High-Performance Borehole Drilling Rig

Product Feature: 1. The rig is equipped with latest MW525 car transmission assembly, it owns 10 forward gears and 2 reverse gears, the gear speed design is reasonable to meet the needs of different drilling technology . 2. The drilling rig with large output torque and bearing capacity easy to handle a variety of underground accidents. Mechanical transmission structure is compact, spindle diameter is 96mm, bearing distance is big, drilling rig rigidity is good. 3. Hydraulic system controls the feeding pressure and speed to meet the needs of all kinds of formation drilling. The machine is equipped with pressure indicator at the bottom of the hole, it is easy to grasp the situation inside the hole. 4. This drilling machine is small size, light weight, good disassembly, good layout, flexible and reliable operation, easy maintenance.

ST-200 portable water well drilling rig equipped with BW-160 mud pump and 22HP diesel engine, Max. drilling depth can be 230m with the opening diameter of 75-400mm, trailer, crawler, and tractor chassis for choice. a. the machine is equipped with crawler chassis device, easy to move with fast speed. b. hydraulic oil pressure feed device, improve drilling efficiency. c. pressure gauge display the condition of the bottom of the drill hole. d. drill mast controlled by hydraulic cylinder, improve the efficiency diesel engine adopt the electric starter, to reduce the labor intensity.

Drilling Rig Description: 1.Construction drilling of the projects e.g. prospection, geotechnical investigation, railway, road, port, bridge, water conservancy and hydropower, tunnel, well, industrial and civil construction; 2. Core drilling, mining exploration, Or exploration; 3. Small hole diameter water well drilling; 4. Geothermal pipe-installing for heat pump; 5. Small-diameter hole foundation piling drilling. Feature: ST-200 type drilling rig is a hydraulic feeding of low speed and high torque portable drilling rig. The railway, hydro power, traffic bridges foundation and other buildings in the engineering geological investigation. The geological core drilling, geophysical survey The small grout Confucians, blast hole drill The small water well drilling. The characteristics of drilling rig: 1. With the hydraulic feeding mechanism, improve the drilling efficiency, reducing the labor intensity of workers. 2. The rig is equipped with a ball on a cassette holding mechanism and a six side rod, the rod can be replaced without shutdown, high work efficiency convenient operation, safe and reliable. 3. Furnished with hole bottom pressure gauge pressure indicator, and easy to master the status inside the hole. 4. The handle centered, convenient operation. 5. The drilling machine has the advantages of compact structure, small volume, light weight, convenient move.

Product Description: ST-200 model crawler-mounted drilling rig is equipped with BW-250 mud pump. Its triplex mud pump. Have high pressure and large discharge, its adapt to the big diameter and depth holes drilling. The main machine equipped with shift device, fore-and-aft movement by itself, convenient for operate. Main winch and minor winch drive by hydraulic system, they are installed on the main drilling machine. Compact in frame. Its adapted to the wire line coring drilling. The machine is mainly used for water well, wire-line coring drilling, geothermic well, general investigation and exploration. Road and tall building ground drill exploration and other foundation working.

JK610 Crawler Mounted Blasting Borehole Drilling Rig Crawler Mounted Hydraulic DTH Drilling Rig borehole drilling machine In contrast with pneumatic drill rig, the air displacement of matched air compressor reduces 30% to 50%. JK610 internal combustion (electric) crawler mounted hydraulic DTH drill rig, is the latest updated product of "Sharp Sword" series, featuring its better performance, lower operation cost and humanized design.  It adopts a 70kW Yuchai diesel engine and hydraulic oil pump station assembly to generate power, allowing rigs to rotation, propelling, lifting, walking and angle positioning.  During operation, only the percussive hammer consumes the compressed air. In contrast with conventional pneumatic drilling rigs, JK610 consumes about 40% to 50% less energy (oil or electricity), and the air displacement of matched air compressor decreases 30% to 50%.  JK610 is equipped with dust collecting system, and wet type dust collector is optional as long as water is accessible on site.  JK610 is mainly applicable to blasting borehole drilling process of hydro project, open pit mining, quarrying, road construction and defense project. Model JK610 Borehole diameter 90-165mm Borehole depth 50m Applicable rock hardness f=6-20 Working air pressure 1.2-2.4MPa Air consumption 11-21m³/min Feeding stroke 4148mm Rod-changing length 3m Max. horizontal drilling height 3370mm Rotation rate 0-60rpm Rotation torque 3000Nm Travle speed 2Km/h, 3Km/h Grade ability 30° Power Yuchai 70KW Dust collector (optional) Hydraulic dry dust collector Wet dust collector Dimension (LxWxH) 7000mmÃ?2000mmÃ?2500mm Weight 6900kg Wired remote control Optional

Model 180 Weight(Kg) 4500 Dimensions(mm) 2700Ã?1550Ã?2350 Traveling speed(Km/h) 0~2.5 Engine model YC4D08 Power 58Kw/2400rpm Climb capacity(°) 20 Drilling depth(m) 180 Working pressure(MPa) 1.05-2.46 Air consumption(m3/min) 16-30 Length of rod(mm) 2000 Drill bit diameter(mm) Ï?110-202 Feed cylinder stroke(mm) 400 Feed power(N) 25000 Lift power(N) 50000 Speed of rotator(rpm) Min.speed 33 Max.speed 67 Lifting speed(m/min) Min.speed 8 Max.speed 26 Forcing speed(m/min) Min.speed 0-15 Max.speed 51 Rotation torque(N·m) 4200