Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
1. carbon black 2. rubber crumb 3. precipitated silica 4. silica quartz ore purity: 98% available, silica quartz powder/purity: 99.9% available, silica lumps purity: 99% available 5. calcium chloride powder 74% cacl2 92% cacl2 94% 6. magnesium chloride flake 7. sodium meta bisulphite (food grade 94 96%) 8. red onion as per your required size. 9. sodium acetate anhydrous 99% sodium acetate trihydrate crystal 99% 10.pet preform & fiber, bottle, flakes, 11.bopp tapes 12. capsicum or bell pepper, ready to eat foods, ready green paste like ginger, garlic paste.We also do logistic work for cif and we have 3rd party facilities like sgs on client chargeable base.
Silver liquid mercury, activated carbon,sodium hydroxide.Exporter
Cerium oxide, chrome flour, carbon, coke powder, red iron oxide, cobalt oxide, aluminum oxide, nickel oxide, lithium carbonate.
, isabgol (psyllium husk) sugar free (stevia powder sachets), castor oil (bulk & packing), perfumes (bulk orders), n95 mask, surgical, chemicals, farsan, fruits & vegetables : seasonal.Manufacturing, exporting & trading
Carbon anode, carbon cathode, carbon cathode powder, used refractory bricks, refractory castable aluminum ingot, aluminium sows.Manufacturer
Bitumen produced by refineries in the Russian Federation, Kazakhstan, and elsewhere, is available for sale FOB or CIF at the best prices. Prices are negotiable for serious big-volume buyers. Buyer's mandate welcome. 30/40 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 40/50 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 50/70 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 60/70 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 80/100 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 85/100 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT 100/120 FOB $300 Gross / $290 Net per MT - CIF $330 Gross / $320 Net per MT
Secondary industrial raw materials such as carbon dust alternative fuel, carbon anodes /carbon anodes butts, cryolite, bath material, mill scale, silica sand, slag, pet flakes, pet bottles and many other..
we can supply activated carbon for gold processing packed in 50kg bags in 40ft containers
Base oil can be obtained from oil or non-oil sources. virgin base oil obtained from crude oil .Since most of the base oil used in the production of lubricants obtained from oil resources. base oil properties of the oil obtained is dependent on the type of crude oil and refining operations. base oil is chemical components during the refining process of crude oil from which it obtained, to inherit. Since crude oil containing different combinations such as paraffinic hydrocarbons, naphthenic and aromatic sulfur compounds are also, base oil are also made up of these compounds. base oil composition comprising a major effect on the properties of spent oils, paraffinic compounds, naphthenic and aromatic
We offer high quality petroleum products (including Russian D2 GasOil, Mazut M100, JP54 Jet Fuel, Jet A-1, D6 Virgin Fuel Oil, EN590, LNG,LPG, Cst180, Light Cycle Oil,REBCO etc). PROMMEKS CJSC is an ultimate global sourcing channel for reliable reliable Allocation holders,title holders, refineries and end sellers. We urge you to contact us for purchase of varieties of products as our returns for over ten years has been impressive and our channels continues to grow due referrals by our customers.
Used rail, aluminum ingot, copper cathode, zinc ingots, sugar ic45, lng, lpg, en590, espo, diesel fuel, lco, bitumen, petroleum coke, sulphur, sulfur, silicon manganese, bauxite, iron ore, copper ore, aluminum scrap, copper scrap, organic fertilizer, butyl tube.
Product Description Crude oil is a naturally occurring, unrefined petroleum product composed of hydrocarbon deposits and other organic materials. A type of fossil fuel, crude oil can be refined to produce usable products such as gasoline, diesel, and various other forms of petrochemicals. It is a� nonrenewable resource, which means that it can't be replaced naturally at the rate we consume it and is, therefore, a limited resource. Price of product ( USD price or FOB price) : USD 220 - 230 per MT Product origin : Russian Key Specifications/Special Features : International Standard Minimum Order Size and Packaging details : 25000 MT
Product Details: Storage : Dry Place Density : 1000 Kilogram per cubic meter (kg/m3) Grade : Industrial Grade Application : Industrial Supply Ability : 2500000 Kilograms Per Month Price And Quantity Minimum Order Quantity : 50 Kilograms Product Specifications Storage : Dry Place Application Industrial Density : 1000 Kilogram per cubic meter (kg/m3) Grade : Industrial Grade Trade Information Payment Terms : Cash in Advance (CID) Supply Ability : 2500000 Kilograms Per Month Delivery Time : 1 Week Main Domestic Market : All India Product Description Industrial Bitumen we offer has multiple uses in industries with wide range of applications. It has all major traits such as plasticity, adhesion, resistance to acids, waterproofing and more. This is an inexpensive as well as safe material to be used in various industries. It is used in construction industry, making roads, roofing and more. The major usage of Industrial Bitumen is in road construction as it is cost effective as well as durable when used with concrete.