Inverter technology makes swimming pool heat pump reach an extremely high COP. Compared with normal heat pump in the market, inverter heat pump is of higher COP. Besides, the heat- ing time is much shorter. It greatly saves energy and enables you to enjoy swimming without waiting for a long time.
Absorbing clammy air and transferring it to warm and dry air, PHNIX HEAT PUMP DEHUMIDIFIERS can work as indispensable partners with PHNIX swimming pool heat pumps or work independently on commercial or industrial occasions. When the units are at work, problems, like condensation and furniture corrosion are solved.
Oe codes 150104919 8200101970 8200227686 8200227686 150108069 8200227686 6001544290 8200227688 150109834 150102231 8200591428 8200591475 8200312696 Kb number Kb02883 Part of compatible vehicles Model Logan (ls_) 1.5 dci (ls0j, ls0y) Logan (ls_) 1.6 16v (ls0m) Megane scenic (ja0/1_) 1.6 16v (ja0b, ja04, ja11) Kangoo express (fc0/1_) 1.6 16v bivalent Thalia i (lb0/1/2_) 1.5 dci Twingo ii (cn0_) 1.6 rs (cn0n, cn0r, cn0s) Kangoo express (fw0/1_) 1.6 16v Megane iii hatchback (bz0_) 1.6 16v (bz0h) Megane iii grandtour (kz0/1) 1.6 16v (kz0h) Wind (e4m_) 1.6 (e4mb, e4mc)
These are only a part of our products, CAT Fuel Injector 7N9843 3406 C12 / 3196 CATERPILLAR CODE/TYPE Stamping No. 7S1059 D342T,D353 137-2500 10R0963 1W5829 1W5829 7S5105 194-5083 4W7015 4W7015 7S8722 3304,3306,D330,D333,1673 147-0373 4W7016 4W7016 7S9891 3304 160-2303 4W7017 4W7017 8M1584 D333C/3306 212-3463 4W7018 4W7018 8N1831 D342T,D353 160-1090 4W7022 4W7022 8N3173 D353 OR8773 4W7025 4W7025 8N3174 212-3464 10R0725 7N0449 7N0449 8N3175 3204 212-3466 10R0968 7W7032 7W7032 8N3176 D343 116-5425 7W7038 7W7038 8N3177 D336/1674156-1011 8N7005 8N7005 8N4694 3304,3306,D330,D333,1673 These are only a part of our products,
Low temperature cooling liquid circulating pump also know as cooling chiller. This device adopt mechanical refrigeration, the main function is provide low temperature liquid, low temperature water bath. It can also connect with rotary evaporator, vacuum freeze drying oven, cycle water vacuum pump, magnetic stirrer and so on, to achieve the chemical reaction or drug store under low temperature condition.
Vacuum Pump Manufacturer from Shanghai YiYou German vacuum pumps are widely used in vacuum packaging and many other areas of the vacuum pump, providing a strong power, proven, reliable operation. Oil circulation lubrication, single stage compressed rotary vane vacuum pump. 1, the standard motor direct drive, can be customized special specifications. 2, simple and compact structure, suitable for all types of mechanical matching. 3, the suction port is equipped with a check valve to prevent the pump oil into the vacuum system. 4, smooth operation, no special fixed and shock absorber. 5, air-cooled, no water cooling. 6, equipped with oil and gas separation device, exhaust clean, low noise, in line with environmental requirements. 7, reliable oil circulation structure, to ensure long-term continuous operation. 8, installation and maintenance operation is simple, low operating costs.
Model SJP50WP-170FA Suction Diameter 2 inch (50mm) Discharge Diameter 2 inch (50mm) Max.Capacity (m3/hr.) 42 Max.Head: 23m Suction Lift: 8m Self-Priming time: 70S Max Speed: 3600rpm (adjustable) Engine Model 170FA Type OHV Single-cylinder �vertical �air-cooled �4-stroke �direct injection Bore Stroke (mm) 70X57 Displacement(cc) 219 Compression ratio 22:01 Rated power/ Rated speed (Hp/r/min) 3.8/3000 4.2/3600 Max power/ Max speed (Hp/r/min) 4.2/3000 4.6/3600 Lubricating system Pressure splashed Starting system Recoil starter Fuel type 0# �-10# �-20# diesel Fuel tank capacity (L)/(US.Gal) C=2.5L / 0.66Gal Fuel consumption (g/hp.h/r/min) 209/3000 218/3600 Lube oil type CD grade or SAE 10W-30, 15W-40 Lube oil capacity (L) 0.75L / 0.198Gal Starting motor capacity (V �kW) 12V 0.8kW Charging generator capacity (V �A) 12V 3A Battery capacity (V �Ah) Above 12V 20Ah Overall dimension L W H mm C=530X415X515 L=530X420X555 Dry weight(kg) 38 Recoil starter 41.5 Electric starter
Model SJ80WP-170F Suction Diameter 3 inch (80mm) Discharge Diameter 3 inch (80mm) Max.Capacity (m3/hr.) 60 Max.Head: 23m Suction Lift: 8m Self-Priming time: 120S Max Speed: 3600rpm (adjustable) Engine Model 170F Type OHV Single-cylinder �vertical �air-cooled �4-stroke �direct injection Bore Stroke (mm) 70X59 Displacement(cc) 227 Compression ratio 21:01 Rated power/ Rated speed (Hp/r/min) 5.8/3000 6.5/3600 Max power/ Max speed (Hp/r/min) 6.5/3000 7.2/3600 Lubricating system Pressure splashed Starting system Recoil starter Fuel type 0# �-10# �-20# diesel Fuel tank capacity (L)/(US.Gal) C=3.5L /0.92Gal Fuel consumption (g/hp.h/r/min) 206/3000 215/3600 Lube oil type CD grade or SAE 10W-30, 15W-40 Lube oil capacity (L) 0.75L / 0.198Gal Starting motor capacity (V �kW) 12V 0.8kW Charging generator capacity (V �A) 12V 3A Battery capacity (V �Ah) Above 12V 20Ah Overall dimension L W H mm C=565X455X540 CL=565X455X555 Dry weight(kg) 49 Recoil starter 51.5 Electric starter
Model SJ100WP-186F Suction Diameter 4 inch (100mm) Discharge Diameter 4 inch (100mm) Max.Capacity (m3 / hr.) 96 Max.Head: 25m Suction Lift: 8m Self-Priming time: 180S Max Speed: 3600rpm (adjustable) Engine Model 186F Type OHV Single-cylinder, vertical, air-cooled, 4-stroke, direct injection Bore Stroke (mm) 86X70 Displacement (cc) 406 Compression ratio 20:01 Rated power / rated speed (Hp / r / min) 7.7 / 3000 9.0 / 3600 Max power / Max speed (Hp / r / min) 8.8 / 3000 10.0 / 3600 Lubricating system Pressure splashed Starting system Recoil starter Fuel type 0 #, - 10 #, - 20 # diesel Fuel tank capacity (L) / (US.Gal) C = 5.5 / 1.45 L = 12.5L / 3.3Gal Fuel consumption (g / hp.h / r / min) 201/3000 210/3600 Lube oil type CD grade or SAE 10W-30, 15W-40 Lube oil capacity (L) 1.65L / 0.44Gal Starting motor capacity (V, kW) 12V 0.8kW Charging generator capacity (V, A) 12V 3A Battery capacity (V, Ah) Above 12V 20Ah Overall dimension (L W H) mm C = 645X475X605 CL = 645X475X690 Dry weight (kg) 67 (Recoil starter) 70.5 (Electric starter)
CRLX series vertical mixed flow pump is a newly developed product with both homeland and overseas advanced experience in design and manufacture. It is used to deliver clear water, sewage with certain solid particles (such as iron scrap, sand, coal powder etc.) and industry waste water and seawater with corrosive. The temperature of liquid can not be above 80. It is widely used in original water works, waste water factory, metallurgy and steel industry (especially suitable for delivering oxygenation iron sheet water in swirl pool), power stationï¼?mine, civil project and farmland etc. Performance Range Capacity: 150-36000m3 /h Head: 50 m impeller stage: single stage. rotor part: drawable or not drawable Instruction of pump type 300CPLX-50A 300: Outlet diameter is 300mm CP: Company Code, means produced by CREDO PUMP LX: Vertical mixed flow pump 50: Max head is 50m A: A,B,C separately represents that outer diameter of impeller is changed the first, the second and the third time.
Horizontal Axially Split casing pump is a new generation of single stage double suction centrifugal split pump with high performance and efficiency upgraded from S type split case pump, it is mainly applied to liquid transferring occasions, including water works, air conditioner circulation water, heat supply pipe network system, building water supply, irrigation, drainage pump station, power station, industrial water supply system, fire fighting system, ship industry, water supply and drainage for mines. Product name : Single stage double suction Split case pump Item : Andritz type Features : ---Axially split casing ---Double suction single-stage impeller, hydraulically and statically balanced. ---Horizontal or vertical installation ---Shaft sealed by gland packing or mechanical seal ---Various materials available with cast iron, ductile iron, bronze and stainless steel, or with corrosion proof coating used in wet parts. Data sheet : Flow: up to 36000m3/h Head: up to 220m Frequency: 50HZ / 60HZ Temperature: 105 max Working pressure:2.5MPa Application: ---Industrial and municipal water supply ---Chilled and condenser water circulating systems
CRLC series vertical long-shaft pump is a newly developed product with both homeland and overseas advanced experience in design and manufacture. It is used to deliver clear water, sewage with certain solid particles (such as iron scrap, sand, coal powder etc.) and industry waste water and seawater with corrosive. The temperature of liquid can not be above 80. It is widely used in original water works, waste water factory, metallurgy and steel industry (especially suitable for delivering oxygenation iron sheet water in swirl pool), power stationï¼?mine, civil project and farmland etc. Performance Range Capacity: 150-10000m3 /h Head: 220m Impeller stage: single stage or multistage. Instruction of pump type 300CPLC2-50A 300: Outlet diameter is 300mm CR: Company Code, means produced by CREDO PUMP LC: Vertical long-shaft pump 2: Impeller numbers (No indication, when only one impeller) 50: Max head is 50m A: A,B,C separately represents that outer diameter of impeller is changed the first, the second and the third time.
The Negative pressure RSR series Capacity:0.86-452m3/min Pressure:-9.8--49kpa Motor:0.75-475kw 1.Payment terms: T/T(30% in advance and balance before delivery);L/C 2.Packing: Standard exporting wooden/iron box packing. 3.Delivery time: Commonly 20 days after receive advance payment(from our factory to your Karachi port) 4.Certificate: CE or any clients indicated.
Gy type molten salt pump is independently developed series products of the molten salt pump. Gy type molten salt pump is designed by jinan warwick pump co., ltd. It is on the basis of experience of producing at high temperature liquid pumps and pump of the molten salt solution. It references the same type of foreign products. And it is a molten salt circulation system or molten salt transport of special high temperature pump. Gy type molten salt pump is used in conveying high temperature molten salt (nitrate) for melamine project, alumina projects and caustic soda project and other fine chemical industries. Gy type molten salt pump is used in conveying high temperature molten salt (nitrate) for melamine project, alumina projects and caustic soda project and other fine chemical industries. -
Name: Vertical Pump (VSX Series) Structure Type & The Application Conditions : API standard, VS1, VS2, VS3 structure, single-stage, two or more stages, cantilever, long axis of liquid formula, diversion shell type, the class type pump is mainly used in petrochemical, iron and steel metallurgy, electric power, water conservancy , paper and sewage irrigation areas, typically a power plant circulating water pump. Specification: Maximum Capacity Q: 30000/h Maximum Head: 200m Pressure: 4.0MPa Highest Obtainable Temperature: +90
Name:API610 BB3 Multistage Horizontal Split Pump CHARACTERISTICS Axially split, horizontal multistage centrifugal pump Near-centerline mounted Diffuser casing Single suction, enclosed impeller Thrust compensation by opposed impeller groups Side-Side nozzle arrangement Materials of construction per API 610, other materials on request DESIGN FEATURES Heavy duty process design according to API 610 latest edition (BB3 type) Ring oil lubrication, other methods of lubrication available Replaceable wear rings for casing and impeller Fan and water cooling available OPERATING LIMITS Capacity 50 to 3,000 m³ /h Head 200 to 3,000 m Discharge flange size 3 to 14 in Max. Pressure 35Mpa Temperature up to 205°C APPLICATIONS Oil fields and terminals Crude oil and oil product pipelines Water pipelines Fluid injection High pressure services Power plants
Introduction These test pumps are a fast, safe and simple method for hydrostatic testing, ideally suited to work with the above plugs or on a stand alone basis eg heat exchanger tubes, pipes, pressure vessels, hoses, etc. These test pumps are for oil, water or aggressive medium are complete hydraulic units ready for connection which are provided for generating operating pressure up to 1,500bar. The pressure will be generated by means of a pneumatically operated pump. The pump will be connected to the existing industrial compressed-air ductwork system. Advantages - Standstill of the pump when reaching the set final pressure - No energy consumption in case of long pressure holding times - No dissipated heat during the pressure holding phase - Substitute of leakage by automatic re-delivery through the pump - Regulator to control inlet air supply - High pressure bleed valve and high pressure outlet - Simple air-driven pump - Test in the field or in the shop - Simple installation, operationally reliable, easy to maintain
Introduction These test pumps are a fast, safe and simple method for hydrostatic testing, ideally suited to work with the above plugs or on a stand alone basis eg heat exchanger tubes, pipes, pressure vessels, hoses, etc. These test pumps are for oil, water or aggressive medium are complete hydraulic units ready for connection which are provided for generating operating pressure up to 1,500bar. The pressure will be generated by means of a pneumatically operated pump. The pump will be connected to the existing industrial compressed-air ductwork system. Advantages - Standstill of the pump when reaching the set final pressure - No energy consumption in case of long pressure holding times - No dissipated heat during the pressure holding phase - Substitute of leakage by automatic re-delivery through the pump - Regulator to control inlet air supply - High pressure bleed valve and high pressure outlet - Simple air-driven pump - Test in the field or in the shop - Simple installation, operationally reliable, easy to maintain
Name:api610 bb5 multistage barrel pumps Characteristics Radially split, horizontal multistage centrifugal pump Centerline mounted Diffuser casing Single / double suction, enclosed impeller thrust compensation by balance drum or rotor design with opposed impellers available top-top nozzle arrangement Materials of construction per api 610, Other materials on request Design features Heavy duty process design according to api 610 latest edition (bb5 type) Ring oil lubrication, other methods Of lubrication available Cartridge pull out design available Sleeve / tilt pad bearings design available replaceable wear rings for casing and impeller alternate nozzle arrangements available Fan cooling available Special design for decoking service available low npsh double suction design available Operating limits Capacity up to 2, 000 Head up to 4, 572 m Discharge flange size 2 to 12 in max. Pressure 30mpa Temperature 450 Applications Hydrocarbons chemical solutions water Seawater Decoking jet service charge pumps descaling service pumps
Section ix code qualified welders for Api applications Fabrications designed in accordance with ped (pressure equipment directive) and national standards when required Wide range of hydraulic designs To suit all applications Choice of bearings and mechanical seals pump mounted thrust bearing when required tank or sump mount options available Operating limits Capacity to 25, 000 , head to 1, 500 m Pressure to 15mpa Applications Condensate Power plants municipal hydrocarbons Pipeline Refineries Molten salt applications Characteristics Double suction first stage available Stage impeller Over 700 vertical ruhrpumpen pump hydraulics can be used for construction Integral fabricated column support bearings collet or ring and key impeller mounting One-piece shaft construction for shaft Lengths to 6 m (20 ft) Rigid 4-piece coupling Single or double suction first stage Single stage or multistage available Nozzles are available with the suction In the head or barrel Design features Api 610 latest edition construction available (vs6 type) Fabrications manufactured using asme
