CRLC series vertical long-shaft pump is a newly developed product with both homeland and overseas advanced experience in design and manufacture. It is used to deliver clear water, sewage with certain solid particles (such as iron scrap, sand, coal powder etc.) and industry waste water and seawater with corrosive. The temperature of liquid can not be above 80. It is widely used in original water works, waste water factory, metallurgy and steel industry (especially suitable for delivering oxygenation iron sheet water in swirl pool), power stationï¼?mine, civil project and farmland etc.
Performance Range
Capacity: 150-10000m3 /h
Head: 220m
Impeller stage: single stage or multistage.
Instruction of pump type
300CPLC2-50A
300: Outlet diameter is 300mm
CR: Company Code, means produced by CREDO PUMP
LC: Vertical long-shaft pump
2: Impeller numbers (No indication, when only one impeller)
50: Max head is 50m
A: A,B,C separately represents that outer diameter of impeller is changed the first, the second and the third time.
Inline Pressure Pump
The ISG vertical inline centrifugal pump is an excellent hydraulic model selected by our company's scientific and technical personnel and internal water pump experts. It adopts the performance parameters of the IS type centrifugal pump and is designed by ingenious combination on the basis of general vertical pumps. At the same time, suitable hot water, high temperature, corrosive chemical pumps and oil pumps are derived from the ISG type according to the use temperature and medium. ISW ISG series pump are horizontal  vertical single stage single suction  centrifugal pipeline pumps. They are widely used in industry and urban water supply and drainage, high rise building pressurization water supply, garden sprinkler irrigation, fire pressurization, long-distance water supply, heating, bathroom cooling and heating water circulation pressurization, and equipment matching, etc for transporting clean water  and other liquids with physical and chemical properties similar to clean water. The temperature of the medium conveyed by the ISW ISG type pipeline pump shall not exceed 80 C, the ambient temperature shall not exceed 40 C and the relative humidity shall not exceed 95%.
Tiger pumps combines more than 10 years of experience in pump development and manufacturing with a deep commitment to fully understand the needs of our customers. Our detailed process and application knowledge has allowed us to develop innovative pumping solutions for our focus segments including tailor made systems if required. Our active research & development supports this customer-oriented approach. Tiger pumps has sales and service facilities in all the major markets of the world to provide fast and flexible response and support. Advantages:- * minimum use of floor space. * the npsh available can be the lowest level to satisfy the npsh requirements of the pump. * no priming required the pump bowl assembly is submerged in the fluid being pumped. * the vertical turbine is highly versatile and adaptable in terms of both location and pump-length * easily modified for changing hydraulic conditions. * low operating speeds. ***available in 3" and 4" in 3-12 stages according to requirement. In standard export worthy packing.
Design Features: Vertical, Centrifugal, Monoblock (unibuilt) type pump fitted with single stage closed Impeller in Volute Casing having In-Line suction & delivery. Can be made available in Close-Coupled design also. Custom-built Design: Pumps with variable supply voltage / frequency and different material of construction can be offered on request.
Type ZJ and ZJLR pumps are vertical,centrifugal slurry pumps submerged in sumps to work.They are designed for delivering abrasive,large particle and high slurries.These pumps have no need of any shaft seal and sealing water.they can also be operated normally for insufficiend suction duties. Wet parts of Type ZJL pump are made of abrasion-resistant metal. All parts of type ZJLR pump immersed in liquid are lined with rubber our liners.They are suited to transport non-edge angle abrasive slurry. Different size wooden case
This pump is design in vertical type seal less Glandless pump with m
Shinjo Valves-G Series Inline Centrifugal Pump Summary G Series Inline Centrifugal Pump G series inline centrifugal pump is also be called Gseries single-stage and single-suction vertical centrifugal pump, whose performance accords with International Standard of IS02825, and is designed according to latest National Industry Standard of JB/T6878.1 -93. Its efficiency is average higher 3-5% compared with the parameter of JB/T6878.2-93. It is the power saving new product replacing former SG series inline pump. Its max. operating pressure is no higher than 1.0 MPa. Suction pressure is no higherthan 0.2MPa. Performance range: capacity 3.2 - 400m3/h head10-80m Materials contacted with liquid can be selected according to the condition which medium is corrosive to pump. Main part materials contacted with liquid as follows: Except above materials, other applied materials and code selected by customers must accord to Standard GB2100-80. Material code that is not specified by National Standard may use international general material code or nation widely regarded material code ( such as industry or our Company specification).
Product Description OEM Machine Precision Turbine Pumps Price of product ( USD price or FOB price) : please call to enquire Product origin : Japan Key Specifications/Special Features : 1. Excellent cost performance, effectively reduces equipment and system costs. 2. Available in lead-free copper alloy and stainless steel pump materials for optimal selection. 3. Comes standard with a SiC Carbon FKM mechanical seal for strong chemical and heat resistance. 4. Precisely machined components assembled with a high precision custom built motor. The impeller is fixed to the shaft to prevent wear from contact with other parts to maintain excellent performance over a long pump lifetime. 5. Available in L-type (medium pressure) and H-type (high pressure) models for best possible fit, reducing motor size and power consumption to reduce overall equipment cost. Minimum Order Size and Packaging details : 50 UNITS per shipment, packed on pallet
Vertical Submersible Pumps with extended shaft directly goes into sump or tank mainly used for solvents with motor above the ground and the whole pumps below mounting plate inside the tank. Available in Metallic as well as Non-Metallic MOC.
