Aluminum magnesium alloy powder
Specification:
Mg: 50% +/- 2%
Al: 50% +/- 2%
Mg+al: 97% min
Fe: 0.2% max
Si: 0.25% max
P: 0.01% max
S: 0.01% max
Size distribution
60-200mesh
Packaging:25kg plastic bag packaging or cardboard cylinder packaging
200kg/50kg iron drum with lined plastic bags packaging.
As to the specification and packaging, we can make according to the client's request.
25kg plastic bag packaging
200kg/50kg iron drum.
?item:aluminum magnesium alloy powder ?production process:dry ball mill production ?application:for welding industry and fireworks ?export packing:20kg per fiber drum or iron drum(370mm*480mm)
Supplier: Aluminum powder, aluminum magnesium alloy powder
Particle: 10-400mesh (2mm-0.0035mm) Magnesium content: above 99.5% Active magnesium: above 98.5% Impurities: Zn: nmt 0.1% Fe: nmt 0.2% Ca: nmt0.15% Mn: nmt1.0% Cl: nmt0.005% H2o: nmt 0.1% Insoluble substances in hcl: nmt0.2% Other metals: nmt0.5% Loose density: 0.35-0.75g/cm3. Magnesium powder is inflammable and explosive. It gives out temperature and dazzling white light when burning. So it's been widely used in military aerospace and other scientific and technological fields. Because of its active chemical characteristic, magnesium is usually used in metallurgy industry: it is used as dioxidizing agent and purifying agent in steelmaking and non-ferrous metal casting, and as dehydrating for organic compounds. Magnesium powder can also be used directly for organic compounds of magnesium. Especially in recent years, magnisium has been used more and more in spray coating and preservation industries. It is also used a lot in monocrystalline silicon directly olycrystalline silicon producing and metallurgy powder die-casting industry. 100kg/drum
Supplier: Aluminum powder, aluminum magnesium alloy powder
Services: OEM, Export
A unique product of Aluminum briquettes made from aluminum turning Aluminum contain 90% above.
Cast aluminum-magnesium alloy Category:Aluminum alloy casting Cast Aluminum-magnesium alloy are widely used in the fields of electronics, automobiles, and aerospace. Common grades are 7A09 etc. The main elements of aluminum-magnesium alloy include aluminum and magnesium. The alloy products have high strength, low density and strong heat dissipation capacity, so they are popular in the fields of electronics, automobiles, and aerospace. Common grades are 5052, 5754, 5083, etc. Aluminum alloys have lower cost, superior performance and stronger product competitiveness. The density of aluminum-magnesium alloy is small, so it is lighter under the same volume, and has a certain strength, which can be used for load-bearing. Aluminum-magnesium alloy has strong heat dissipation, and at the same time, it can resist electromagnetic interference and has strong electromagnetic shielding. Its appearance has a certain degree of beauty, is resistant to corrosion, can maintain a good quality of appearance for a long time, and the material is environmentally friendly, and the waste is recyclable.
Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
Supplier: Bonny light crude oil (blco), yemen light crude oil, jet fuel, diesel d2, d6, mazut, base oil, gasoline, cocoa bean and powder, petroleum products, coal, diesel, bitumen, petcoke, aluminum, hms, charcoal, wheat, sugar, milk, soybean, corn, beef, chicken, flour, meal, rye, frozen vegetable, okra, french fries, etc.
Services: Procurement, exporter
We are involved in offering excellent quality Aluminium Ingot to our most valued clients. Various Grade and Shapes: U Shape, Aluminum Notch Bar, Aluminum Ingot, Aluminum Cubes, Aluminum Shots, Aluminum Alloys Al purity from UBC grade : 95%, 96%, 97%, up to 98% with original of Vietnam. Yard Visit:highly recommendation. We can produce as per your specification. Please contact us if you have any request.
