Seamless
UNS No 2200 : 1/4" to 12"
UNS No 2201 : 1/4" to 12"
UNS No 4400 : 1/2" to 12"
UNS No 6022 : 1/2" to 12"
UNS No 6600 : 1/2" to 12"
UNS No 6625 : 1/2"to 12"
UNS No 8800 :- 1/2" to 12"
UNS No 8020 : 1/2" to 12"
UNS No 8825 : 1/2" to 12"
UNS No 8810 , 8811 : 1/2" to 12"
UNS No 8904 , 8925 : 1/2" to 12"
UNS No 10276 : 1/2" to 12"
In schedule 10S/40S/80S/XXS
Welded
UNS No 2200 : 1/2" to 28"
UNS No 2201 : 1/2" to 30"
UNS No 4400 : 1/2" to 28"
UNS No 6022 : 1/2"to 30"
UNS No 6600 : 1/2" to 30"
UNS No 6625 : 1/2"to 30"
UNS No 8800 : 1/2" TO 30"
UNS No 8020 : 1/2" to 30"
UNS No 8825 : 1/2" to 30"
UNS No 8810 , 8811 : 1/2" to 30"
UNS No 8904 , 8925 : 1/2" to 30"
UNS No10276 : 1/2" to 28
In schedule 10s/40s/80s/XXS
Copper nickel alloy,which has low electric resistance,good heat-resistant and corrosion-resistant, easy to be processed and lead welded.It is used to make the key components in the thermal overload relay,low resistance thermal circuit breaker, and the electrical appliances.It is also an important material for electrical heating cable.It's similar as s type cupronickel.
Copper nickel alloy,which has low electric resistance,good heat-resistant and corrosion-resistant, easy to be processed and lead welded.It is used to make the key components in the thermal overload relay,low resistance thermal circuit breaker, and the electrical appliances.It is also an important material for electrical heating cable.It's similar as s type cupronickel.
Copper nickel alloy,which has low electric resistance,good heat-resistant and corrosion-resistant, easy to be processed and lead welded.It is used to make the key components in the thermal overload relay,low resistance thermal circuit breaker, and the electrical appliances.It is also an important material for electrical heating cable.It's similar as s type cupronickel.
Copper nickel alloy,which has low electric resistance,good heat-resistant and corrosion-resistant, easy to be processed and lead welded.It is used to make the key components in the thermal overload relay,low resistance thermal circuit breaker, and the electrical appliances.It is also an important material for electrical heating cable.It's similar as s type cupronickel.
Copper nickel alloy,which has low electric resistance,good heat-resistant and corrosion-resistant, easy to be processed and lead welded.It is used to make the key components in the thermal overload relay,low resistance thermal circuit breaker, and the electrical appliances.It is also an important material for electrical heating cable.It's similar as s type cupronickel.
Copper nickel alloy,which has low electric resistance,good heat-resistant and corrosion-resistant, easy to be processed and lead welded.It is used to make the key components in the thermal overload relay,low resistance thermal circuit breaker, and the electrical appliances.It is also an important material for electrical heating cable.It's similar as s type cupronickel.
Constantan is a type of resistance alloy, which is made up of copper and nickel as the main components.It has a low temperature coefficient of resistance (TCR), and a wide operating temperature range (below 500). It has good properties on mechanical working, high resistance of corrosion. It is used for variable and strain resistance elements in alternative instruments.
Svamitva Steel is a Manufacturer, Exporter, and Supplier of Nickel 200 Sheets, Plates & Coils in India. Nickel 200 Plates (UNS N02200) are non-ferrous metals with properties like high strength and toughness, first-rate corrosion resistance, and high temperature.
ASTM / ASME SB 564 UNS 2200 ( NICKEL 200 ) , UNS 4400 (MONEL 400 ) , , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) , UNS 6601 ( INCONEL 601 ) , UNS 6625 (INCONEL 625) , UNS 10276 ( HASTELLOY C 276 )
ASTM / ASME SB 160 UNS 2201 (NICKEL 201 )
ASTM / ASME SB 472 UNS 8020 ( ALLOY 20 / 20 CB 3 )
Copper Alloy
ASTM / ASME SB 61 UNS NO. C 92200 & ASTM / ASME SB 62 UNS NO. C 83600.
ASTM / ASME SB 151 UNS NO. 70600 , 71500 , C 70600 ( CU -NI- 90/10) , C 71500 ( CU -NI- 70/30) ,ASTM / ASME SB 152 UNS NO C 10100 , C 10200 , C 10300 , C 10800 , C 12000, C 12200.
ASTM / ASME SB 111 UNS NO. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500.
ASTM / ASME SB 466 UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30)
OD: 10 - 325mm
WT: 1.0 - 30mm
Length: up to 12m
Application: Chemical, Petrochemical, Energy, Aerospace, Oil and Gas, Nuclear industries.
Process method: Cold drawn, Cold rolling
Finishing: Heat treatment, annealed, acid washing, manual and mechanical
Chemical Analysis of Alloy 400(UNS NO4400) ASME SB127/AMS 4544
C Mn P S Si Cr Ni Mo Cu Co Cb+Ta Fe
3Max 2.0Max .02Max .024Max .5Max 63Max 28-34 2.5Max
Chemical Analysis of Alloy 600(UNS NO6600) ASME SB163/ASME SB516(inconel 600) W Nr2.4816
C Mn P S Si Cr Ni Mo Cu Co Cb+Ta Fe
.15Max 1.0Max .015Max .5Max 14-17 72Min .5max 6-10
Chemical Analysis of Incoloy800HTASME SB407 ASME407 ASME SB163
C Cr Ni Ti Al Fe Al+Ti Grain
0.06-0.1 19-23 30-35 0.15-0.6 0.15-0.6 39.5Min 0.85-1.2 5 or coarser
Inconel 600 is a nickelbase alloy with excellent carburization, and good oxidation resistance at elevated temperatures.
The alloy is widely used in the heat treating industry.
600 alloy has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures.
Alloy 600 is not suggested for use at red heat when sulfur is present due to elevated nickel quantities.
Grades 200 and 201 nickel are normally preferred for handling concentrated, high temperature caustic.
However, when sulfur compounds are present as well, or for ammonium hydroxide service,
600 alloy is suggested. 600 alloy is subject to stress corrosion cracking in hot, concentrated caustic alkalies.
To avoid stress corrosion cracking, the 600 alloy fabrication should be fully stress relieved prior to use.
A minimum treatment of 1650°F for 1 hour is suggested, but 1800-1850°F for 1 hour preferred.
Name Nickel Sheet / Nickel Plate
Standard ASTM, ISO, JIS, GB
Material Ni200, Ni201, Inconoly, Inconel, Hastelloy etc.
Dimension THK 0.5 ~ 60mm * W=2000mm * L= 8000mm
Condition Annealed
Application Chemical Industry, Petroleum Industry, Nuclear Power Industry, Marine Industry, Electrolytic Industry etc.
Certificate ISO 9001:2008, MTC or The Third Party
Name Nickel Bar / Nickel Rod
Standard ASTM, ISO, JIS, GB
Material Ni200, Ni201, Inconoly, Inconel, Hastelloy etc.
Dimension Dia. 6 ~ 200 mm
Condition Annealed
Application Chemical Industry, Petroleum Industry, Nuclear Power Industry, Marine Industry, Electrolytic Industry etc.
Certificate ISO 9001:2008, MTC or The Third Party
Nickel alloy Instrumentation fittings are formed from nickel alloys, which are metals made by combining nickel with another substance as the primary constituent. It mixes two materials to produce improved properties such as greater strength or corrosion resistance. Because of its particular characteristics, it's employed in a wide range of equipment across a wide range of sectors. Nickel alloy is made by combining nickel with other metals such as titanium, copper, aluminum, iron, and chromium.
Nickel alloy instrumentation fittings are more resistant to corrosion at temperatures above 1800 F. This makes them excellent for usage in harsh environments. Nickel alloy instrumentation fittings are resistant to oxidation and corrosion at high temperatures. Nickel alloy instrumentation fittings are very ductile and have high melting temperatures. They can be electroplated and welded readily, making them excellent for sectors that deal with extreme heat and cold.
Nickel alloy instrumentation fittings can be put to use for approximately 25 to 35 years. It can survive for an even longer period of time depending on the application. Because of its extended service life, this metal is less expensive than other metals
Nickel alloy instrumentation fittings are utilized in a wide range of applications due to their qualities, including food preparation equipment, medical equipment, laboratory equipment, aircraft, pharmaceuticals, building materials, aircraft and power turbines, nuclear power systems, and so on.
Specification of Nickel Alloy Instrumentation Fittings
Imperial Size 1/2 to 2
Size 1/16 OD to 2 OD, 2mm OD to 50mm OD
Thread NPT, BSP, BSPT, UNF, ISO, SAE, MS, AN, weld ends etc.
Pressure Rating 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass
Temperature Ratings Up to 1000F (537C)
Types Tube to Union, Tube to Male, Tube to Female, Instrument Pipe Fittings, Accessories
Application Power/ gas/ petroleum/ chemical/ metallurgy/ shipbuilding etc.
Our service
Nace Mr 01 75
Sour Service
Impact Test As Per Ug 84
Macro Structure Analysis
Hydrogen Induce Cracking Test (Hic)
Sulphide Stress Cracking Test (Sscc)
Cryogenic Services (Cryo),hydrogen Services (H2)
Helieum Leak Test
Dye Peniterant Test (Dp)
Magnetic Partius Test (Mp)
Post Weld Heat Treatment (Pwht)
Ultrasonic Test (Ut)
Hydro Test, Etc.
Test Certificates
EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Production Technique Forged/ Heat treated and machined.
