Mineral Exploration Core Drilling Rig

Brand: HUANYU Model: HY-50H Drilling depth: 0 - 50 meter Weight: 350KG Hole diameter(Soil): 110-200mm Hole diameter(Rock): 75 - 110mm With the HY-50H drilling rig, the hoisting force is increased to 850 kg, which is a greater pulling force. [50 machine high configuration parameters] Drill rod length: 1 meter, 2 meters, 3 meters Cylinder stroke: 600mm Moving machine stroke: 200mm Drill tower height: 4.5 meters Diesel engine power: 8 horses Rock core: 75-110mm (soil layer can be larger) Applicable to: household well drilling, geological survey, drilling, grouting and other engineering projects. Additional: the crawler chassis walking function can be added as needed, which is convenient for moving and reducing labor costs 1. With hydraulic automatic feed mechanism, improve drilling efficiency and reduce physical labor of workers. 2. The ball clamp clamping mechanism is used instead of the chuck, and the lever can be reversed without stopping the machine. The operation is convenient, safe and reliable.

1. Core drilling machine is a medium-shallow hole core drilling machine. It is a vertical shaft core drilling machine which is mainly engaged in diamond drilling and is suitable for various drilling process requirements. It can be matched to the corresponding motor or diesel engine. The rig structure is simple to disassemble and easy to operate. 2. Geological survey exploration, road and high-rise building foundation exploration, various concrete structure inspection holes, river dykes, roadbed grouting hole drilling and direct grouting, civil water wells and ground temperature central air conditioning, etc. 3. The drilling machine adopts automatic telescopic rig, which is supported by two high-strength oil cylinders. A group of hydraulic valves control the rig to sit on the back, which saves time and labor, is safe and reliable, and maximizes the benefits for users. 4. The chassis adopts rubber track, which is light in weight and low in life cycle cost. It can reduce the noise of the vehicle running mechanism, reduce the vibration of the vehicle body, and greatly reduce the fuel consumption. It can walk on urban roads without hurting the road surface. 5. The chassis comes with four high-strength threaded legs (or hydraulic high-legs) installation and adjustment is quick and convenient, can be used for work plane leveling, loading and unloading vehicles to reduce lifting costs and improve efficiency, can be used as an auxiliary support during work.

1. Applications of XYX-130 wheeled hydraulic core drilling rig Geological survey and exploration, basic exploration for roads and high-rise buildings, inspection holes for various concrete structures, river embankments, subgrade grouting holes, direct grouting, civil water well and ground temperature central air conditioners. 2.Features of XYX-130 wheeled hydraulic core drilling rig The drilling rig is equipped with wheeled walking mechanism, which is convenient for the whole machine to move. Also, because of the oil pressure feeding mechanism, the rig improves drilling efficiency. The drilling rig is equipped with a ball card holding mechanism instead of chuck, and it can be operated without stopping the rod. The working efficiency is high and the operation is convenient, safe and reliable. The drilling rig is equipped with pressure gauge so the operatpr will know the bottom hole condition during drilling process. 3.Technical parameters of XYX-130 wheeled hydraulic core drilling rig XYX-130 wheeled hydraulic core drilling rig Drilling depth 130m Max open hole caliber 220mm End hole caliber 75mm Drilling rod diameter 50mm Drilling angle 90°-75° Drill weight 950kg Spindle  Spindle speed 142 285 570r/min Spindle stroke 450mm Windlass Maximum lifting weight of single rope 1600kg Single rope lifting speed 0.41 0.82 1.64m/s Drum diameter 140mm Wire rope diameter 13mm Wire rope capacity 27m Mud pump Type Horizontal single cylinder double action Displacement diesel engine / motor 95/77 l/min Maximum pressure 1.2mpa Work pressure 0.7mpa Drilling depth 130m Max open hole caliber 220mm End hole caliber 75mm

1. Drilling machine full hydraulic drive, easy operation and flexible, easy to shift, good mobility, saving time and effort; 2. Drill rotator with dual hydraulic motor drive, the output torque, greatly improving the drilling rig rigidity; 3. The new angle mechanism makes the hole more convenient, adjust the scope of larger, can reduce the requirements of the face; 4. With a dedicated drill pipe with drill (drill pipe, sleeve, eccentric drill, etc.), in the unstable formation with casing wall openings, conventional ball teeth drill hole; 5. The rig can be directly connected with the hydraulic station, the structure is simple; the hydraulic station frame is equipped with a roller, which is easy to move and relocate. The engine is composed of three parts: host, hydraulic station and console.

Product Introduction 1. Drills up to 100-200m deep, 75-500mm diameter. 2. Full hydraulic system and crawler mounted, easy to operate and move. 3. Drill on soil, sand, rock, quarry, marble and any hard ground. 4. Used to drill for water well, geological exploration, soil sample taking, SPT Test, etc. Main features 1. Hydraulic-control drill mast,can be raised and put down by hydraulic cylinders, which saves time and worker labor. 2. Rubber track, the weight is lighter and does not hurt urban road, suitable for projects in city. 3. Four hydraulic jacks, can lift the machine to mas height 1.3m, so that the machine can be loaded from truck compartment. Also they can be used for rig leveling and support at work. 4. 24V electric-start diesel engine reduces the operator's labor intensity. 5. Independent BW-160 mud pump , has bigger flow displacement and pressure, easy maintenance. 6. Optional installation of hydraulic twist tube machine(75-168mm)imporve work efficiency and reduce labor costs.

Product Description: 1.general investigation, geophysical exploration, high-way and building construction, and blast-hole drilling etc. 2.With hydro-automatic feeding device, and high drilling efficiency. 3.Designed with hydro-chucking unit instead of slips to ensure drilling from stop when changing pipes. 4.Close levers, convenient to operate, safe and reliable operations. 5.Compact in structure. All the drill, water pump and diesel engine installed on one base frame result in space-saving. 6.Light in weight, easy disassembling for transportation and applicable to working conditions in plain and mountain areas. Product Parameter: rated drill depth 200m open hole diameter 200mm, max. 300mm spindle rotation speed 118/236/505/1010 rpm max. output torque 1500 N.m max. lifting weight (single wire) 17 KN drill rod diameter 42/50 mm hole angle 90~75º size (L x W x H) 1433 x 697 x 1273mm weight 500 kg diesel model S1100