Radifocus Guidewire M Standard type is a Nitinol hydrophilic guidewire covered with polyurethane containing tungsten and a hydrophilic polymer coating (M Coat) for complete, low friction maneuverability. Indicated for use for standard angiography in coronary and peripheral territories, catheterization, embolization, peripheral angioplasty and stenting (with or without an exchange wire), and subintimal angioplasty in small, standard or large proximal or distal vessels.
Product Description: 1. Commodity: Unused rails way 2. Total quantity: 3,000,000 MT (Three Million Metric Tons)/ we can supply any requested quantity 3. Delivery per month: Start from 250,000 MT up to 500,000 MT monthly 4. Origin: Saudi Arabia 5. Product: Railway R50/ R65 6. Size: See attached the Technical specification â?? HMS-2, RAILS R50, R65â?? 7. Price: 300US DOLLARS PER MT (THREE HUNDRED DOLLARS). Including commission 20USD from Buyer through IMFPA. 8. Destination port: Any safe port destination, C&F/ASWP 9. Packing: Break Bulk 10. Inspection: In loading port by SGS or other reputed agency by Sellers expense. In discharging port by SGS or other reputed agency by Buyers expense. SECOND QUALITY (UNUSED) - RAIL WAY RAIL STEEL NO. 1. STANDARD SECTION TEE RAILS, ORIGINAL WEIGHT 50 POUNDS PER YARD, OVER HEAVIER, 120.50 M RAILS. STEEL NO. 2. CROPPED RAIL ENDS, STANDARD SECTION, ORIGINAL WEIGHT 50 POUND PER YARD AND OVER 12.50 METERS LONG.
Product Description: 1. Commodity: Unused rails way 2. Total quantity: 3,000,000 MT (Three Million Metric Tons)/ we can supply any requested quantity 3. Delivery per month: Start from 250,000 MT up to 500,000 MT monthly 4. Origin: Saudi Arabia 5. Product: Railway R50/ R65 6. Size: See attached the Technical specification â?? HMS-2, RAILS R50, R65â?? 7. Price: 300US DOLLARS PER MT (THREE HUNDRED DOLLARS). I 8. Destination port: Any safe port destination, C&F/ASWP 9. Packing: Break Bulk 10. Inspection: In loading port by SGS or other reputed agency by Sellers expense. In discharging port by SGS or other reputed agency by Buyers expense. PER YARD, OVER HEAVIER, 120.50 M RAILS. STEEL NO. 2. CROPPED RAIL ENDS, STANDARD SECTION, ORIGINAL WEIGHT 50 POUND PER YARD AND OVER 12.50 METERS LONG. (28B) (28C) RAIL â?? STEEL NO.2 T â?? RAIL ENDS STANDARD SECTION â?? ORIGINAL WEIGHT 50 POUNDS PER YARD AND OVER 12.50 POUNDS PER YARD AND OVER 12.50 METERS â?? RAIL, STEEL NO.3, STANDARD SECTION FEE, GENDER, AND/OR GUARD RAILS, FREE FROM FROG AND SWITCH RAILS NOT CUT APART, AND CONTAIN NO MANGANESE, CAST, WELDS OR ATTACHMENT ANY KIND EXCPET ANGLE BARS ALSO RAILS, NOT FOUND AND WITHOUT RADIATION AND EXPLOSIVE SUBSTANCE 1.0M (1.0â?? 1.5M) RAIL FERROUS
Commodity: Un-used rail, secondary grade, R50 (Gost-7173-75) and R65 (Gost-8165-75) â?¢ Lengths: From 0.9 to 12.5 meters, cut in any lengths at buyer choice Total Quantity: >5,000,000 Mt (Two million metric tons) â?¢ Origin: Saudi Arabia â?¢ Price and Shipment Type: CIF to any port in the world at $160/MT Shipment Delivery Schedule: Proposed schedule is 200,000 MT/Months X 10 Months. It must be noted that maximum shipment size is 500, 000MT/Month, while minimum shipment size is 50,000MT/Month. However, details of shipment will be agreed upon and reflected in the contract. The payment: 100% LC MT700 Confirmed, at Sight, Irrevocable, non-transferable for the total LC value for the whole amount of 5 Million MT. However, revolving LC MT700 can be opened only with 20% " Negotiable as agreement "of the Total Value, but only on the Condition that the Buyer's Bank Guarantees the Total Value and accepted by Seller) Performance Bond: 2% by seller as Bank Guarantee after Establishing LC. Warehouse Visit/Preview: If the buyer desires to visit the warehouse or see Proof Of Product - POP documents, videos, photos...etc., it is required to open (before came) only MT705 from buyer bank to seller bank within 48 Hrs. MT705 does not hold Buyer for commitment to Seller for whole amount, which is required to assure the Seller of Buyerâ??s financial resource capability to commence the deal. â?¢ Inspection: SGS or any Equivalent as per the signed contract. Commercial Invoice (CI): CI shall be issued at Buyer expense for a cost of $2700 in order to preserve the desired quantities for specific period of time (14 days). However, Seller will return this CI amount to Buyer once LC- MT700 is issued. The CI is a reference required for LC MT700 and/or MT705 issuance per Saudi Banking System regulations. Note, the seller will provide commitment letter to return the CI amount, mentioned in the contract, and can be added to LC-MT700 conditions terms to ensure Buyer of retuning the CI amount. Deal Procedure: Will be sent upon agreement.
we can supply every month tonnage quantity R50-R65 & HMS 1&2 80/20. For detail please share your requirement.
Nano Wings Pvt Ltd offers 100% water dispersible nano silver in powder form.The material is based on our innovative proprietary technology "nano Ag cookies'. Once dispersed the material has 100% compatibility with isopropanol. In the dispersion form the nano silver exhibits below properties. Average Particle Size (in water dispersion) APS: 42 nm (PSD histogram) Silver Content 6.25 w%. Therefore 1 kg of material offers 65000 ppm of nano silver concentration. Crystal Structure: FCC Crystallite size: 10-30 nm Phase purity: >99.5% pH: value 7 Surface treatment: YES Zeta potential (in water dispersion): -33.5 mV UV absorption peak maxima: 435 nm Applications: Our material in combination with hydrogen peroxide can be used in aquatech, water treatment as an effective antimicrobial agent. It can also be employed in water based paints
We offer nano silver (Ag) in powder form Appearance: Gray or cream colour powder Shape: spherical Average Particle Size APS: 50-150 nm (SEM) & APS: 20-80 nm (TEM) Crystallite Size: 10-20 nm (as per PXRD) Crystalline Phase: FCC (face centered cubic) Purity: 99.99 w% (as per ICP-MS data) pH value: 7-8 Surface treatment: YES Applications: Our material can be used in the preparation of conductive inks, antimicrobial coatings for textiles, various surfaces and composites etc
Hr cut pieces is scrap material of end part of a iron sheet which used mainly by furnace.
We specialize in automotive metal stamping dies design and manufacturing. Our main business is for small to middle size progressive dies, transfer dies and single stations dies building. Especially for car roofs, seats and battery support brackets. With more than 15 years experience of die analysis, design,machining, assembly and tryout, every detail was strictly under control from quotation analysis and manufacturing to tooling final buyoff. Main Advantages: 1. Refining team with 53 people, reaction flexible, messages communication fast, short lead time. 2. Tryout press with 1000 ton (5000*2000mm), 400 ton, table size 3200*1400mm and one 200 ton press could be able to build a lot of middle size tools. 3. Charming management cost. 4. Located in a convenient city Dongguan area where close to Shenzhen port, international airport of Guangzhou, Shenzhen and Hong Kong.
Our stock ready at our Ethiopia & Somaliland mines are as under; Also able to enter into 12 months long term contract; 1. Manganese ore 10000 Mt ready stock 2. Nickel ore 200 mt ready stock duly inspected. 3. Chromite ore 2000 mt ready stock 4. Lead ore under production 5. Copper ore 2000 Mt ready stock. 500 MT is ready duly inspected Also 6. HMS1 (80 to 90%) HMS2 (10 to 20%) 100000 MT stock. Each month can supply 10000 MT by container load. 7. Dry lead batteries 3000 Mt ready stock. After 3000 Mt, each month can offer min 500 to 600 MT. Let us know your interest to import with qty & destination port to enable us to submit more details.
Name: R50, R60 Rail Production: 50,000 tons per month Payment method: L / C payment Find buyers from all over the world,
Material: Stainless steel spouts with rubber stoppers Size: 106x19x5mm Weight: 14g Color: As picture MOQ: 200pcs Sample time:5-7 days Packing: 1pcs/opp bag Features: Lightweight and portable. Durable and practical.
Item: Smart Key Holder Material: Aluminum, Copper Size: Small - 9.0*2.1*1.7cm Large - 9.0*3.1*1.7cm Package: Original Gift Box
We are always looking for recycling partners in India who buy, metals such as aluminum, steel and copper for recycling. We have lot metals Available for recycling. We are USA based company looking for buyer in India.
Frontline Workhorse guide wires are designed to be flexible, have a soft tip, and provide enough support to deliver most interventional devices. All Hi-Torque Guide Wires are intended to facilitate the placement of balloon dilatation catheters during percutaneous transluminal coronary angioplasty (PTCA) and percutaneous transluminal angioplasty (PTA). This HI-TORQUE Guide Wire is intended to facilitate the placement of balloon dilatation catheters during Percutaneous Transluminal Coronary Angioplasty (PTCA) and Percutaneous Transluminal Angioplasty (PTA). This guide wire may also be used with compatible stent devices during therapeutic procedures.
RANS CAN SUPPLY BELOW MATERIALS FROM UAE AND SAUDI ARABIA. Aluminium. Tense, trumph, wheel, extrusion6061, ingots, taint tabot Remelted lead ingots, refined lead ingots Zimc ash, zinc dross Copper scrap Steel scrap
Width 3.7MM Colour White Content HDP with GI Metal Wire Packing 500 meters per roll, 6 rolls in a Box. Usage- In surgical and disposable masks
Niobium Wire 99.8% Product Details Place of Origin: China (Mainland) Brand Name: TXM Model Number:Nb1 Application: Industry Shape: Wire Material: niobium Dimensions: Customer's Requirement Chemical Composition:99.95%Min Product name: Niobium manufacturer high quality niobium wire Name: niobium wire Color: Silver Gray Purity:99.8%+ Type: Non Ferrous Metal Material Usage: Steelmaking Additive Certificate: ISO9001:2008 Size: Clients Requiry Appearance: Visible Impurities Standard: ASTM B708 Supply Ability Supply Ability: 10 Ton/Tons per Month Packaging & Delivery: Wooden case or according to your request Loading Port: Tianjin port, China Lead Time : 10days after order confirmed
Mix Iron scrap
We can offer you Granulated Blast Furnace Slag for cement industry. 25000 mt to 200,000 Mt/ monthly WE have requirement for Granulated Blast Furnace Slag with the following spec Specs: CaO: 35.19%; SiO2: 32.94% ; Al2O3: 18.18% ; Chloride 0.06 %; Fe2O3: 1.68%; MgO: 6.25%; Na2O: 0.34%; SO3: 1.12%; TiO2: 0.42% Insoluble Residue: 1.89%; Glass Content: 94 ( Optical Microscopy)
