Frontline Workhorse guide wires are designed to be flexible, have a soft tip, and provide enough support to deliver most interventional devices. All Hi-Torque Guide Wires are intended to facilitate the placement of balloon dilatation catheters during percutaneous transluminal coronary angioplasty (PTCA) and percutaneous transluminal angioplasty (PTA). This HI-TORQUE Guide Wire is intended to facilitate the placement of balloon dilatation catheters during Percutaneous Transluminal Coronary Angioplasty (PTCA) and Percutaneous Transluminal Angioplasty (PTA). This guide wire may also be used with compatible stent devices during therapeutic procedures.
Radifocus Guidewire M Standard type is a Nitinol hydrophilic guidewire covered with polyurethane containing tungsten and a hydrophilic polymer coating (M Coat) for complete, low friction maneuverability. Indicated for use for standard angiography in coronary and peripheral territories, catheterization, embolization, peripheral angioplasty and stenting (with or without an exchange wire), and subintimal angioplasty in small, standard or large proximal or distal vessels.
Product OverviewDesigned to be your first choice coronary guidewire The RUNTHROUGH NS Extra Floppy is designed to be an all-in-one workhorse wire with a soft, atraumatic, low tip weight wire that can be used to access most everyday and complex lesions.
With more than 16 years experience of manufacturing tungsten carbide dies for the metal working industry, For wire and bar drawing plant, uko has gained business partners from various direction with positive feedback. Wire guides can be supplied in the as sintered, ground or ground and polished condition. Non-standard guides are available upon request. Carbide wire guide dies including Tungsten carbide wire guides Tungsten carbide bush Carbide bunching and stranding dies Tungsten carbide straightener dies We make carbide wire guides which are used in spring manufacturing machines. We use good wear resistant grade carbide for these wire guides for wire cold form industry.
Tungsten Carbide Wear Parts Carbide Wire Guide Dies / Tube Guide For Extrusion Carbide wire guide is made of tungsten carbide for its extremely hard and wear-resistant features, with sophisticated equipment for precision grinding and polishing, coupled with advanced production and processing technology, the inner and the outer diameter of the hole and tolerance R at less than 0.01mm, the surface roughness over the trough reached Ra 0.025 and above, it requires high hardness, smooth surface in use to reduce injury and other enameled wire. Selected carbide grades are YG6X, YG6, YG8, YG15 and so on. Its service life is 10 times than steel wheels. Introduction of Carbide Wire Guides: High hardness (86 ~ 93HRA, equivalent to 69 ~ 81HRC); Hot hardness (up to 900 ~ 1000 C, keeping 60HRC); Good wear resistance There are V-groove, R-groove, U-groove trough over other. V-groove with 90, 110 , 120 , and other specifications, R-groov ranging from R0.2 to R25. Diameter 500mm available.
Tungsten Carbide Wear Parts Carbide Wire Guide Dies / Tube Guide For Extrusion Carbide wire guide is made of tungsten carbide for its extremely hard and wear-resistant features, with sophisticated equipment for precision grinding and polishing, coupled with advanced production and processing technology, the inner and the outer diameter of the hole and tolerance R at less than 0.01mm, the surface roughness over the trough reached Ra 0.025 and above, it requires high hardness, smooth surface in use to reduce injury and other enameled wire. Selected carbide grades are YG6X, YG6, YG8, YG15 and so on. Its service life is 10 times than steel wheels. Introduction of Carbide Wire Guides: High hardness (86 ~ 93HRA, equivalent to 69 ~ 81HRC); Hot hardness (up to 900 ~ 1000 �°C, keeping 60HRC); Good wear resistance There are V-groove, R-groove, U-groove trough over other. V-groove with 90, 110 , 120 , and other specifications, R-groov ranging from R0.2 to R25. Diameter 500mm available.
Supplier: Wire EDM filter, molybdenum wire, brass tube, brass wire, electrode, water nozzle, power feed contact, filter element, sinker EDM filter, guide, cable
Tungsten carbide wire drawing dies, wire coating dies, pcd dies for drawing use for drawing various ferrous and nonferrous wires Tungsten carbide dies Tungsten carbide drawing dies Tungsten carbide nibs Tungsten carbide wire guide dies Pcd dies Both carbide dies nibs and finished products with steel case are supplied
Wire straightening machine & wire cutting machine has a wire straightening system that may be a single/ double plane straightener or another multi-plane straightener. It may also include a wire guide, a wire feeder, and other processing components that are needed to achieve a desired material straightness. With over 10 years experience in developing the innovative straightening & cutting machine and the drill pointing machine, forng wey machinery co., ltd has developed a comprehensive range of machinery models to meet various requirements of customers. Wire straightedge rolling machine: these machines as suitable for straight cutting processed products of non-metals & iron wires, such as welding rod, kitchen utensils, fan frames of umbrella, metal cages, cd racks, hangers luggage frames and other wire products.
1/ general introduction of tungsten carbide wire roller: With more than 16 years experience of manufacturing tungsten carbide rollers for the metal working industry, For wire and bar drawing plant, uko has gained business partners from various direction with positive feedback. Tungsten carbide wire roller including Descaling roller Stress reliving roller Straightening roller Guide roller 2/reference size and application of tungsten carbide wire rodller: Descaling rolls are made of tungsten carbide or steel and are used for the mechanical descaling of entry rod in reduction mills. Stress relieving rolls are made of tungsten carbide to improve the mechanical characteristics of the cold rolled wire. The roll-straightening process is a cold-forming process that uses rollers to provide uniform bending Of wire and/or rod material to change its shape and possible other characteristics for use in subsequent processing.
