Power Rating : 40KVA Electric Power: 32KWE Rated Current: 55.65 Amp Engine Model: AL4CTDG1 Engine Power rated : 39 KW (52.28 HP) No. of cylinders: 4 Piston displacement: 4 Liters Fuel tank capacity: 140 Ltr Battery capacity: 90 AH Size (LXW): 2500mm X 1100mm Net Weight: 1075 Kg
Power Rating : 20KVA Electric Power: 16KWE Rated Current: 22 Amp Engine Model: AL2CTIDG1 Engine Power rated : 18.7 KW (25.4 HP) No. of cylinders: 2 Piston displacement: 1.915 Liters Fuel tank capacity: 55 Ltr Battery capacity: 90 AH Size (LXW): 2000mm X 900mm Net Weight: 676 Kg
Input Voltage240 V: 415 V Input Phase: 3 No Input Frequency: 60 Hz Output Open Circuit Voltage: 89 V Welding Current Range: 20- 500Amp
Input Voltage240 V: 240 V Input Phase: 1 No Input Frequency: 50 Hz Output Open Circuit Voltage: 71 V Welding Current Range: 10- 200Amp
Length of the bed : 4.5 Ft 12 Ft Width of the bed: 240 mm- 375 mm Height of centre: 170 mm 300 mm Swing Over Cross Slide: 180 mm 390mm Swing Over Bed: 340 mm 600 mm RPM: 60 1025 to 30-1050 18 H-L Admit Between Center: 600 1500/2500 No. of Spindle speed: 8 Cross Slide Travel: 175 -375 Top Slide Travel: 125- 175 With Worth Threads TPI: 2-30 Lead Screw: 4 TPI Main Motor: 1.5 kw 3.7 kw
Length of the bed: 6½ Ft 14Ft Width of the bed: 375 mm- 550 mm Height of centre: 300mm 500 mm Swing Over Cross Slide: 325 mm 630mm Swing Over Bed: 600 mm 1000 mm Swing in Gap: 865 mm 1400 mm Admit Between Center: 1000 mm -3000 mm No. of Spindle speed: 8 Spindle Hollow: 65 mm 103mm No of Feeds: 30 With Worth Threads TPI: 2-30 Electric Motor RPM: 3*1440,5*1440,7.5*1440
Length of the bed: 1828 mm 3657mm Width of the bed: 350 mm- 600 mm Height of centre: 300mm 550 mm Swing Over Slide: 430 mm 863mm Swing in Gap: 914mm 1473mm Admit Between Centers: 838mm -2363mm Spindle Hollow: 53mm 103mm Type of Bed: Pedestal Hp.Required: 2*960,3*960,5*960
Surface of Table: 32 x 7 - 60x12 No. of TEE slots: 3 Vertical Travel: ½ 5/8 Swivel of table: 450 Longitudinal Transverse: 15 30 Cross Transverse: 6 10 Vertical Transverse: 13 -22 Taper of spindle: ISO -40 RPM of spindle: 50-750 No of spindle speed: 7-9 Weight Approx: 500kg 2050kg
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
