Petroleum.
Petroleum.
Petroleum.
Biomass burner, biomass energy plant, renewable energy.
Petroleum oil.
Petroleum.Manufacturer
En590, Jeta1, Pentane C5h12, Liquefied Natural Gas (lng) , Bitumen, Virgin Base Oil Sn500, Oil Bs150, Diesel Ultra Low Sulphur (ulsd 500 Ppm) , Lpg, Light Cycle Oil (lco) , Urea N46, Kazakhstan Mazut M100 Products..
We are supplier and exporter of Bitumen. Bitumen is used in road construction due to various properties and advantages. The bitumen as a raw material in flexible road construction and bitumen as a mix (composing other materials i.e. aggregates etc.) serves certain advantages, that prompt to use bitumen widely in road construction.
Commodity: JET FUEL A1 Origin: Kazakhstan / Non-Sanctioned Minimum Quantity: 1,000,000 Barrels Per Month Maximum Quantity: 6,000,000 Barrel Per Month Shipping Terms: CIF AWSP ( To be acceptable by the Seller ) Price: US$ 82 PER BARREL GROSS and US$ 81 PER BARREL NET. OR NWE PLATT MINUS 10 USD PER BARREL GROSS, AND MINUS 9 USD PER BARREL NET. Inspection: SGS, or equivalent as per Buyer's option Payment method (CIF): By 100% payment for the total value of the product via MT103/TT after successful SGS at Discharge Port. Payment Guarantee By DLC MT700/SBLC MT700 with the value of monthly quantity valid for the contract period. The DLC/SBLC should be Irrevocable, Non- Transferable, Revolving, and Confirmed issued or confirmed by one of top 50 bank Commission: 1 USD PER BBL INCLUDED IN THE PRICE PAID BY SELLER, 50% for Buyer Side and 50% for Seller side (closed) Note - Seller may requests POF from the Buyer if DD indicates So. - Seller will issue the NCNDA&IMFPA After receiving the Buyer's DLC/SBLC.
LPG GAS GOST 20488-90
Maximum : 100,000 MT/Month
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
JET FUEL A1 Spot & Contract FOB basis 80 $ to 83 $ based on quantity Procedure : TANK TO TANK FOB PROCEDURE: 1. Buyer issues ICPO with company letterhead, buyer�¢??s information, passport copy and banking information. 2. Seller issues a Commercial Invoice (CI) and Buyer signs and returns back the Commercial Invoice along with Buyer's Tank storage agreement (TSA). 3. Seller Representative visit the buyer's tank farm for TTM with a copy of the SGS and Injection Report upon verification of the copy of the SGS and Injection report, buyer and buyer's Tank Farm endorse DIP Test Authorization letter seller sends the following PPOP documents: * Certificate of Product Origin. * Letter Of Guarantee. * Statement of availability of product. * Product quality passport (Analysis test Report). 4. Seller issues Complete DTA and Tank Receipt to Buyer, Buyer order SGS to conduct a Dip Test of the product in the Seller's Tank on Buyer expenses submit the full injection report to the Buyer. 5. Upon successful Dip Test, sellers inject the fuel into the buyer lease Storage Tank and sellers submit the full injection report to the Buyer. 6. Buyer makes 100% payment by MT103 TT wire transfer for the total product and the Seller pays the commission to all intermediaries involved in the transaction within 24 hours after confirmation of the buyer's payment. 7. Seller issues draft SPA to the buyer to review for R&E monthly deliveries. 8. Buyer review and approves the SPA and issues DLC MT700or SBLC MT760 irrevocable, non-transferable, auto revolving for 12 months shipment value, Financial Instrument for length of the contract, and for each lift per schedule. Buyer pays after Dip Test by MT103 Wire Transfer each monthly quantity. 9. The subsequent delivery shall commence according to the terms and conditions of the contract. Seller pays commissions to all intermediaries as per IMFPA/NCNDA 24 hours after receiving payment from the buyer.
EQUINAS NBO 60u is a high-quality Naphthenic Base Oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Naphthenic base oil is a type of mineral oil that is produced through the refining of crude oil. It characterized by its composition of saturated cyclic hydrocarbons called naphthene. Naphthenic base oils are used in a wide range of applications, including automotive lubricants, transformer oils, metalworking fluids, rubber and tire manufacturing, and more. They are particularly well-suited for use in applications where low-temperature performance is critical, such as in hydraulic fluids, refrigeration oils, and compressor lubricants
EQUINAS 4 is a high-quality Group III base oil, highly isoparaffinic and exhibits a very high viscosity index as well as superior low-temperature performance. It has an excellent viscosity-volatility relationship. Applications: EQUINAS 4 is an excellent choice for formulating high-performance, low-viscosity engine oils due to its high viscosity index and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines. Features and Benefits: Very high viscosity index Excellent volatility for low-viscosity engine oils Superior low-temperature performance Good oxidation stability
EQUINAS 6 is a high-quality Group III base oil, highly isoparaffinic and exhibits a very high viscosity index as well as superior low-temperature performance. It has an excellent viscosity-volatility relationship. Applications: EQUINAS 6 is an excellent choice for formulating high performance, low-viscosity engine oils due to its high viscosity index and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines. Features and Benefits Very high viscosity index Excellent volatility for low-viscosity engine oils Superior low-temperature performance Good oxidation stability
EQUINAS 8 is a high-quality Group III base oil, manufactured from a unique feedstock by using a proprietary hydrotreatment and wax isomerization process and hydrofinished to a colourless liquid. The base oil is highly isoparaffinic and exhibits a very high viscosity index as well as superior low-temperature performance. It has an excellent viscosity-volatility relationship. Applications: EQUINAS 8 is an excellent choice for formulating high performance engine oils due to its high viscosity index and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines. Features and Benefits Very high viscosity index Excellent volatility for low-viscosity engine oils Superior low-temperature performance Good oxidation stability
EQUINAS NBO 60u High Quality Naphthenic Base Oil EQUINAS NBO 60u is a high-quality Naphthenic Base Oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Naphthenic base oil is a type of mineral oil that is produced through the refining of crude oil. It is characterized by its composition of saturated cyclic hydrocarbons called naphthene. Applications: Naphthenic base oils are used in a wide range of applications, including automotive lubricants, transformer oils, metalworking fluids, rubber and tire manufacturing, and more. They are particularly well-suited for use in applications where low-temperature performance is critical, such as in hydraulic fluids, refrigeration oils, and compressor lubricants Features and Benefits: Low-temperature fluidity: Naphthenic base oil has a low pour point and excellent low-temperature fluidity, making it suitable for use in cold environments. Good solvency: Naphthenic base oil has good solvency, which allows it to dissolve additives and other chemicals that are added to lubricants and other products. Good oxidative stability: Naphthenic base oil has good oxidative stability, which means it can resist degradation caused by exposure to oxygen. Thermal stability: Naphthenic base oil can withstand high temperatures without breaking down or forming deposits. Compatibility: Naphthenic base oil is compatible with a wide range of other materials, including elastomers, seals, and metals. Environmental advantages: Naphthenic base oil is a naturally occurring substance, and its production process generates fewer harmful emissions and waste products than some other types of base oils. Packages size: Available in drums and flexibags Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.
Safety matches, agarbatti, wax matches, candles paraffin wax, slack wax, residue wax.Merchant exporter, importer
Oil & gas products, en590 diesel, jet fuel a1, d6 virgin fuel, petcoke etc, petroleum products, metal commodities like copper cathode & aluminium ingots.Brokering services
