Resistance, on one side improve the environment and on the other side improve the product performance and quality.
Materila of polyurethane:bayer ag44v20 22 hk84c1013;basfm20s.
Working steel pipe:not more than dn150, we adopt the20# seamless steel pipe, more than dn200.We adopt q235b spiral steel pipe.
Pre insulated pipe adopts our self designed wear tube device, hydraulic pressure foaming line alarm line pressing machine and other specialized equipments.
We can provide the pre insulated pipe with alarming line as the customer¡¡¥s requirement.Site constructon vehicle is available, the vehicle can generate electricity, sand blast and make high pressure foaming.
Heat shrinkable belt type sleeve joint and electric welding type welding type socket connectors for the pipe joint in the construction site.
Special emulsion and low odor formulation, it is 100% lead free & low voc. Dispose of excess product and containers in a responsible manner without harming the environment.
Application public corridor, staircase, parking, school, hospital and new building or maintenance engineering in interior wall.
Color: white and others is available, also we can adjusting colour for your needs.
Theoretical coverage: 9m²/ time/kg the practical consumption may vary with substrate condition, construction methods, environment and other factors.
e, parking, school, hospital and new building or maintenance engineering in interior wall. Particularly suitable for renovate the loosen old wall coats.
Specification:
Sheen: matt
Colour: white
Theoretical coverage:
8m2/ time/kg(dry film thickness 30 micromete), note: the practical consumption may vary with substrate condition, construction methods, environment and other factors.
Drying time: surface dry: 25min/25¡ãc, hard dry: 48 hours/25¡ãc; recoating: above 2 hours/25¡ãc (drying time will be change because of the different temperature and humidity.)
Packing: 20kg/barrel
Construction condition:
1. 40¡ãc>temperature>5¡ãc.
2. Relative humidity (rh)<85%.
3. Surface humidity <10% .
4. Ph<10.
Shelf life:12 months in sealed cans, away from frost and insolate, the storing temperature shall range 5-35¡ãc.
Please note that:
1. Stir the paint well until homogenous.
2. This product avoid with the polyurethane or mixes in other paint and the powder lot, so as to avoid the phenomenon of yellow.
3. Please make sure the lid tightly closed when not in use to avoid the dust and dirt contamination coating.
Based on emulsion and diversity of natural sand imitate the nature stone, excellent weather resistance and water resistance capability. Natural raw materials nontoxic.
Application:
Applied to residence, hotel, school, office building, landmark of new-built and maintenance engineering of exterior finish. And also widely used in decorate and protect surface of the concrete, cement, brick structure.
Specification:
Sheen: matt & mercerizing
Colour: so many colours for your choise
Theoretical coverage:
0.3m2/time/kg, note: the practical consumption may vary with substrate condition, construction methods, environment and other factors.
Drying time: surface dry: 4hours/25¡ãc, hard dry: 48 hours/25¡ãc; recoating: above 8 hours/25¡ãc (drying time will be change because of the different temperature and humidity.)
Public corridor, staircase, parking, school, hospital and new building or maintenance engineering in interior wall.
Color:
White and others is available, also we can adjusting colour for your needs.
Finish:
Matt
Theoretical coverage:
8 to 10 (m2/kg/coat) note: the practical consumption may vary with substrate condition, construction methods, environment and other factors.
Application method:
Brush, roller, spray
Certificate:
1. Iso9001:2008 2. China environmental certificate
Packing:
20kg/ barrel.
160 m2 to 200 m2/20kg/coat
Moq:
1 ton
Delivery time:
15days after confirm the order
Shelf life:
12 months in sealed cans, away from frost and insolate, the storing temperature shall range 5-35¡ãc
Surface preparation:
1. Remove all loose or powdery paint residue by brushing and scraping with a stiff fiber brush , fill any minor cracks with an appropriate filler, surface should be flat and sanded smooth.
Ature:remove all oil or grease, soluble contaminants and other foreign matter
All surfaces to be coated should be clean, dry and free from contamination
If applied on rusty surface, rusty layer thickness should be below 50mm, other than bottom surface processing requirements, without acid and sandblasting processing, catalytic reaction, to get black protective layer and solvent (acrylic acid, polyurethane, epoxy resin, alkyd resin, amino paint or water-based paint) match well, will not occur and paint color bleeding
Apply in nice weather, don't let coating contact any liquid like water or other solvent before completely dry
No painting be carried out in rainy day outdoor
If above 85% humidity please stop painting
Temperature of substrate should be above 5¡ãc
Lower temperature might not dry or cause long time to dry
•air spray:nozzle orifice range: 1.5 to 2.5mm
Nozzle pressure range: 0.3 to 0.5mpa
•airless spray:nozzle orifice range: 0.4 to 0.5mm
Nozzle pressure range: 12 to 15mpa
•features:brush: use soft brush
Recommended finish: rsl series
Storage temperature: 5 to 30¡ãc in well ventilated warehouse
Stir thoroughly before painting
Don't use any steel or other metal stick to stir paint
Can be applied directly on rusty steel( rust layer ¡ü45um)!
Color and appearance: grey or others
Coating thickness um: 50¡à5mm
Solid content % : 69¡à3%
Overcoating interval: minimum: 4 hours max: unlimited
Recommended substrate conditions and temperature:
1.Remove all oil or grease, soluble contaminants and other foreign matter. All surfaces to be coated should be clean, dry and free from contamination.
2.If applied on the rusty surface, the rusty layer thickness should be below 45 um
3.Apply in good weather, don¡¯t let coating contact any liquid like water or other solvent before completely dry. No painting be carried out in rainy day outdoor , if the humidity is above 85%, please stop painting
4.The temperature of substrate should be above 5¡ãc, lower temperature might not dry or cause a long time to dry
Air spray:nozzle orifice: 1.5-2.5mm
Nozzle pressure: 0.3-0.5mpa
Airless spray:nozzle orifice: 0.4-0.5mm
Nozzle pressure: 12-15mpa
Brush : use soft bursh
Recommended finish: rsl series finish
Shelf life: 12 months
Over coating time
Substrate
Temperature 5¡ãc 15¡ãc 25¡ãc 35¡ãc 45¡ãc
Minimum interval 24hrs 7hours 4hours 3hours 2hours
Maximum interval Unlimited storage temperature : 5-30¡ãc in well ventilated warehouse
Reinforcement filler in elastomers
Rheology and thixotropy control of liquid systems, binders, polymers, etc.
Used as anti-settling, thickening, anti-sagging agent
Improvement of free flow and anti-caking characteristics of powders
High transparency
Aadhya shellac as a leading manufacture , producer, supplier and exporter of shellac, shellac flakes, dewaxed shellac flakes, dewaxed bleached shellac powder, bleached shellac , shellac buttons, seed lac, and other shellac products in india since 2000.
Shellac is being used in fruit coating, french polish, varnish, enteric coatings , food coating , confectionery glaze , tablet coating , medicine coating printing ink , wood polish , surface coating, and many more purpose.
Aadhya shellac as a leading manufacture , producer, supplier and exporter of shellac, shellac flakes, dewaxed shellac flakes, dewaxed bleached shellac powder, bleached shellac , shellac buttons, seed lac, and other shellac products in india since 2000.
Shellac is being used in fruit coating, french polish, varnish, enteric coatings , food coating , confectionery glaze , tablet coating , medicine coating printing ink , wood polish , surface coating, and many more purpose.
Disposable painting-overall with hood
-size s, m, l, xl, xxl
-extremely comfortable with elastic sleeves and trouser legs
-abrasion resistant, hard wearing, antistatic, breathable fabric.
-material is polyester
-zipper on the front, hidden
Protects your walls from fungus and humidity, anti-termite, fire resistant, anti-microbial and anti-bacterial.
Useful for maintaining cleanliness and hygienic atmosphere in restaurants , hotels, ships, office and residential premises.
Kleenkot does not merely inhibit the growth but kills broad spectrum of bacteria on its surface.
Protects surface applications from industrial accidents and operational hazards like fire, corrosion and chemical reactions.
Metalkot is heat and abrasion resistant
Metalkot retains the gloss on the surface.
Protects furnishings, fabrics, curtains, mattress, coir, uphoistery, draping material, carpets etc against fire.
Also useful for clothing
Doesn’t affect the colour, texture and flexibility of the fabric.
The effect of the coating is retained even after dry cleaning.
The equipment adopts the resistance heating in the vacuum chamber, to melt and vaporize the metal wire (aluminum wire) cling to the resistance wire. The vaporized metal molecule deposit on the substrates, to gain the smooth film as well as high reflectivity. Thus the surface of the items can be decorated and beautified.
Characteristic: reasonable structure, even film, good-quality film forming, quick pumping speed, the cycle of short, high efficiency and easy operation, low energy consumption and performance advantages of stability.
Applied industry: Widely used in automotive, audio and various small appliances, computers, clocks and watches, toys, cell phones, reflective Cup, cosmetics, toys, tableware, sanitary ware, shoe heel, ABS, PS, PP, PC, PVC, PET, nylon, metal, Boli, glass, ceramics, TPU, etc.
Electroplating effects: general electroplating-face, dumb-(semi-mute, all dumb), the electroplating process wrinkles, lampworking, raindrops, seven colors
Coating color:gold, silver, red, blue, green, purple, multi color, and so on.
Coating color: gold, silver, red, blue, green, purple, and so on.
All vacuum coating machines are environmental prodection products and sooner or later will replace traditional galvanization industrial.
Technical parameter:
Mode
Dimension
ZZ-1200
ZZ-1400
ZZ-1600
ZZ-1800
1200*1400mm
1400*1600mm
1600*1800mm
1800*2000mm
Mainly Application
Plastic decorative coating , glass decorative coating and protective film coating
Film Type
Semitransparent film, non-conducting film, gold, silver, red, blue, green, purple, seven color, etc.
Power source Type
Thermal evaporation power, ion bombard power, RF power
Vacuum chamber structure
Vertical double/single door, horizontal single door, pump system postposition
Ultimate vacuum
8.0*10-3Pa
Vacuum system
Diffusion pump +Roots pump +Mechanical pump +Holding pump
Pump time
Pump from atmosphere to 5.0*10-2, 6 minutes
Workpiece motion mode
Public rotation/Frequency control
Control mode
Manual/Automatic all-in-one mode, Touching screen+PLC
compress air
the pressure is 5~6kg.
water-cooling system
Cool water 5~25 supplier, the flux is 5T/H and the pressure is 0.15~0.25MPa.
Features
Bright delicate aluminum coating, coating speed, simple operation, equipment stability, and the production of high-grade plastic decoration products indispensable a necessary equipmen
flat container
5549 Paints Coatings Suppliers
Short on time? Let Paints Coatings sellers contact you.
