Waste vacuum pump, also named as solids transfer pump. It is a pneumatic slurry transfer vacuum pump for liquid, slurry, and solids transfer. With special structure design, it can be used at tough environmental for solids transfer, high working performance and less maintenance. The pump can transfer material with high gravity and high density, solids content max. up to 80%. Material transfer applications: Waste mud and waste solids discharged from shale shaker, mud cleaner and centrifuge transfer Drilling mud transfer Waste pit cleaning Hazardous waste recovery Oil sludge, tank bottoms residual removal and transfer Barge holdings and vessel bottom clean out Bulk tank and silo transfer of material Sand; Course, fine, conventional and frac sand Diatomaceous earth Animal waste etc.
Summary: The SB family of pumps is designed and engineered to handle abrasive, viscous and corrosive fluids in drilling fluid or industrial slurry applications. The pump performance is matched by exceptional performance, high volume, high temperature capabilities, long service life, ease to maintenance, overall economy and greater savings. SB centrifugal pumps are currently in operation on land-based and offshore drilling rigs around the world. We will offer the best choice for the intended application, taking into consideration fluid conditions. Applications: Drilling applications: Mud mixing and shearing operations, desanding and desilting, degassing, supercharging, centrifugal feed, mud cooling towers, wash down. Others Chemical, refinery, industrial, construction and agricultural applications. Working conditions: (Outlet):DN=2â?³~6â?³ (Flow):Q=20~400m3/h (Head):H=12~62m (Working temperature):T=-40°C~60°C Please contact with us to meet you various demands. Explanation of model: SB 6 Ã? 5 11 Impeller Dia(inches) Pump outlet Dia(inches) Pump inlet Dia(inches) Sand pump
Xian Cummins Xcec ISM/Qsm/M11 Water Pump 2882144/4972853/4965430 We Specialized in supplying Cummins,Komatsu,Hyundai,Yanmar diesel engine and Engine Spare Parts. Products Including: Cylinder liner, Block,Head,Crankshaft,Camshaft Piston kit,Gasket kit Connecting Rod Fuel pump, Injector,Water Pump,Oil Pump Air compressor, Alternator, Start motor,Turbocharger, ECM
QZB SERIES COMBINED TYPE WASHER WITH PUMP APPLICATION: THIS EQUIPMENT IS MAINLY USED IN SOLID PREPARATION PROCESS FOR VESSEL AUTOMATIC WASHING AND DRYING. IT CAN SATISFY DIFFERENT SPECIFICATION PHARMA BINS OR IBC WASHING REQUIREMENTS. CONSIDERED AS IDEAL EQUIPMENT FOR VESSEL AUTOMATIC WASHING, IT IS WIDELY USED IN PHARMACEUTICAL EQUIPMENT, CHEMICAL AND FOODSTUFF INDUSTRIES. 1. SEPARATE WASHING FOR EXTERNAL AND INTERNAL OF BINS 2. SEMI AUTOMATION 3. SUIT FOR BIN, DRUM, AND SPARES WASHING. ADVANTAGES OF OUR COMBINED TYPE WASHER WITH PUMP 1. MORE COMPACT AND SPACE SAVING 2. ECONOMIC AND PRACTICAL 3.EASY INSTALLATION
1. Module is made from 4135 alloy steel with strict forging and heat treatment process. 2. Mud pump fluid end parts offer full lines of Cylinder Head, Valve Lock Cover, Cylinder Head Threaded Ring, Cylinder head Plug, Valve Cover Plug, Upper Valve Guide, Lower Valve Guide, Liner Threaded Ring, Liner Lock, Wear Plate and much more. 3. Three types of Liner:High chrome sleeve/single shell/zirconia ceremic liner. 4.Pony rod and piston rod is made of premium quality,heat treated alloy steel. 5.Valve and seat assembly are made of forged alloy steel with deep carburized wear surface. We offer a full range of valves and seats which include full open valve and seat, 3 web / 4 web design valve and seat . Our main products : 1.Fluid End Pump Parts:Liners,Piston Rod and Pony Rod,Piston and Hubs,Fluid End Modules and Accessories, Valve and Seat for all major brand mud pumps. 2.Mud Pump: EMSCO,3NB 3.OCTG Production Equipment: Hydro-Tester, Lengthening Weighing & Marking Equipments Coupling Application Machine etc. 4.We also offer custom design-built service per our clientâ??s drawings and specifications. -
We can supply many spare parts of slurry pump. OEM pump part is welcome. Material options: -High Chrome alloy -Grey Iron -Cast Iron -Rubber -Polyurethane -OEM Pump Parts: Metal impeller is made of high chrome alloy, SA05,SA49, anti-abrasive, SA33 anti-corrosive Rubber impeller is made of SR26,SR55, SR33 Polyurethane material is available. Brief introduction: -Spare parts in anti-abrasion high chrome cast iron alloy. -Largest weight of single workpiece can be 13t. -Largest outside diameter of workpiece can be 5m -Manufacture other mechanical parts according to your drawing. -
We can supply many spare parts of slurry pump. OEM pump part is welcome. Material options: -High Chrome alloy -Grey Iron -Cast Iron -Rubber -Polyurethane -OEM Pump Parts: Metal impeller is made of high chrome alloy, SA05,SA49, anti-abrasive, SA33 anti-corrosive Rubber impeller is made of SR26,SR55, SR33 Polyurethane material is available. Brief introduction: -Spare parts in anti-abrasion high chrome cast iron alloy. -Largest weight of single workpiece can be 13t. -Largest outside diameter of workpiece can be 5m -Manufacture other mechanical parts according to your drawing.
Tobee 100mm vertical submerged chemical pump is mainly used in a variety of sump conditions, It can also be readily applied on floating dewatering or other floating pump platforms. As a true cantilevered vertical slurry pump, TP100RV vertical spindle pump does not have submerged bearings or seals, thus, eliminating the primary failure mechanism for similarly fielded pump lines. Tobee 100mm vertical submerged chemical pump Specification: Size: 100mm Capacity: 40-289m3/h Head: 5-36m Speed: 500-1200rpm Eff.: 62% Power: Max.75kw Handling solids: 32mm Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
Tobee 300mm vertical submerged chemical pump is unique cantilevered design, The sump pumps doesnâ??t need any seal and seal water. The TP300TV pumps are preferred by many customers with special installation requirements and widely applied in sump. Its wear-resistant metal liner could handle abrasive slurries with rough particles and high concentration. Tobee 300mm vertical submerged chemical pump Specification: Size: 300mm Capacity: 288-1267m3/h Head: 6-33m Speed: 350-700rpm Eff.: 50% Power: Max.200kw Handling solids: 65mm Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
Tobee 40mm vertical submerged chemical pump works underwater for delivering heavy concentration abrasive & corrosive slurry with big particles. pump column is made by steel or elastomer covered steel, For rubber lined pump, all wetted parts are made by elastomer for delivering strong corrosion slurry. Tobee 40mm vertical submerged chemical pump specification: Size: 40mm Capacity: 7.2-29m3/h Head: 4-28.5m Speed: 1000-2200rpm Eff.: 40% Power: Max.15kw Handling solids: 12mm Materials: High chrome alloy, Rubber, Polyurethane,Ceramic etc
Tobee 65mm vertical submerged chemical pump is mainly used to transfer high- hardness, strong-corrosion and high-concentration liquids that contain suspended solid particles, The metal lined and elastomer rubber lined is interchageable for different duties, such as finished ores, refuse ores, ashes, cinders, cements, mud, mineral stones and etc. Tobee 65mm vertical submerged chemical pump Specification: Size: 65mm Capacity: 18-113m3/h Head: 5-31.5m Speed: 700-1500rpm Eff.: 60% Power: Max.30kw Handling solids: 15mm Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
Tobee 150mm vertical submerged chemical pump are designed for every other tank, pit or hole-in-the-ground slurry handling situation, TP150SV pumps are available in various standard lengths to suit common sump depths, for very deep sumps or where high shaft speeds limit the length of the pump, a suction extension pipe can be fitted to the bottom inlet to extend the depth of the pump by up to 2 metres. Tobee 150mm vertical submerged chemical pump specification: Size: 150mm Capacity: 108-576m3/h Head: 8.5-40m Speed: 500-1000rpm Eff.: 52% Power: Max.110kw Handling solids: 45mm Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
Tobee 250mm vertical submerged chemical pump is centrifugal sump slurry pumps submerged in sump to work.It is designed for delivering abrasive, large particle and high density slurries. The pumps have no need of any shaft seal and sealing water. it can also be operated normally for insufficient suction duties. The submerged depth can be customed as different sump. Tobee 250mm vertical submerged chemical pump specification: Size: 250mm Capacity: 261-1089m3/h Head: 7-33.5m Speed: 400-750rpm Eff.: 60% Power: Max.200kw Handling solids: 65mm Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
Tobee 200mm vertical submerged chemical pump are an ultra-heavy duty design for continuous operation, the bearing assembly design allows the pumps to operate in very tough conditions without damaging the bearing. Both high chrome alloy and elastomer wet end parts are suitable to the different applications, and the pumps use in many industries, various lengths and suction extensions are available to suit most sump depths. Tobee 200mm vertical submerged chemical pump Design Features: Less wear, less corrosion Wetted components are available in a wide range of alloys and elastomers. Tobee selects the optimum combination of materials for maximum resistance to wear in virtually any industrial application, including those demanding both abrasion and corrosion resistance, and where larger particles or high density slurries are encountered. Abrasion resistant Ultrachrome T05 alloy. Abrasion/corrosion-resistant Hyperchrome T49 alloy. Corrosion-resistant stainless steels. Natural and synthetic elastomers. No submerged bearing failures The robust cantilever shaft avoids the need for lower submerged bearings which are often the source of premature bearing failure. Heavy duty roller bearings, above mounting plate. No submerged bearings. Labyrinth/flinger bearing protection. Rigid, large diameter shaft. No shaft sealing problems The vertical cantilever design requires no shaft seal. No priming required. The top and bottom inlet design is ideally suited for â??snoreâ?� conditions. Less risk of blocking The screened inlets and large impeller passages reduce the risk of blockages. Zero ancillary water costs The vertical cantilever design with no gland or submerged bearings avoids the need for expensive gland or bearing flushing water. Tobee 200mm vertical submerged chemical pump On-site Applications: Mining Sump drainage Coal prep Mineral processing Mill sumps Tunnel Tailings Chemical slurries Ash handing Paper and Pulp Waste sludge Coarse sand Lime mud Phosphoric acid Sump Dredging Mill grinding Alumina Industry Power Plant Potash Fertilizer Plant Other industries
Tobee 6x4 inch gravel pump diesel are a kind of sepecial pump including Feed pump, Discharge pump and Booster pump for MTBM, TBM, EPB, Slurry Shields, and Segment Shields in Tunnelling project, It is designed for continously handling the most difficult higher abrasive slurries which contain too big solids. TG6x4D tunnel Pumps are widely used for delivering gravels, slurries, sands, bentonite, sandy soil, rock, stone, sludge, mud etc Tobee 6x4 inch gravel pump diesel SPECIFICATIONS: Size: 6" x 4" Capacity: 36-250m3/h Head: 5-52m Speed:600-1400rpm NPSHr: 2-5.5m Handling solids: Max.83mm Concentration: 58% Seal arrangement: Packing seal, Expeller seal, mechanical seal Materials: High chrome alloy, Cast iron, Cast steel, Stainless steel etc
Tobee 8x6 inch gravel pump diesel is a kind of cantilevered single-casing centrifugal pump. Pump body is installed with junction plate and cover plate by clamp, which makes the disassembly convenient and quick. The can be equipped with diesel engines or electric motors driven directly, 8x6 Sand Gravel Pump has the advantages of working stability, little vibration, low hydraulic loss, high efficiency, light weight, simple structure and easy maintenance, It is mainly used for dredging river, pipe-jacking system, sucking gravels, blast slag transporting, ore mining etc
Tobee 10x8 inch gravel pump diesel has rational structure, high efficiency, reliable operation, convenient maintenance and other advantages, It is widely used for conveying abrasive or corrosive slurry, especially for dredging, mining, metallurgy, coal, electric power, building materials, chemical industry and other industrial sectors.
Tobee 12x10 inch gravel pump diesel is a single stage, single casing, centrifugal horizontal pump driven by electric motor diesel engine. Large flow passage allows large particle solids, with advantages of high efficiency, wear resistant, wide flow channel, good ability of NPSH, stable performance, easy assembly, The discharge outlet can be adjusted at any direction, It is worlds standard for dredge, gravel or large particle slurries applications.
Tobee 16x14 inch gravel pump diesel is horizontal single-casing high head sand pump with wide passage to transfer sand or slurry with big particle size. The wet parts are made of Ni-hard and high-Chrome alloys to ensure long service life. It is widely used for high head and long distance delivering in dredging, sand mining, barge loading and mineral processing etc.
Tobee 18x16 inch gravel pump diesel is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life, It is mainly suitable for delivering slurry, sand, gravel, sludge, mud, blast slag and other abrasive medium. Especially suitable for the high flow, high concentration and high head working conditions.
