The TCW-605E Series adopt high-speed image processing technology and special precision- positioning technology, automatically finish the whole process of fiber fusion in 8 seconds typically, TFT LCD monitor displays all steps of fiber fusion clear at a glance.
Widely used for SM and MM Quartz Fiber with diameter 80-150μm(300μm optional), coating layer diameter0.1-1.0mm and bare fiber length 16mm more or less.
Ideal tools for construction and maintenance of fiber and cable in both field and laboratory applications.
Support English, Spanish, Portuguese, French, Italian, German, Arabic, Russian, Korea, Japanese, etc.
Techwin Fiber Fusion Splicer TCW-605E www.techwin-china.com We supply fusion splicer similar to Fujikura fusion splicerï¼?Sumitomo fusion splicerï¼?FITEL fusion splicerï¼? INNO fusion splicer, ILSINTECH fusion splicerï¼?FiberFox fusion splicer Not only a Fusion Splicer, but also your partner who make your job easy and happy 5.0 inch TFT color LCD monitor with anti-reflective coating The advanced core to core fiber profile alignment system(PAS) ARC Calibration FREE system ARC Calibration sub-menu included in the Menu too, can do the ARC Calibration by Manual when necessary X/Y axes was displayed or both X and Y were displayed simultaneously, Magnification up to 300 times 8 seconds splicing time, 30 seconds Heat-Shrinking Battery capacity was display in real time, precisely Built-in high capacity battery, support 200 cycles(splicing /tube heating), to meet one days work Long Electrode Lifetime, up to 4000 times The new wind-cover design, enhance the ability to prevent the dust & wind, Max. wind velocity of 15m/s Two Splicing modes: auto, manual Built-in super high-brightness LED supply convenience for night work Auto calculate splicing loss based dual camera cladding axis alignment data Small bulk and light weight, only 2.0kg include battery 4000 results Storage 2.0 USB data interface Compliance with IPx5 standard protection Thermal compartment of turned on manual The software allows the fulfillment of all the functions of the TCW-605E Fusion Splicer, and its updating is guaranteed for a period of 5 years One year warranty( TWO years or THREE years warranty is available for special order) We, Techwin (China) Industry Co., Ltd was established in 1998,focusing on Fusion Splicer, OTDR, Optical Fiber Power Meter,Fiber Light Source, Cable Fault Locator, Optical Fiber Identifier,Visual Fault Locator,Optical Fiber Talk Set, PON Power Meter, Optical Variable Attenuator,Optical Tool Kit,PLC Splitter,Fiber Coupler etc.Our products and Service are exported to worldwide(More than 90 Countries and Regions) and we create USD10,000,000 for our annual sales,and continue the rapid growth all the time.
Techwin Fusion Splicer for maintenance of optic fiber www dot techwin-china dot com We will try our best to provide products similar to Fujikura Fusion Splicer, Sumitomo Fusion Splicer, FITEL Fusion Splicer, INNO Fusion Splicer, ILSINTECH Fusion Splicer, FiberFox Fusion Splicer. How About This Product? The TCW-605E Series adopt high-speed image processing technology and special precision- positioning technology, automatically finish the whole process of fiber fusion in 8 seconds typically, TFT LCD monitor displays all steps of fiber fusion clear at a glance. The Uses: � The TCW605E Series Fusion Splicer have been using in English, Spanish, Portuguese, French, Italian, German, Arabic, Russian, Korea, Japanese, etc. � Widely used for SM and MM Quartz Fiber with diameter 80-150μm(300μm optional), coating layer diameter 0.1-1.0mm and bare fiber length 16mm more or less. � Ideal tools for construction and maintenance of fiber and cable in both field and laboratory applications. Detailed Introduction: � Not only a Fusion Splicer, but also your partner who make your job easy and happy � 5.0 inch TFT color LCD monitor with anti-reflective coating � The advanced core to core fiber profile alignment system(PAS) � ARC Calibration FREE system. ARC Calibration sub-menu included in the Menu too, can do the ARC Calibration by Manual when necessary � X/Y axes was displayed or both X and Y were displayed simultaneously, Magnification up to 300 times � 8 seconds splicing time, 30 seconds Heat-Shrinking � Battery capacity was display in real time, precisely
Fusion splicer of fitel S199M4, fitel S175V2000
Fusion splicer
1)Suitable for 0.25mm bare fiber, 0.9mm buffered fiber, Splice on Connector, Flat FTTH Fiber Cable(Drop Cable),Clamp Change Free(The First, Unique in the world) 2) Button and Menu is same as FSM-60S, in accord with the habit of usage 3) One Step Fiber Cleaver with Automatic Blade Rotation(The First, Unique in China)
Fusion Splicer TCW-605E of Techwin for construction and maintenance of fiber and cable We will try our best to provide products similar to Fujikura Fusion Splicer, Sumitomo Fusion Splicer, FITEL Fusion Splicer, INNO Fusion Splicer, ILSINTECH Fusion Splicer, FiberFox Fusion Splicer. How About This Product? The TCW-605E Series adopt high-speed image processing technology and special precision- positioning technology, automatically finish the whole process of fiber fusion in 8 seconds typically, TFT LCD monitor displays all steps of fiber fusion clear at a glance. The Uses: 1.The TCW605E Series Fusion Splicer have been using in English, Spanish, Portuguese, French, Italian, German, Arabic, Russian, Korea, Japanese, etc. 2.Widely used for SM and MM Quartz Fiber with diameter 80-150m(300m optional), coating layer diameter 0.1-1.0mm and bare fiber length 16mm more or less. 3.Ideal tools for construction and maintenance of fiber and cable in both field and laboratory applications. Detailed Introduction: 1.Not only a Fusion Splicer, but also your partner who make your job easy and happy 2.5.0 inch TFT color LCD monitor with anti-reflective coating 3.The advanced core to core fiber profile alignment system(PAS) 4.ARC Calibration FREE system. ARC Calibration sub-menu included in the Menu too, can do the ARC Calibration by Manual when necessary Technical Specifications: 1.Average Splicing Loss : 0.02dB with G.652 and G.657, 0.01dB with G.651 and 0.04dB with G.653 and G.655 2.Splicing Time : Typical splicing time:8s 3.Heating Time : Typical heating time:30s 4.Return Loss : 60dB or greater 5.Fiber Coating : 100m to 1000m 6.Fiber Cladding : 80m to 150m(300m optional)
Fusion splicer is used for joining two optical fibers end-to-end using heat, to fuse the two fibers together in such a way that light passing through the fibers is not scattered or reflected back by the splice and so that the splice and the region surrounding it are almost as strong as the virgin fiber itself. We has been dedicated to R & D, manufacturing fusion splicer from 2010, and successfully obtained 5 patents for the fusion slicer research. Uniway UW-65H is our latest developed product. It is more concise and smaller in size and has obtained 2 patents for its new technologies. Specification Applicable Fibers: SM, MM, NZ-DS, EDF, Pigtail, Cable (rubber-insulated wire), SC/LC/FC connector (optional function) Average Splice: Loss 0.02dB(SM), 0.01dB(MM), 0.04dB(NZDS), 0.04dB(EDF) Return Loss: â?¥60dB Tension Test: 2.0N(200gf)(Standard) Typical splicing time: 10 seconds Typical heating time: 30 seconds Splicing Program: 50 groups Protection Sleeve: 20mm, 40mm, 60mm Operating Language: English Operating Conditions: -10~+50�°C(operation temperature),0~95% RH(humidity), 0~5000m(altitude) Electrode Life; More than 3500 splices Power Supply: AC adaptor: 100~240V input voltage, 50/60Hz; 12V, 5A output voltage(DC) Inner lithium battery: 11.1V, 6AH for up to 200 splices with heating Monitor: 5 inches high resolution colorful LCD display Fiber Image: X or Y axis Separately views 400 times magnification, or Simultaneously 300 times Storage of Splice Result 6,000 groups of latest splice results Splicing Model: Auto & Manual &Full Auto Dimensions: 130(W)*135(D)*130(H)mm; Package size: 53*32*30cm Weight: 2.21kg+0.37kg (battery weight)=2.58kg; Package G.W.: 8.68kg
Fusion splicer pt-630 Features Fiber core can be display clearly Singlex or y view and x & y view simultaneously Auto check quality of cleaved end face Auto select best splicing program 9 seconds splice time and 30 seconds heat time Small bulk and light weigh 5 inch color lcd monitor with clear digital image display Simple operation menu Software upgrade via usb interface Specification Model Pt-630 Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655) Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬ 16mmú¿coating diameter: 250 ~ 1000ª8mú¬ Fiber diameter Cladding diameterú¦80 ~150ª8m Coating diameterú¦100~ 1000ª8m Fiber count Single Fiber aligning method Core aligning Image processing method Digital Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm), 0.04db (ds), 0.04db( nzds) Splicing time Typical 9 secú¼with standard sm fiber Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss ú+60db Storage of splice result 5000 resultsú¼3 parameter per result Fiber display and magnification 400xú¿x or y viewú¬, 200xú¿x and y viewú¬ Tube heating time Typical 30 sec Tube heating mode 9(templet), 24(user) Tube heating temperature Can be adjusted Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2n Electrode life 2500 No.Of splice/heating with battery Typical 130 cycles (splice/tube heat) with inner li-battery Display screen 5 inch color lcd monitor Image change over The fiber image is turned upside down Terminals Rs 232 Operating condition 0 ~ 5000m above sea level, 0 ~ 95%rh and -10í½50íµ, respectively, max. Wind velocity of 15m/s Power supply Ac 100-240v with ac adapter; inner li-battery(6600mah) Dimensions 150mm(l) x150mm (w) x150mm (h) Weight 2.7 kg excluding battery, 3.2 kg including battery
Fusion splicer pt-650 Features Equel to fujikura fsm-50s, sumitomo type-37 etc Core to core alignment by pas technology ( pas:profile alignment system) Digital fusion splicer with automatic focus function Fiber core can be display clearly Single x or y view and x & y view simultaneously Auto detect cleaved endface fault Display fiber cleaved and offset angle Display core and clad offset 5.6 inch tft color lcd monitor with clear digital image display Usb & vga interface Software upgrade via usb interfac Specefication Model Pt-650 Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655) Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬ 16mmú¿coating diameter: 250 ~ 1000ª8mú¬ Fiber diameter Cladding diameterú¦80 ~150ª8m Coating diameterú¦100~ 1000ª8m Fiber count Single Fiber aligning method Core or clad aligning Image processing method Digital Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm), 0.04db (ds), 0.04db( nzds) Splicing time Typical 9 secú¼with standard sm fiber Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss ú+60db Storage of splice result 4000 resultsú¼20 parameter per result Fiber display and magnification 300xú¿x or y viewú¬, 150xú¿x and y viewú¬ Tube heating time Typical 30 sec Tube heating mode 9(templet), 24(user) Tube heating temperature Can be adjusted Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2n Electrode life 2500
