Optical Windows Optical Components PARAMETER: optical glass Step Windows are latively parallel. They are used to isolate two physical environments while allowing light to pass,it also can be a protection of original when it's in two physical environments.And there is almost no effect on visible light,to coat on the surface of windows could increase the transmittance,the commonly used coatings are antireflection coating (AR) and scratch-resistant coating(AS).Windows with coating can enhance the light penetration strength,and own function of waterproof ,dustproof,and scratch-proof. They are mainly used in mobile phone screen and lens protection,digital camera, digital video recorders, industrial optical windows, touch screen products, GPS products, digital electronic products windows, car rearview mirror, computer screen, laptop screen, watch surface and so on. BRD Optical Provide all types of windows made from different materials. Special size and materials are also available upon request. In addition, we provide a variety of single layer or multiplayer anti-reflecting coating on optical windows. Specification Material Optical glass, Fused silica, Optical crystal Design Wavelength 633nm Focal Length Tolerance ±2%-5% Dimension 5-150mm Dimension Tolerance +0/-0.2mm ~ +0/-0.02mm Flatness 2λ-λ/10 Surface Quality 80/50-10/5 Clear Aperture >85%-95% Bevel 0.3mmÃ?45°-0.1mmÃ?45° Coating As per customers requirement
Prisms Optical Components PARAMETER: Polarizing cube beamsplitters split randomly polarized beams into two otehogonal, linearly, polarized compoments, S-polarized light is reflected at a 90° while P-polarized light is transmitted. Each beamsplitter comsists of a pair of percision high tolerance right angle prisms cemented together with a dielectric coating on the hypotenuse of one of prisms. Polarization Cube Beamsplitter Polarizing cube beamsplitters split randomly polarized beams into two otehogonal, linearly, polarized compoments, S-polarized light is reflected at a 90° while P-polarized light is transmitted. Each beamsplitter comsists of a pair of percision high tolerance right angle prisms cemented together with a dielectric coating on the hypotenuse of one of prisms. High Powe Cube Polarization Beamsplitter High power polarization beamsplitter can be facricated by BRD Optical. Same as the above, it use precision optical contacted technology which makes it has high laser damage threshold. High Damage Threshold>500MV/cm2 Transmission >96% Central Wavelength Extinction Ratio>1000:1 Specification Material Optical glass BK7 / ZF glass Dinension tolerance ±0.1mm Flatness λ/4 632.8nm Surface quality 60/40, 40/20 Angle tolerance 96%, Ts,1% (Narrowband) Tpave > 95%, Ts,1% (Broadband) Principal reflectance Rs>99%, Rp
Optical Components Fused Silica Wedge Prism PARAMETER: The wedge prism is a prism with a shallow angle between its input and output surfaces. This angle is usually 3 degrees or less. Refraction at the surfaces causes the prism to deflect light by a fixed angle. When viewing a scene through such a prism, objects will appear to be offset by an amount that varies with their distance from the prism. Specification Material BK7 glass / Fused silica Surface Flatness: < λ / 10 @ 633nm ~λ/4@633nm Surface Quality: 60/40, 40/20, 20/10, 10/5 (both sides) Dimension Tolerance:
The TCW-605E Series adopt high-speed image processing technology and special precision- positioning technology, automatically finish the whole process of fiber fusion in 8 seconds typically, TFT LCD monitor displays all steps of fiber fusion clear at a glance. Widely used for SM and MM Quartz Fiber with diameter 80-150μm(300μm optional), coating layer diameter0.1-1.0mm and bare fiber length 16mm more or less. Ideal tools for construction and maintenance of fiber and cable in both field and laboratory applications. Support English, Spanish, Portuguese, French, Italian, German, Arabic, Russian, Korea, Japanese, etc.
1)Suitable for 0.25mm bare fiber, 0.9mm buffered fiber, Splice on Connector, Flat FTTH Fiber Cable(Drop Cable),Clamp Change Free(The First, Unique in the world) 2) Button and Menu is same as FSM-60S, in accord with the habit of usage 3) One Step Fiber Cleaver with Automatic Blade Rotation(The First, Unique in China)
Cognex 3D displacement sensors optimize product quality by providing three-dimensional inspection of your products. The sensors are factory calibrated and include industry-leading Cognex machine vision software with powerful 2D and 3D toolsets and a compact, IP65-rated design that withstands even the harshest factory environments. Benefits: Complete 2D and 3D machine vision solution. Results in real-world units (mm). Contrast independent inspection. Ability to combine 3D and 2D cameras. World-class 3D and 2D vision tools. World-class 3D and 2D vision tools.
The Advantage 100 smart camera offers OEMs the ability to leverage the power of Cognex vision and ID tools in an embedded product that is compact (23mm x 44mm x 54mm), flexible but also cost effective. In addition, the Advantage 100 smart camera allows you to tailor optics, lighting and communications for maximum flexibility to meet the specific requirements of your volume OEM integration.
The AE2 Advantage vision engine offers OEMs the ability to leverage the power of Cognex vision and ID tools in a product that is exceptionally compact (14.5mm x 29.1mm x 20.5mm), flexible but also cost effective. Unlike traditional scan engines, the AE2 Advantage vision engine delivers best-in-class 1-D and 2-D code reading, plus a full suite of industry-proven vision tools to locate, analyze and inspect parts or features for embedded vision applications. The AE2 Advantage vision engine is designed for deep integration into OEM products. The AE2 is also delivered with proven and easy to use application software from Cognex.
The In-Sight 5705 series offers high performance with high resolution making it the fastest 5MP self contained vision system in the world. The In-Sight 5705 color follows making it the only standalone 5 MP color vision system in the world! Both systems support Gigabit Ethernet and the new blazing fast PatMax® Redline tool. In-Sight 5705C: True 24-bit color processing True Color Filtering and easy-to-use Color ID and Color Extraction tools make color inspections easier than ever. Setting up and performing color inspections using these tools requires simple selection of a color region and then color training. Faster image filters on an In-Sight 5705 Full image speed is significantly higher with the In-Sight 5705 Series- seven times faster running the closed filter and the edge magnitude filter than a two megapixel system. In practical terms, it’s over half a second faster. This dramatic speed increase reduces cycle times or allows more time for running more detailed inspections.
Features Low insertion loss Wide wavelength range Low crosstalk High stability, high reliability Epoxy-free on optical path Latching and non-latching Application Metropolitan area network R&d in laboratory System monitoring Configurable oadm Parameters Osw-1×2 Wavelength range Nm 650~1310 1260~1670 Testing wavelength Nm 650/780/850/980/1064/1310 1310/1490/1550/1625/1650 Insertion loss Db Typ:0.6, max:1.0 Typ:0.5 , max:0.8 Return loss Db =30 =50 Crosstalk Db =35 =55 Pdl Db =0.05 Wdl Db =0.25 Tdl Db =0.25 Repeatability Db =±0.02 Power supply V 3.0 or 5.0 Lifetime Cycle =107 Switch time Ms =8 Transmission power Mw =500 Operation temperature ? 40~+85 Storage temperature ? 40~+85 Weight G 16 Dimension Mm (l)27×(w)12.6×(h)8.5(±0.2)
Features Low insertion loss Wide wavelength range Low crosstalk High stability, high reliability Epoxy-free on optical path Latching and non-latching Application Metropolitan area network R&d in laboratory System monitoring Configurable oadm Parameters Osw-d1x2 Wavelength rangeNm650~13101260~1670 Testing wavelengthNm650/780/850/980/1064/13101310/1490/1550/1625/1650 Insertion lossDbTyp:0.6, max:1.0Typ:0.5 , max:0.8 Return lossDb=35=50 CrosstalkDb=40 =50 PdlDb=0.05 WdlDb=0.25 TdlDb=0.25 RepeatabilityDb=±0.02 Power supplyV3.0 or 5.0 LifetimeCycle=107 Switch timeMs=8 Transmission powerMw=500 Operation temperature?-40~+85 Storage temperature?-40~+85 WeightG16 DimensionMm(l)27×(w)12.6×(h)8.5(±0.2)
Features Low insertion loss Wide wavelength range Low crosstalk High stability, high reliability Epoxy-free on optical path Latching and non-latching Application Metropolitan area network R&d in laboratory System monitoring Configurable oadm Parameters Osw-2x2 Fiber typeNm MmSm Testing wavelength Nm 630/650/780/850/980/1064/1310 1310/1490/1550/1625/1650 Insertion loss Db Typ:1.0, max:1.3 Typ:1.0 , max:1.2 Return loss Db =30 =50 Crosstalk Db =35=50 Wdl Db =0.25 Tdl Db =0.25 Repeatability Db =±0.02 Power supply V 3.0 or 5.0 Lifetime Cycle =107 Switch time Ms =8 Transmission power Mw =500 Operation temperature ? -40~+85 Storage temperature ? -40~+85 Weight G 16 Dimension Mm (l)28×(w)12.6×(h)8.5(±0.2)
Features Low insertion loss Wide wavelength range Low crosstalk High stability, high reliability Epoxy-free on optical path Latching and non-latching Application Metropolitan area network R&d in laboratory System monitoring Configurable oadm Parameters Osw-2x2b Wavelength range Nm 650~1310 1260~1670 Testing wavelength Nm 650/780/850/980/1064/1310 1310/1490/1550/1625/1650 Insertion loss Db Typ:0.6, max:1.0 Typ:0.5 , max:0.8 Return loss Db =30 =50 Crosstalk Db =35 =50 Pdl Db =0.05 Wdl Db =0.25 Tdl Db =0.25 Repeatability Db =±0.02 Power supply V 3.3 or 5.0 Lifetime Cycle =107 Switch time Ms =8 Transmission power Mw =500 Operation temperature ? -40~+85 Storage temperature ? -40~+85 Weight G 16 Dimension Mm (l)27×(w)12.6×(h)8.5(±0.2)
Features Low insertion loss Wide wavelength range Low crosstalk High stability, high reliability Epoxy-free on optical path Latching and non-latching Application Metropolitan area network R&d in laboratory System monitoring Configurable oadm Parameters Osw-d2x2b Wavelength range Nm 650~1310 1260~1670 Testing wavelength Nm 650/780/850/980/1064/1310 1310/1490/1550/1625/1650 Insertion loss Db Typ:0.6, max:1.0 Typ:0.5 , max:0.8 Return loss Db =30 =50 Crosstalk Db =35=50 Pdl Db =0.05 Wdl Db =0.25 Tdl Db =0.25 Repeatability Db =±0.02 Power supply V 3.0 or 5.0 Lifetime Cycle =107 Switch time Ms =8 Transmission power Mw =500 O i toperation temperature ? -40~+85 Storage temperature ? -40~+85 Weight G 16 Dimension Mm (l)27×(w)12.5×(h)8.2(±0.2)
JX9010 is an optical fiber fusion splicer with a brand new design. With powerful functions and super low splicing loss, it is highly competent for construction of trunk lines and FTTx. Lightweight and compact, it is easy to use even in confined space. The novel fiber imaging system makes the image clearer. The real-time embeded Operating System provides a friendly man-machine interface and abundant functions. According to clients needs.
Handheld OTDR is the newest instrument designed for testing FTTx network According to clients needs.
HR manufactures a wide variety of Prisms. Custom designs including right-angle, equilateral (dispersing), and cube Prisms, dove Prisms, roof Prisms, penta Prisms, and retroreflectors. These Prisms are available in a wide variety of materials, including glass, Germanium, Silicon, ZnSe , ZnS , Fused Silica, Quartz and calcium fluoride. Dimension 2mm to 500mm.
Superintelligent eye screener. With superpowerful AI. AI-Optic combines infrared photorefraction with the Deep Learning Algorithm of Artificial Intelligence. Taking eye scans to a whole new level. Maximum precision.200% more accurate.Artificial Intelligence makes AI-Optic the most accurate handheld autorefractor on the planet. Twice as precise when compared to other handheld vision screeners. Capable of measuring up to desktop devices. Minimum price.Pay 90% less AI completely redefines what an eye screener is and how it is manufactured, reducing production costs dramatically.
United Photonics Technology, Inc.-ISO9001 Company Mirror Mirror is a reflecting surface that forms an image of an object when light rays coming from that object fall upon it. Usually mirrors are made of plate glass, one side of which is coated with metal or some special preparation to serve as a reflecting surface. UPT offers dielectric coated mirrors and metal coated mirrors which are made of substrate such as Bk7, K9, Fused Silica, CaF2, Sapphire. Specifications: Material: BK7 Grade A Optical Glass or other material, Typical Diameter (�¦mm) 8.0, 10.0, 12.7, 15.0, 20.0, 25.4, 30.0, 50.8 Typical Thickness (mm) 2.0, 3.5, 5.0, 6.5 Diameter Tolerance (mm) +/-0.2 (General), +0.0/-0.02 (High Precision) Thickness Tolerance (mm) ±0.2 (General), ±0.05 (High Precision) Clear Aperture >80% (Small Size), >95% (Large Size) Parallelism 6 min. (General), 3 sec. (High Precision) Surface Quality 80/50 (General), 10/5 (High Precision) Flatness (per 25mm@633nm) (General), /10 (High Precision) Bevel (face width x 450)
Penta Prisms / Beamsplitter Penta Prism / Wedge / Right Angle Prisms / Corner Cube Retroreflectors / Anamorphic Prisms / Dove Prisms / Rhomboid Prisms / Reflection Prism / Dispersion Prisms Penta Prisms Penta prism can deviate an incident beam without inverting or reversing to 90.The deviation angle of 90 is independent of any rotation of the prism about an axis parallel to the line of intersection of the two reflecting faces. It is commonly used in Plumb Level, Surveying, Alignment, Range finding and Optical Tooling. The reflecting surfaces of this Prism must be coated with a metallic or dielectric coating. The standard Penta Prism reflecting surfaces are coated with aluminum or enhanced aluminum. Specifications: Material: BK7 Grade A Optical Glass Dimension (mm): 2.5x2.5 ~ 100x100 Dimension Tolerance (mm): +/-0.2 (General), +/-0.05 (High Precision) 90 Deviation Tolerance: 1 arc min.(General),3 arc sec.(High Precision) Angle Tolerance: 3 arc min. (General), 3 arc sec. (High Precision) Surface Quality 80/50 (General), 10/5 (High Precision) Flatness (per 25mm@633nm) (General),/8 (High Precision) Reflection: 90%@400-700nm Note: (1). Besides N-BK7 glass, other optical glass is available for custom-made Penta Prisms. (2). Penta Prism at bigger size is available. (3). Typical deviation tolerance is 1 minute, better precision such as 30 sec, 10 sec, 5 sec or 3 sec is available. (4). Typical reflection is >90% by Al coating, other metal coating such as Ag, Cu, or High Reflection Dielectric Coating is available. (5). Besides uncoating, Anti-Reflective(AR) coating is available upon request. United photonics Technology
