (MTBF): 10000H Response Speed: 1msfrom the switch Signal is given to the output current up to 90% of the setting current Control Interface: TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification) Withstand Voltage: Input-Output, Input-Shell: AC1500V 10mA 60S; Output negative is connected with machine shell. Protection: can work in open-circuit condition for a short time Require a good protective earthing and avoid arc between the positive and the machine shell Environment: Operating Temperature£º-10~40¡æ£¬Relative Humidity (RH)90©‡ Cooling Way: Force-Air Cooling (FAC) Dimension: LH=167*144*97(mm). 2.7kg,32*25*22cm carton box.
Product name : RGY animational stage laser lights Product Model : 0113 Laser power : Red:600mw Green:200mw Yellow:200mw Control mode : Sound Active, Automatic, DMX512, Master/ Slave, PC Control DMX channels : 12channels Scanning system : 30kkp Scanning angle : +/-30¡ã Power supply : AC85-255V Frequency : 50-60HZ Measurement : 310*200*90mm Cooling system : Fan Cooling Warm-up time : Within 10 minutes NW : 2.5kg Warranty : 18 months. Features : 1,the entire engine is manufactured according to ISO 9001 standard operating procedure. 2,laser module adopts solid semiconductor laser developed independently and electronic thermostatic apparatus, which makes our products work stably with the ultra-high brightness and long life time. 3,The scanner system adopts scanner with the frequency of more than 20k developed our own, which makes the pictures genera ted perfectly. Applicable for : KTV, Pub, Club, Bar, stage etc. Carton box with neoprene foam. Size:375*285*180mm
Laser machine
Laser Power: [Red Laser] 800mw [Green Laser] 200mw [Blue Laser] 100mw Control Mode: Sound Active, Automatic, DMX512, Master/ Slave, PC Control Scan Speed>20kkp, Scanning angle:+/-30degressPC control:compatible with ILDA computer laser show software,LIDA singles can be fully converted with the use of electronic switches. Power supply:ac110-220V,50-60HZ. Brand:YAO Color:black Size:310*200*90mm garrantee:2 years.
CW Diode Pumped Laser Modules (DPSS laser modules at 1064nm) are designed by side-pumping geometry with 808nm laser diode arrays and Nd:YAG rods. NDL is now providing high power laser modules with power from 20W up to 500W. It is widely used for industry, such as laser marking, engraving, welding, cutting, drilling and etc. 1) Technical Specifications Optical Output Power (CW): 20W, 30W, 50W, 75W, 100W ~ 500W Wavelength: 1064nm Nd:YAG Diameter:2mm ~ 8mm Beam Height:40mm, 45mm, 50mm optional 2) Download Data sheet: Fibre Coupled Laser Diode Modules Data sheet 3) Lead Time: 5~20 workdays. 4) Quote Request: Please contact us directly.
QCW Diode Pumped Laser Modules (DPSS laser modules at 1064nm) are designed with QCW laser diode arrays for Nd:YAG pumping. It can provide high pulse energy for amplification up to 2000mJ with high repetition rate up to 1KHz. These QCW DPSS laser modules are mainly used for research applications. 1) Technical Specifications Pulse Energy (200us): 20mJ ~ 2000mJ Wavelength: 1064nm Nd:YAG Diameter: 2mm ~ 8mm Nd:YAG Doping Level: 0.6~1.1% optional Beam Height: 40mm, 45mm, 50mm optional Repetition Rate: 0~100Hz, 100~500Hz, 500~1000Hz Max Duty Circle: 20% Pulse Width: 50~300us Cooling Structure: Water Cooled or Conductively Cooled Design Available. 2) Download Datasheet: Fiber Coupled Laser Diode Modules Data sheet 3) Lead Time: 5~20 workdays. 4) Quote Request: Please contact us directly.
Conductively Cooled Package (CCP) vertical laser diode stacks are mainly designed for low duty solid-state pumping. NDL is working hard to improve the optical power density for these stacks to get max output power within a limited optical window. This kind of laser stack is widely used for Nd:YAG pumping to get high pulse energy in QCW or Pulsed mode. Features: QCW laser diode bars with peak power 100W~300W 1~100 bars per stack Typical 808+/-3nm, other wavelength available Long life time > 1G Shots Support custom package design Datasheet: CCP Laser Diode Stack Datasheet 1) Technical Specifications Optical Output Power (QCW): 100W, 200W, 300W per Bar Diode Bar Numbers: 1~100 Bars per Stack Stacking Method: Vertical Stack, Horizontal Stack, 2D Stack Wavelength Available: 808nm+/-3nm Fast Axis Collimation: Optional Duty Circle Limited:
For OEM users or laser integrators, we can provide you with a range of high performance components and sub-assemblies at more attractive prices. The OEM pulsed laser consists of a laser head (pump chamber, Nd:YAG rod, lamp, laser resonator, optional aperture and optional beam expander), a lamp driver (power supply) and an optional chiller. These lasers can be used for laser welding and cutting. 55KG vary for different model.
1. High Performance CW Arc Lamps (Kr lamps) 2. High Performance Pulse Flashlamps (Xe lamps) 3. IPL Lamps.
355nm, 532nm, 1064nm, 10.6um f-theta lens. Portable size.
STSL scanner lenses specially designed and optimized for use in CO2 laser 2-axis galvo-scanner systems with full beam diameters of up to 15.0mm. Mirror sets appropriate for use with beam diameters up to 15mm require an increase in mirror separation in comparison with smaller mirrors. These changed optical conditions are catered-for by the STSL series. These single-element lenses are designed to represent the best achievable compromise for on-axis and off-axis aberrations, field flatness and F-theta characteristics, obtainable using single-element spherical-surface designs of (standard) 48mm diameter and 3mm edge thickness. The lens material is ZnSe. 48mm lens diameter.
Gooch & Housego products. There are following Q-switches in stock and they can be immediately delivered: QS27-6.5C-B, QS27-5S-B, QS27-5C-B, QS27-4C-B, QS27-4S-B, QS27-4S-S, QS27-3C-S, QS27-3S-S and Stallion series Q-switches. Portable size.
1)Model No.:LSR532NL 2)Wavelength:532 nm 3)Spatial Mode:TEM00 4)Operation Mode:CW or Modulation 5)(946, 1064&808nm):
CNI Optics can provide dot series, line series and cross series laser modules Dimensions: ¡é6.5x11, ¡é7x14, ¡é8x20, ¡é8x25, ¡é9x21, ¡é9x25, ¡é10x32,¡é10x36, ¡é12x32, ¡é12x36, ¡é13x35, ¡é14x42, ¡é16x50, ¡é16x70, ¡é18x60, ¡é20x70, ¡é22x80, ¡é26x70, ¡é26x110 (mm).
CNI Optics's closed-loop scanner systems, focus on developing various low-cost, high quality and high performance scanner systems for laser display and other industrial application. The scanner systems with scan speeds from 20Kpps to 60Kpps for the laser display industry. 2 x Scanner (Galvo) with mirror 2 x Scan servo driver (Amp) 1 x (X-Y) scanner mount 1 x ¡À24 VDC switched power supply 2 x Shield cable for scanner
The configuration: 50w, 70w Diode pumped, Rotating device Performance characteristics: 1. Rotating device formulate 2. Rotating device is suitable for any type of Laser Marking Machine and cylindrical, conical work piece to mark in circumference direction 360-degree. 3. The marking speed and rotational speed is consistent .Rotating and marking synchronously. 4. Marking head light base can fluctuate lift and the distance for 250mm. Application scope: Applied to any metal (including rare metal) íóalloy and oxidesíóepoxy resin íóink and so on. Widely used in electroníóglassesíóautoíócommunications productsíóelectronic componentsíóplastic buttonsíóhardware productsíótools accessoriesíóprecision machineryíóSanitary wareíójewelryíóescutcheoníóauto partsíóelectrical appliancesíóbags decorative claspíóKnives, lock, the cooking utensils, integrated circuit IC, medical equipment, etc. Technical parameters: Marking scale Marking speed Marking depth Maximum output power Laser wavelength Cooling way The machine power Marking precision 100*110mm
Machine characteristics: Adopt the newest Carbon dioxide laser device , Laser tube life more than 2 million hours ,apply to laser beam cuttingú¼engraving ,making. All parts focus on a cabinet, which operate easily . Application field:Engraving non-metal materials. Apply to garment accessories, package , architectural pottery, beverage packing, rubber product, electronic components and so on . Technical parameters: Marking scale Marking speed Marking precision Marking depth Maximum output power Laser wavelength Cooling way The machine power 70*70mm
Mechanical characteristics : Applied the krypton lamp to the laser source, adopt imported with original packaging key accessories such as ceramic cavity(English), Q-switch (English),Laser source, laser power (Singapore) and so on ,which ensure the high marking precision and speed. Having stable and the long-term work performance that belongs to the general model. Applicable materials and field: 1. Can be carved on the metal and many kinds of nonmetal materials. 2. Widely applied in electronic components, integrated circuit, electrical appliances, mobile communications, hardware products, tools accessories, precision instruments, glasses watches, jewelry ornaments, auto parts, plastic buttons, building materials, PVC pipes medical devices, etc. Wooden box and 250kg
Features of the machine: The company in many years development based on the experience of using new ideas created the novel style and superior performance of Semiconductor Laser marking machine. This machine that the lightning high conversion efficiency, output beam quality good, long life, and various performance indexes have reached the international advanced level. Its core components: diode pumped module, servo scanning galvanometer, sound-light Q switch, Q drives, laser power all has the profession leading level of the world. Applicable materials and field: Can be carved on the metal and many kinds of nonmetal materials, it is especially suitable for some require careful, high precision of the occasion such as electronic components, integrated circuit, electrical appliances, mobile communications, hardware products, tools accessories, precision instruments, glasses watches, jewelry ornaments, auto parts, plastic buttonsíóbuilding materials, PVC pipes medical devices, etc. Wooden box , 250kg
In order to supply automobile, machinery, electronics, metallurgy, petroleum chemical industry urgently needed in the depth of the laser marking and sculpture technology and system research and development, to provide enterprises meet the needs of the market and industrialization of laser products and technology. Recently, the successful development of the new generation laser engraving equipment - lamp pumped solid laser depth marking engraving system. This technology overcome traditional laser marking machine carving depth dive, carving slow faults, can achieve very beautiful deep engraving. This system incorporates laser marking and sculpture at an organic whole, is both a high-speed laser marking machine, is also a depth laser engraver machines multi-usage, simple operation, convenient and flexible. A, Technical features 1, the key parts is superior device such as a sound-light switch, pump lamp, etc, to ensure the high quality of laser system. 2, can use already long pulse width, high-energy laser engraver, and use short pulse width, peak value power laser to sculpture. 3, adopt special measures, under the same power consumption circumstances, peak power than ordinary lamp pumped solid state lasers to high, up to 10 times more likely to 300kW. 4, beam quality good, energy conversion, high efficiency. 5, the world's deepest power-forward, the fastest marking carving machines, one of engraving of high precision, good effect, the biggest engraving depth could exceed 5mm. 6, carving mode: can undertake 3 dimension two-dimensional or three-dimensional sculpture (namely sculptured figures and planar surface with fixed depth or different depth). B.Areas of application Can be used in automobile, motorcycle parts, hardware tools, stainless steel wares, medical apparatus and instruments, clocks jewelry, industrial bearings, mould etc many need deep engraving industry, may to the copper, aluminum, zinc , stainless steel etc in-depth engraving. C.Technique parameters Maximum laser average power 100W Maximum laser peak power 300KW Laser wavelength 1064nm Engraving range
