Product Description: a. five gears, and the highest speed can reach 1045r/min, improving drill efficiency b. 53 x 59 drilling rod adopted, high rigidity and strong delivery torque. c. the machine is equipped with national patent technology: taper clutch, with characteristic of strong transmission torque, easy operation and free maintenance. d. for the winch, we use large module planetary gear and add supporting frame, greatly increasing hoisting and braking ability of the winch. e. Vertical spindle are fixed by four groups of bearings to ensure that the rotary machine is rigid enough for gravel layer and other complex geological conditions.
1.keeping bracket is installed on the hoist to form a double wheel support structure, can withstanda strong blow. 2.Vertical box four couple of bearings positioned to ensure the rotary machine has a sufficient rigid response to gravel layer, the complex geological conditions. 3.This machine adopts national patent technology taper clutch,with charactristics of strong transmission torque, easy to operation, free to maintenance. 4.53x59 driving lever is adopted, high rigitidy, strong delivery torque.
ST multi-purpose deep Core Drilling Rig is our independent research and development products. Adopting newest model & advanced hydro technology, our water well drilling machine are mainly used for well drilling in resource exploration hydrology wells, civil use water well, agriculture irrigation project, and can also be used for coal-mine gas exploitation, coalbed methane, shallow layer of shale gas, terrestrial heat, or salvage work. Made from high quality materials, with fashion and compact design, that keeps our drilling rigs more efficiency and with low failure rate, more economic and durable, and with a high comprehensive cost performance. Our water drilling rigs have received the real market validation as the majority of our customer's positive feedback.
1. Drilling machine full hydraulic drive, easy operation and flexible, easy to shift, good mobility, saving time and effort; 2. Drill rotator with dual hydraulic motor drive, the output torque, greatly improving the drilling rig rigidity; 3. The new angle mechanism makes the hole more convenient, adjust the scope of larger, can reduce the requirements of the face; 4. With a dedicated drill pipe with drill (drill pipe, sleeve, eccentric drill, etc.), in the unstable formation with casing wall openings, conventional ball teeth drill hole; 5. The rig can be directly connected with the hydraulic station, the structure is simple; the hydraulic station frame is equipped with a roller, which is easy to move and relocate. The engine is composed of three parts: host, hydraulic station and console.
Main Features a. ST series drilling rig adopts CG140 model auto transmission, has 10 rotation speeds and easonable speed range, with eight forward roation gears and two reverse rotation gears, high speed, strong stroke and wide scope of application. b. Large engine power and two reverse rotation gears, can easily solve the drilling work accident. c. The operation handles are fixed together in reasonable layout to make it more convenient for workers to operate the machine. d. Equipped with normally closed hydraulic chuck, operation is flexible and reliable e. Spindle and hoist can be operated separately. f. Spindle has big inner diameter, able to use big hexagonal drilling rod.
Product Description: 1. Compact structure of the whole machine with small dimensions meets the requirement of drilling in limited space and tunnel transportation. 2. With two optional drive modes of the drive unit, the drilling rig has a wide adaptability of strata. 3. Extendable mast (or optional box-type mast) is adopted to meet the requirement of long casing drilling construction, which improves the working efficiency. 4. Integrated visualized pressure feeding system can regulate the drilling pressure accurately according to the drilling depth. 5. With the configuration of 4 hydraulic supporting legs, it can realize rapid horizontal adjustment and transportation without crane.
Product Feature: 1. With hydro-automatic feeding device, and high drilling efficiency. 2. Designed with hydro-chucking unit instead of slips to ensure drilling from stop when changing pipes. 3. Close levers, convenient to operate, safe and reliable operations. 4. Compact in structure. All the drill, water pump and diesel engine installed on one base frame result in space-saving. 5. Light in weight, easy disassembling for transportation and applicable to working conditions in plain and mountain areas.
Product Description: 1. Hydraulic-control drill mast, can be raised and put down by hydraulic cylinders,which saves time and worker labor. 2. Rubber track,the weight is lighter and does not hurt urban road, suitable for projects in city. 3. Four hydraulic jacks, can lift the machine to max.height 1.3m,so that the machine can be loaded onto and unloaded from truck compartment. Also they can be used for rig leveling and support at work. 4. 24V electric-strat diesel engine reduces the operator`s labor intensity. 5. Independent BW-160 mud pump ,has bigger flow displacement and pressure, easy maintenance. 6. Optional installation of hydraulic twist tube machine(75-168mm),improve work efficiency and reduce labor costs.
Product Applications 1. Widely used in drilling large diameter blast hole in mining, road, national defence,water conservancy and so on. 2. Necessary drill equipment for prophase surface mine project. Product Characteristics 1. Light weight, easy portable, suitable for different working environment, like plain or valley places. 2. Handle rack, easy operation, safe for body. 3. Hydraulic power drilling device, high effiency. 4. Fast Drilling speed; horizontal and vertica direction drill.
1. Equipped with the system of hydraulic feeding, which helps improve drilling efficiency and reduce labor intensity. 2. Safe and reliable, the drill adopts ball-type clamping mechanism, the anchor rod can be taken out without closing down. 3. The handles of concentrated distribution make the drill easy to operate and the hole pressure gauge can help you to grasp the drilling situation in operation. 4. Compact structure with less space occupying, the rig, pump and power machine are installed on the same base frame. 5. Lightweight and high decomposability, convenient to remove and suitable for operating in both plat and mountainous areas.
Product description The ST-200 drilling rig is a lightweight shallow hole rig with oil pressure feed. Suitable for census exploration, geophysical exploration, road and building exploration, and small well drilling. 1. It has automatic hydraulic feeding mechanism to improve drilling efficiency and reduce labor intensity. 2. The use of ball card type clamping mechanism, can achieve non-stop bar, easy to operate, safe and reliable. 3. The handle is concentrated, easy to operate. It is equipped with a bottom pressure gauge to indicate the pressure, which is convenient for grasping the inside of the hole. 4. Compact structure, the drilling machine, water pump and power machine (diesel or electric motor) are assembled on the same base, occupying a small area of the airport. Light weight, high decomposability and easy to move.
Product Feature: 1. Power can be equipped by electrical motor or diesel engine; 2. Hoist adopts Frictional clutch mechanism, using powder metallurgy friction plate,with good performance and long service life; 3. With large rotary torque, has different rotating speed grades; 4. Very Effective in Diamond drilling. 5. Can be mounted on wheel-trailer, crawler or truck. Product Application: 1. ST-200 drilling rig is a new-type, portable engineering drilling machine for multiple applications. 2. ST-200 applies to water wells, geological exploration&survey, mineral prospecting, blast hole, geothermal air-conditioner holes and so on. 3. ST-200 can drill all kinds of ground,such as soil, mud, sand,gravel,weathering rocks, hard rocks and so on.
Product Feature: 1. With a hydraulic feeding mechanism, the pump mechanism and the reverse function, improve drilling efficiency, reduce labor intensity. 2. The rig is equipped with a ball with a cassette holding mechanism of six-party initiative to drill, can implement non-stop down the pole, high efficiency, safety and reliability. 3. bottom hole pressure gauge with pressure, easy to grasp hole situation. 4. handle centralized, easy to operate. 5. Compact rig structure, small size, light weight, easy to disintegration and handling, for the plains or mountain areas. 6. vertical shaft to form structures Plus, vertical through-hole diameter increased by a larger diameter drill, better adapted to high torque transmission. 7. The electric start diesel engine, convenient and secure.
Product Feature: 1. The rig is equipped with latest MW525 car transmission assembly, it owns 10 forward gears and 2 reverse gears, the gear speed design is reasonable to meet the needs of different drilling technology . 2. The drilling rig with large output torque and bearing capacity easy to handle a variety of underground accidents. Mechanical transmission structure is compact, spindle diameter is 96mm, bearing distance is big, drilling rig rigidity is good. 3. Hydraulic system controls the feeding pressure and speed to meet the needs of all kinds of formation drilling. The machine is equipped with pressure indicator at the bottom of the hole, it is easy to grasp the situation inside the hole. 4. This drilling machine is small size, light weight, good disassembly, good layout, flexible and reliable operation, easy maintenance.
1. The Horizontal Glass Drilling Machine is suitable for drilling hole for different glass thickness and drilling different diameter hole by equipping with different drilling bits. The machine is good for batch processing. 2. Two drilling spindles, one at the lower side and another upper side. When the glass is put on the table, it is fixed pneumatically and the lower spindle will rise up automatically to drill from the bottom side while the upper bit is operated by manual. 3. The cooling water runs inside the core drill so that the cooling effect is directly acted onto the glass without any loss. Holes of different sizes can be achieved with bits of different diameters.
Main Features 1. Special for drilling of aluminum window, curtain wall profiles. It is suitable for long profile process and mass production 2. Max process cross section is 250*250mm, Max process length is 5000mm 3. Pneumatic-hydraulic damp feeding system 4. This machine is equipped standard with four heads and can come with additional heads if requested
Product Feature: 1.Engine : Feed by hydraulic cylinder,the drilling efficiency is higher and it can save labor. 2.Drill rod : 53x59 drilling rod adopted,high rigidity and strong delivery torque. 3.Spindle : Vertical spindle are fixed by four groups of bearing to ensure that the rotary machine is rigid enough for gravel layer and other complex geoloical conditions. 4.Mud pump : Equip mud pump with flow 160L/min,save cost and also make the structure compact. 5.Concentrated handle, small footprint,light weight, strong decomposition, easy to move.
Product Feature: 1. With the hydraulic feeding mechanism, improve the drilling efficiency, reducing the labor intensity of workers. 2. The rig is equipped with a ball on a cassette holding mechanism and a six side rod, the rod can be replaced without shutdown, high work efficiency convenient operation, safe and reliable. 3. Furnished with hole bottom pressure gauge pressure indicator, and easy to master the status inside the hole. 4. The handle centered, convenient operation. 5. The drilling machine has the advantages of compact structure, small volume, light weight, convenient move.
Product Feature: 1. Power can be electric motor or diesel engine as options. 2. Two or four wheels can be mounted on tractors, trailers or cars. Easy for outdoor and rugged place drilling. 3. Integrated mud pump, gearbox, hoist, etc. Not only saving land, but also easy to take and operate. 4. Different operation handles to control working. One person is able to operate it. 5. Easy to assemble and dissemble. One person is able to handle.
Product Feature: 1. Used for general investigation, geophysical exploration, high-way and building construction, and blast-hole drilling etc. 2. With hydro-automatic feeding device, and high drilling efficiency. 3. Designed with hydro-chucking unit instead of slips to ensure drilling from stop when changing pipes. 4. Close levers, convenient to operate, safe and reliable operations. 5. Compact in structure. All the drill, water pump and diesel engine installed on one base frame result in space-saving. 6. Light in weight, easy disassembling for transportation and applicable to working conditions in plain and mountain areas. Product Parameter: Drilling depth 100/180 m Initial hole dia. 150mm Final hole dia. 75/46mm Drill rod dia. 42/43mm Angle range 90°-75° Dimensions(LÃ?WÃ?H) 1620Ã?970Ã?1560(mm) Weight(without power unit) 620kg Migration distance 350mm Swivel Head Spindle speed(5-speed) 1010/790/470/295/140r/min Spindle stroke 450mm Upward displacement speed of idling vertical spindle 0.05m/s Downward displacement speed of idling vertical spindle 0.067m/s Spindle pull-down max 15KN Spindle lifting capacity max 25KN Hoist Max .lifting capacity(single rope) 15KN Lifting rotating speed 121/76/36r/min Hoisting drum linear velocity (two levels) 0.166/0.331/0.733/1.465m/s Drum dia. 140mm Wire rope dia. 9.3mm Wire rope capability 35m Brake dia. 252mm Brake belt width 50mm Oil Pump Model YBC-12/80 Rated pressure 8Mpa Displacement 8ml/r Rated speed 1500r/min Power (diesel engine or motor) Model (diesel engine) S1100A2 Rated speed 2200r/min Rated power 10.3KW Model (motor) Y160M-4 Rated power 11KW Rated speed 1460r/min
