Name: Magnesium Chloride Anhydrous CAS Number: 7786-30-3 Pubchem: 24584 EC No.: 232-094-6 Properties: Molecular Formula: MgCl2 Molar Mass: 95.211 g/mol Appearance: white or colorless crystalline solid Boiling Point: 1412 C Solubility in water: Temp. 20 C 54.36 g/100ml Temp. 100 C 72.6 g/100ml. 25kg or 50kg in a PP bag or as clients' request.
Aluminium alloy
Aluminium flagpole
Aluminum alloy
Aluminum alloy
Machining titanium alloy Export wood cases package.
Aluminum magnesium alloy powder Specification: Mg: 50% +/- 2% Al: 50% +/- 2% Mg+al: 97% min Fe: 0.2% max Si: 0.25% max P: 0.01% max S: 0.01% max Size distribution 60-200mesh Packaging:25kg plastic bag packaging or cardboard cylinder packaging 200kg/50kg iron drum with lined plastic bags packaging. As to the specification and packaging, we can make according to the client's request. 25kg plastic bag packaging 200kg/50kg iron drum.
Name: Magnesium Chloride Anhydrous CAS Number: 7786-30-3 Pubchem: 24584 EC No.: 232-094-6 Properties: Molecular Formula: MgCl2 Molar Mass: 95.211 g/mol Appearance: white or colorless crystalline solid Boiling Point: 1412 C Solubility in water: Temp. 20 C 54.36 g/100ml Temp. 100 C 72.6 g/100ml With plastic bag per 25kg then with Jumbo bags or as clients' request.
Granularity: 0.83mm - 25.4mm Color: Grey & shining Packing: with plastic bags & barrel Delivery Time: within 15 days for one 20ft full container. WITH plastic bags inside and barrel outside or as clients' request.
Ferro alloys
High quality, low price.
Ferro alloys, sponge iron, iron scrap Ferro silicon, silico manganese
Advantages: * High density (17.0~18.5g/cm3). * Good machinability. * Good mechanical properties * High modulus of elasticity * High absorption capacity against x-rays and v-rays * Harmless to the health and environment.Applications: * Protection shields for nuclear radiation * Balancing weights * Substitutional material for Uranium * Electroheat upsetting anvil block * Balls in bomb. * High voltage electrical contact * Electrodes for Resistance WeldingProduct Standard: ASTM B 777 99.
Advantages: * high density (17.0~18.5g/cm3). * good machinability. * good mechanical properties * high modulus of elasticity * high absorption capacity against x-rays and v-rays * harmless to the health and environment.Applications: * protection shields for nuclear radiation * balancing weights * substitutional material for uranium * electroheat upsetting anvil block * balls in bomb. * high voltage electrical contact * electrodes for resistance weldingproduct standard: astm b 777 99 . Export cartons
1. Hms1&2 scraps over 10, 000 mt cnf prices. 2. Port : Inchon in Korea 22, 000 m.T
Cube2--C17200 (CDA 172) Beryllium Copper is the most commonly utilized Copper Beryllium alloy and is notable for its highest strength and hardness compared to commercial copper alloys. C17200 alloy contains appr. 2% of beryllium and achieves its ultimate tensile strength can exceed 200 ksi, while the hardness approaches Rockwell C45. Meanwhile, the electrical conductivity is a minimum of 22% IACS in the fully aged condition.C17200 also exhibits exceptional resistance to stress relaxation at elevated temperatures. International Specification: Rods/Bars/Tubes: ASTM B196,251,463; SAE J461,463; AMS 4533,4534,4535; AMS4650,4651; RWMA Class 4 Strips:ASTM B194, AMS4530,4532; SAE J461,463 Sheets: ASTM B194 Wires:ASTM B197, AMS4725, SAE J461,463 Plates:ASTM B194, SAE J461,463; AMS4530,4533,4534,AMS4650,4651; RWMA Class 4. European Standards: CuBe2, DIN 2.1247, CW101C to EN Note: ASTM: American Society for Testing and Materials SAE: Society of Automotive Engineers AMS: Aerospace Materials Specification (Published by SAE) RWMA: Resistance Welder Manufacturers' Association Note: Unless otherwise specified, material will be produced to ASTM. Available Sizes: Custom Diameter & Sizes, Random Mill lengths Available Products (forms): Round bars, Round strips, Round wires, Round tube, Flat bars, Square bars, Rectangular bars, Hexagon bars, Plates, Sheets, Coils Custom shapes are available upon request. Chemical Composition: Be: 1.85-2.10% Co+Ni: 0.20% Min. Co+Ni+Fe: 0.60% Max. Cu: Balance Note: Copper plus additions equal 99.5% minimum Typical Physical Properties: Density (g/cm3): 8.36 Density before age hardening (g/cm3): 8.25 Elastic Modulus (kg/mm2 (103)): 13.40 Thermal Expansion Coefficient (20 ípC to 200 ípC m/m/ípC): 17 x 10-6 Thermal Conductivity (cal/(cm-s-ípC)): 0.25 Melting Range (ípC): 870-980 Note: 1). the units are based upon Metric. 2). the typical physical properties apply to age hardened products.
CuCo1Ni1Be--CW103C (DIN 2.1285) Cobalt Nickel Beryllium Copper Alloy contains approximately 1% Cobalt, 1% Nickel and 0.5% Beryllium. After hot forging and heat treatment processes this material gains considerably hardness, electrical and thermal conductivity as well. It is possible to have different combinations of electrical conductivity and hardness by changing the heat treatment conditions;CuCo1Ni1Be also Offers good strength and hardness characteristics coupled with conductivity in the range of 45-60 percent of copper with ultimate tensile and hardness properties approaching 140 ksi and RB 100 respectively, all of its properties are quite the same as CuCo2Be-C17500 and CuNi2Be-C17510. International Specification: Rods/Bars/Tubes: ASTM B441, SAE J461,463; RWMA Class 3 Sheets: ASTM B534 Wires: ASTM B441 Plates: ASTM B534, SAE J461,463; RWMA Class 3 European Standards: CuCo1Ni1Be, DIN 2.1285; CW103C to EN Note: ASTM: American Society for Testing and Materials SAE: Society of Automotive Engineers AMS: Aerospace Materials Specification (Published by SAE) RWMA: Resistance Welder Manufacturers' Association Note: Unless otherwise specified, material will be produced to ASTM.
CuCrNi2Si ¿C UNS.C18000 Copper Chromium Nickel Silicon Alloys, which also called Beryllium Free Copper alloy, meets the mechanical requirements of RWMA Class 3 Copper, is a very hard heat treatable copper based alloy with an economical higher strength and high conductivity, and C18000 Alloys is utilized when a combination of very good mechanical strength along with moderate electrical and thermal electrical conductivity are required. Furthermore, C18000 alloy is an excellent substitute for copper beryllium alloys C17500 and C17510 in terms of many applications. International Specification: Rods/Bars/Plates/Sheets: UNS.C18000, CDA180, RWMA Class 3 European Standards: CuCrNi2Si, DIN 2.0855, CW111C to EN Note: ASTM: American Society for Testing and Materials RWMA: Resistance Welder Manufacturers' Association Note: Unless otherwise specified, material will be produced to DIN & RWMA.
Cube2--c17200 (cda 172) beryllium copper is the most commonly utilized copper beryllium alloy and is notable for its highest strength and hardness compared to commercial copper alloys. C17200 alloy contains appr. 2% of beryllium and achieves its ultimate tensile strength can exceed 200 ksi, while the hardness approaches rockwell c45. Meanwhile, the electrical conductivity is a minimum of 22% iacs in the fully aged condition.C17200 also exhibits exceptional resistance to stress relaxation at elevated temperatures. Available sizes: Custom diameter & sizes, random mill lengths International specification: ú¿¦·+O¦µ+¦ú¬ Rods/bars/tubes: astm b196, 251, 463; sae j461, 463; ams 4533, 4534, 4535; ams4650, 4651; Rwma class 4 Strips:astm b194, ams4530, 4532; sae j461, 463 Sheets: astm b194 Wires:astm b197, ams4725, sae j461, 463 Plates:astm b194, sae j461, 463; ams4530, 4533, 4534, ams4650, 4651; rwma class 4. European standards: cube2, din 2.1247, cw101c to en Note: Astm: american society for testing and materials Sae: society of automotive engineers Ams: aerospace materials specification (published by sae) Rwma: resistance welder manufacturers' association Note: unless otherwise specified, material will be produced to astm. Plywood cases/plastic pipes/wooden cases
Light metal scrap of alumium cans. 20 Feet Container (20 Ton)
