Centrifugal Pump VOLUTE ECD Series can be used for the following services in commercial, residential, agriculture industrial processing petroleum, food & beverage industries.
Kira series np submersible pump, pump made of high quality cast iron with epoxy coating, has good corrosion resistance, impeller is non-clog, IP68 protection, has automatic shut-off High quality products From Japan
Mud Pump For Drilling Rig Oil Drilling Mud Pump DESCRIPTION of Centrifugal Mud Pump Centrifugal Pumps are used to supply slurry to desanders and desilters, and at the same time can be kinetic pumps for jet mud mixers. Adopt high wear resistant hard alloy mechanical seal . Adopt imported bearings . Adopt thicker pump cases , whose flow passages are more reasonable , which can reduce turbulence to the minimum. Pump body adopts open structure , which makes the installation, repair and maintenance to be more convenient. Impellers and over-current components all adopt high wear resistant cast iron.
The centrifugal pump is horizontal or vertical, self-priming or Non-self-priming, installed in engine room of the ships, used as ballast pump, general service pump, bilge pump, fresh water transfer pump, sea water transfer pump, F.W./S.W.cooling pump, fire pump, sewage pump and sanitary water pump. Main Data: Capacity: up to 1500m3/h Head: up to 130m
The gastight bulkhead penetration (gland) is a kind of transmission interlcoked with the bulkhead between pump room and engine room for connecting the driver and the cargo pump.
The twin screw pump is self-priming, double-ended positive displacement pump with external timing gears and bearings. It can handle virtually any non-homogeneous fluid, regardless of viscosity, lubricity or abrasiveness e.g. oil, bitumen, molasses, lime, acid, caustic solution or hydrocarbon. The pump is widely used as cargo pump and stripping pump for oil, chemical and bitumen/asphalt tankers. Main Data: Capacity: up to 2500m3/h Pressure: up to 25bar(2.5MPa) Max. Temparature: up to 300 Degrees Celsius Viscosity: up to 100,000cSt Heating Jacket: optional
Equipment Summary and features Can Use for 5 Gallon(20kg) Barrel packaging Iron and plastic barrels Suitable for 10,000-1,000,000cps high viscosity liquid Equipped with high pressure special valve to realize high viscosity liquid precision dispensing and greatly improve production and glue quality Use the liquid within one month after the packing is opened Motor power:400W Rotor diplacement: 1.5/3/6cc Maximum delivery pressure: 80 kg Repeated precision: +- 2% Maximum glue dispensing volume: 5ml/sec Rated voltage: AC 220V Minimum glue dispensing amount: 0.005ml/sec Rated frequency: 50HZ Rated power: 500W Rated pressure:0.6MPA PMP-20 screw pumps are suitable for low, medium high viscosity or abrasive liquids such as silica gel, epoxy, grease, heat conducting gel, UV, etc. The 5 gallon / 20L barrel is used, and the pressure plate sealing method is adopted to facilitate the use and replacement of glue. The stator and rotor are driven by the servo motor to ensure the realization of precision measurement, and solve the problems of glue breaking, unstable glue amount and uneven lines caused by the unstable pulse and air pressure of the traditional pneumatic piston pump. The servo screw mode can be used in all dispensing processes such as bonding, fixing, potting, bottom filling, plane sealing or double liquid dispensing Solve the problems of unstable pressure in pneumatic glue supply and transportation mode and unstable pressure caused by the change of rubber barrel affected by resistance, which affects the repeated accuracy of dispensing Solve the pulse instability caused by pneumatic or cylinder and piston rubber supply and transportation The equipment is equipped with a special servo drive controller with its own touch screen. Adjust the glue amount through the working speed function item. The larger the value is, the larger the glue amount is (the minimum is 0.005ml, the maximum is 5ml / sec, and the size can be customized)
Product Details Product Name: LEXUS Power steering pump 44310-33140 44320-33140 Car application: LEXUS Power steering pump OEM NO: as above Minimal quantity: 100 pieces Delivery time: 45 days Payment terms: T/T Western union Warranty: one year
Product Details Product Name Toyota CAMRY 7PK Power steering pump 44310-0K050 44310-35660 44310-0K060 44310-48070 Car application Toyota CAMRY 7PK Power Steering Pump OEM NO as above Minimal quantity 48 pieces Delivery time 45 days Payment terms T/T Western union Warranty one year
Electric Operated Double Diaphragm Pump (EODD PUMP) Available size :- 1/2" to 2" Power :- 1 hp to 5 hp Available m.o.c :- POLYPROPYLENE, Aluminum ,S.S, PVDF Capacity :- 20 LPM to 450 LPM
Air Operated Double Diaphragm Pump. Available size :- 1/2" to 2" Available M.O.C :- Polypropylen, Aluminum ,S.S, PVDF Pressure :- 8 kg/cm2 Capacity :- 35 LPM to 550 LPM
Gray, hardness at 30 degrees, waterproof, moisture-proof, insulating, shock-proof
Pump for lead kettle Application range: flow rate 5~100t/h Structure description: Composed by the impeller, pump casing, pump shaft, bearing assembly, coupling assembly, frame, and motor etc. Characteristics: 1.Wide flow range and precise control 15~80 t/h �±10%; 2.High head: 1.5m~16m, and can be equipped with the long-distance conveying system to make the conveying distance to reach 40 meters; 3.Wide temperature range: 180â??~550â??; 4.Long service life, 3~6 months for impeller, 6~12 months for pump shaft and pump casing; 5.High surface finish to ensure that it is not easy to form slag; 6.Stable operation without noise and vibration. Advantage: Normally the impurity content in the lead liquid will increase along with the continuously increasing melting temperature, so the pump is easy to be blocked. To meet the special requirements of the new process, our lead pump uses high-temperature-resistant material, reasonable flow channel design, and precision machining of parts. It can be used at a temperature of 800�°-900�°. Scope of application: It is used for high-temperature transportation of lead liquid, such as lead liquid transportation in multi-metal comprehensive recovery projects, alloy lead liquid transportation in the process of lead alloy smelting. Features: The pump shaft, pump casing, impeller, support frame, and other important parts are made of high temperature resistant stainless steel, which can operate stably for a long time in a high-temperature environment. Equipped with a special working platform with heat insulation, it can effectively reduce the heat radiation to the bearings and motors above the lead pump and extend its service life. Performance: The temperature of the liquid lead can reach 900, and the flow rate is 20~100t/h or more. We can provide customized service for you, you are warmly welcome to visit us!
Overview QZ series submersible axial flow pump is a new generation of submersible axial flow pump products independently developed by our company,it is not only simple in structure,easy to disassemble and assemble,but also has excellent performance as an alternative to traditional axial flow pump. This QZ series of products has a wide spectrum,good hydraulic performance and novel structure.it is characterized by high efficiency,good cavitation performance,easy installation and maintenance,at the same time,combined with the latest information control technology,the intelligent water pump system independently developed can be configured,with automatic monitoring function. The design,manufacture,and quality of this series product meet the standard of GB/T13008 Technical conditions for mixed-flow pump and axial-flow pump JB/T Large and medium-sized submersible motor-pumps Application This series of products can be used for clear water or other liquids with physical and chemical properties close to water whose temperature of conveying medium is no more than 43â??. They are widely used in municipal engineering, large-scale water conservancy projects, farmland irrigation,industrial conveying water.The thermal power station car-ries circulating water.Shipyard level,urban water supply and drainage and water diversion projects Working condition The medium:clear water,rain water,river water,sewage waste water,any of various liquids whose physicochemical properties resemble those of water Rated voltage:380V or 660V 3KV 6KV 10KV,etc Medium temperature: 43 Starting mode : soft start or frequency conversion Direction of rotation:from the drive end,the pump is rotated in clockwise Product features High-efficiency energy saving: the hydraulic model is designed by 3-D flow theory and calculated by CFD computational simulation,with the best performance in theory. Hydraulic components are made of metal mold,cast precisely guide blade mould is machined by CNC;guide blade shell and suction cone blank are cast by resin sand,solid flow channel is completely in accordance with design drawings,with efficiency higher, and wide high efficiency zone High reliability:the design of the inlet flow channel is reasonable, the inlet water is uniform without vortex, with smooth running, the absolute concentricity o the pump shaft, and the excellent static balance of the rotor parts ensure that the pump has low vibration and low noise when running at high speed Advanced technology:all parts using metal mold,precision casting,parts quality is reliable Low maintenance: reasonable structure,convenient assembly and disassembly, and simple maintenance Inventory management: reasonable inventory management,short lead time,fast delivery Automatic monitoring: Equipped with intelligent water pump system independently developed,with automatic monitoring function
Overview QZ series submersible axial flow pump is a new generation of submersible axial flow pump products independently developed by our company,it is not only simple in structure,easy to disassemble and assemble,but also has excellent performance as an alternative to traditional axial flow pump. This QZ series of products has a wide spectrum,good hydraulic performance and novel structure.it is characterized by high efficiency,good cavitation performance,easy installation and maintenance,at the same time,combined with the latest information control technology,the intelligent water pump system independently developed can be configured,with automatic monitoring function. The design,manufacture,and quality of this series product meet the standard of GB/T13008 Technical conditions for mixed-flow pump and axial-flow pump JB/T Large and medium-sized submersible motor-pumps Application This series of products can be used for clear water or other liquids with physical and chemical properties close to water whose temperature of conveying medium is no more than 43. They are widely used in municipal engineering, large-scale water conservancy projects, farmland irrigation,industrial conveying water.The thermal power station car-ries circulating water.Shipyard level,urban water supply and drainage and water diversion projects Working condition The medium:clear water,rain water,river water,sewage waste water,any of various liquids whose physicochemical properties resemble those of water Rated voltage:380V or 660V 3KV 6KV 10KV,etc Medium temperature: 43 Starting mode : soft start or frequency conversion Direction of rotation:from the drive end,the pump is rotated in clockwise Product features High-efficiency energy saving: the hydraulic model is designed by 3-D flow theory and calculated by CFD computational simulation,with the best performance in theory. Hydraulic components are made of metal mold,cast precisely guide blade mould is machined by CNC;guide blade shell and suction cone blank are cast by resin sand,solid flow channel is completely in accordance with design drawings,with efficiency higher, and wide high efficiency zone High reliability:the design of the inlet flow channel is reasonable, the inlet water is uniform without vortex, with smooth running, the absolute concentricity o the pump shaft, and the excellent static balance of the rotor parts ensure that the pump has low vibration and low noise when running at high speed Advanced technology:all parts using metal mold,precision casting,parts quality is reliable Low maintenance: reasonable structure,convenient assembly and disassembly, and simple maintenance Inventory management: reasonable inventory management,short lead time,fast delivery Automatic monitoring: Equipped with intelligent water pump system independently developed,with automatic monitoring function
Overview Carry clean water or the liquids which is similar to clean water, supply water for industry and city,pressure booster for water supply for high building,fire protection,long distance transportation,carry circulation cooling for air condition carry the liquids which is similar to water in manufacturing process are,also use with the fire fighting or life pressure booster system. Pump with the same specification can change the performance parameters by cutting the outer diameter of the impeller;the normal speed of the pump is 1450RPM and 2900RPM, if it is required to operate at the maximum speed of 3550RPM(60Hz power supply),our company can provide technical instruction on the change of the outer diameter of the impeller The type NLG pump features simple structure,reliable performance,small volume,light weight,high efficiency,good ati-cavitation performance, low power consumption and convenient use and maintenance The pump is suitable for pumping medium at temperature of -10~85 and working pressure of 1.0MPa,if there is a need to increase to 1.6MPa or higher,please specify when selecting and ordering Performance  Capacity: 8-1400m3/h Head: 5-135 m Inlet outlet diameter: 50-350mm Product advantages High-efficiency energy saving: all pumps are used domestic advanced computer hydraulic model software and optimized design, performance advantage is obvious,the efficiency is 2-3% higher than similar products to save more energy,and wide high efficiency area Equipment reliability:Absolute concentricity of pump shaft and excellent static and dynamic equilibrium of impeller,ensure the pump running at high speed with low vibration,low noise Convenient installation, maintenance:Pump shaft and motor shaft are rigidly connected, easy separating and maintaining between motor and pump, the pump can be installed in any position and direction of the pipeline,simply open the pump cover for repair Low maintenance: reasonable structure,convenient assembly and disassembly, and simple maintenance Special design : As required, the flow channel can be used the US high temperature enamel technology to improve efficiency and durability
Overview Carry clean water or the liquids which is similar to clean water, supply water for industry and city,pressure booster for water supply for high building,fire protection,long distance transportation,carry circulation cooling for air condition carry the liquids which is similar to water in manufacturing process are,also use with the fire fighting or life pressure booster system. Pump with the same specification can change the performance parameters by cutting the outer diameter of the impeller;the normal speed of the pump is 1450RPM and 2900RPM, if it is required to operate at the maximum speed of 3550RPM(60Hz power supply),our company can provide technical instruction on the change of the outer diameter of the impeller The type NLG pump features simple structure,reliable performance,small volume,light weight,high efficiency,good ati-cavitation performance, low power consumption and convenient use and maintenance The pump is suitable for pumping medium at temperature of -10~85 and working pressure of 1.0MPa,if there is a need to increase to 1.6MPa or higher,please specify when selecting and ordering Performance Capacity: 8-1400m3/h Head: 5-135 m Inlet outlet diameter: 50-350mm Product advantages High-efficiency energy saving: all pumps are used domestic advanced computer hydraulic model software and optimized design, performance advantage is obvious,the efficiency is 2-3% higher than similar products to save more energy,and wide high efficiency area Equipment reliability:Absolute concentricity of pump shaft and excellent static and dynamic equilibrium of impeller,ensure the pump running at high speed with low vibration,low noise Convenient installation, maintenance:Pump shaft and motor shaft are rigidly connected, easy separating and maintaining between motor and pump, the pump can be installed in any position and direction of the pipeline,simply open the pump cover for repair Low maintenance: reasonable structure,convenient assembly and disassembly, and simple maintenance Special design : As required, the flow channel can be used the US high temperature enamel technology to improve efficiency and durability
Overview Carry clean water or the liquids which is similar to clean water, supply water for industry and city,pressure booster for water supply for high building,fire protection,long distance transportation,carry circulation cooling for air condition carry the liquids which is similar to water in manufacturing process are,also use with the fire fighting or life pressure booster system. Pump with the same specification can change the performance parameters by cutting the outer diameter of the impeller;the normal speed of the pump is 1450RPM and 2900RPM, if it is required to operate at the maximum speed of 3550RPM(60Hz power supply),our company can provide technical instruction on the change of the outer diameter of the impeller The type NLG pump features simple structure,reliable performance,small volume,light weight,high efficiency,good ati-cavitation performance, low power consumption and convenient use and maintenance The pump is suitable for pumping medium at temperature of -10~85 and working pressure of 1.0MPa,if there is a need to increase to 1.6MPa or higher,please specify when selecting and ordering Performance  Capacity: 8-1400m3/h  Head: 5-135 m  Inlet outlet diameter: 50-350mm Product advantages High-efficiency energy saving: all pumps are used domestic advanced computer hydraulic model software and optimized design, performance advantage is obvious,the efficiency is 2-3% higher than similar products to save more energy,and wide high efficiency area Equipment reliability:Absolute concentricity of pump shaft and excellent static and dynamic equilibrium of impeller,ensure the pump running at high speed with low vibration,low noise Convenient installation, maintenance:Pump shaft and motor shaft are rigidly connected, easy separating and maintaining between motor and pump, the pump can be installed in any position and direction of the pipeline,simply open the pump cover for repair Low maintenance: reasonable structure,convenient assembly and disassembly, and simple maintenance Special design : As required, the flow channel can be used the US high temperature enamel technology to improve efficiency and durability
Overview Type NDX pump is applicable for pumping clean water and liquids whose physical and chemical properties are similar to water and without solid particles. This series of products can be used in factories,mines,urban water supply and drainage,HAVC,industrial softened water and farmland irrigation and drainage,etc.It can also be used in pressure stabilization and water supply systems of urban fire control. Pump with the same specification can change the performance parameters by cutting the outer diameter of the impeller;the normal speed of the pump is 1450RPM and 2900RPM, if it is required to operate at the maximum speed of 3550RPM(60Hz power supply or with gasoline and diesel engine),our company can provide technical instruction on the change of the outer diameter of the impeller The type NDX pump features simple structure,reliable performance,small volume,light weight,high efficiency,good ati-cavitation performance, low power consumption and convenient use and maintenance The pump is suitable for pumping medium at temperature of -10~85 and working pressure of 1.0MPa,if there is a need to increase to 1.6MPa or higher,please specify when selecting and ordering Performance  Capacity: 5-1650m3/h  Head: 5-135 m Product Features Energy efficient: Applying the most advanced NRCE design software and CFD fluid simulation software to develop and design the high efficiency hydraulic model,through the analysis of pump flow field,temperature field and strength,thermal deformation,fracture,rotor dynamics,etc,to achieve high efficiency ,reliability and wide efficiency zone,we have made the pump satisfy the efficiency and reliability requirements of centrifugal pump operating under design conditions and non-design conditions, reaching the international advanced level. Rear opening type structure:The maintenance is convenient,It is not necessary to disassemble the suction and discharge pipes during maintenance to pull out the rotor parts for maintenance Quality assurance:Before casting,the imported chemical analysis of the materials was carried out by the direct reading spectrum analyzer introduced from Britain to ensure that the material composition meets the requirement.The pump impeller and rotor components are tested by precise dynamic balance test,so the pump can run more smoothly, have less vibration and noise and longer service life. Product orientation:Improve the technical level of the domestic equipment industry, effectively serve equipment and processes to meet the needs of safety,reliability,energy conservation and environmental Protection.
Overview Type NDX pump is applicable for pumping clean water and liquids whose physical and chemical properties are similar to water and without solid particles. This series of products can be used in factories,mines,urban water supply and drainage,HAVC,industrial softened water and farmland irrigation and drainage,etc.It can also be used in pressure stabilization and water supply systems of urban fire control. Pump with the same specification can change the performance parameters by cutting the outer diameter of the impeller;the normal speed of the pump is 1450RPM and 2900RPM, if it is required to operate at the maximum speed of 3550RPM(60Hz power supply or with gasoline and diesel engine),our company can provide technical instruction on the change of the outer diameter of the impeller The type NDX pump features simple structure,reliable performance,small volume,light weight,high efficiency,good ati-cavitation performance, low power consumption and convenient use and maintenance The pump is suitable for pumping medium at temperature of -10~85â?? and working pressure of 1.0MPa,if there is a need to increase to 1.6MPa or higher,please specify when selecting and ordering Performance  Capacity: 5-1650m3/h  Head: 5-135 m Product Features Energy efficient: Applying the most advanced NRCE design software and CFD fluid simulation software to develop and design the high efficiency hydraulic model,through the analysis of pump flow field,temperature field and strength,thermal deformation,fracture,rotor dynamics,etc,to achieve high efficiency ,reliability and wide efficiency zone,we have made the pump satisfy the efficiency and reliability requirements of centrifugal pump operating under design conditions and non-design conditions, reaching the international advanced level. Rear opening type structure:The maintenance is convenient,It is not necessary to disassemble the suction and discharge pipes during maintenance to pull out the rotor parts for maintenance Quality assurance:Before casting,the imported chemical analysis of the materials was carried out by the direct reading spectrum analyzer introduced from Britain to ensure that the material composition meets the requirement.The pump impeller and rotor components are tested by precise dynamic balance test,so the pump can run more smoothly, have less vibration and noise and longer service life. Product orientation:Improve the technical level of the domestic equipment industry, effectively serve equipment and processes to meet the needs of safety,reliability,energy conservation and environmental Protection.
