Pump for lead kettle
Application range: flow rate 5~100t/h
Structure description: Composed by the impeller, pump casing, pump shaft, bearing assembly, coupling assembly, frame, and motor etc.
Characteristics:
1.Wide flow range and precise control 15~80 t/h �±10%;
2.High head: 1.5m~16m, and can be equipped with the long-distance conveying system to make the conveying distance to reach 40 meters;
3.Wide temperature range: 180â??~550â??;
4.Long service life, 3~6 months for impeller, 6~12 months for pump shaft and pump casing;
5.High surface finish to ensure that it is not easy to form slag;
6.Stable operation without noise and vibration.
Advantage: Normally the impurity content in the lead liquid will increase along with the continuously increasing melting temperature, so the pump is easy to be blocked. To meet the special requirements of the new process, our lead pump uses high-temperature-resistant material, reasonable flow channel design, and precision machining of parts. It can be used at a temperature of 800�°-900�°.
Scope of application: It is used for high-temperature transportation of lead liquid, such as lead liquid transportation in multi-metal comprehensive recovery projects, alloy lead liquid transportation in the process of lead alloy smelting.
Features: The pump shaft, pump casing, impeller, support frame, and other important parts are made of high temperature resistant stainless steel, which can operate stably for a long time in a high-temperature environment.
Equipped with a special working platform with heat insulation, it can effectively reduce the heat radiation to the bearings and motors above the lead pump and extend its service life.
Performance: The temperature of the liquid lead can reach 900, and the flow rate is 20~100t/h or more.
We can provide customized service for you, you are warmly welcome to visit us!
Lead liquid pump Lead water pump is a pump used in lead processing enterprises to extract high-temperature liquid lead. It belongs to a type of centrifugal pump. The impeller is an open impelle
Lead liquid pump Lead water pump is a pump used in lead processing enterprises to extract high-temperature liquid lead. It belongs to a type of centrifugal pump. The impeller is an open impeller
Application: This product is suitable voltage level is less than 3kv/6kv of electric submersible pump until and the power cable connected to the supporting power supply. Operating characteristics: Cables rated voltage:1.8/3kv---3.6/6kv Cable minimum ambient temperature of not less than-50celsius degree. Cable normal operating temperature between 90--250celsius degree Cable minimum bending radius of not less than 30 times the thickness of cable. The structure of cable includes conductor, insulation, Kapton, lead sheath layer and armor. The production range of cable :the cross-sectional area is 10--20mm2 and the core number is 3. Type and designation:
About Lead Refining Lead recycled from used lead acid batteries or other sources (Secondary Smelting) via the Mini Blast Furnace or Rotary Furnace route, contains lot of contamination and undesired components. On the other hand, Lead required for battery manufacturing is either soft Lead with 99.97% purity or hard Lead of varying Antimony compositions. In order to make quality of lead suitable for its different uses, different variations of pot melting processes are employed. These include – “Re-Melting” for removal of slag, “Refining” for attaining required purity levels and “Alloying” for producing various alloys of lead. The equipments used are the same, the consumables and the processes, however, differ. Description of Melting Pot The Melting Pot (or Refining Pot or Alloying Pot, as it is variously called), is a mechanical mixing device with a pot and a heating arrangement. The inner pot is made of heavy MS plate with dish end bottom. It is placed within a jacket of refractory bricks, which in turn, are protected by an outer cover of MS plate with reinforcements. The pot is covered at the top with opening for feeding lead ingots and is provided with an electro-mechanical mixer. At the bottom, a heating source, usually an oil fired burner, is provided to heat the pot and to melt the lead. Once lead melts, impurities are skimmed and removed and any consumables required are added. Lead is then drained from the pot through an outlet pipe and valve. Capacity of such pots depends upon the requirements of particular units. Standard pot capacities made are from 4.0 TpB to 20.0 TpB. Higher capacity pots are also manufactured as required by any particular establishment. A typical 10.0 TpB Refining Pot has the following standard sizes and specifications: •Diameter (ID) : 1150mm •Height : 1250mm (+Dish Depth of 200mm) •Flange Width : 350mm •Outer Shell Diameter : 1900mm •Stirrer MoC & Dia : SS-304 & 75mm •Stirrer Motor : 5.0 HP x 960 RPM •Outlet Valve Size : 40mm •Burner : Diesel Fired •Fuel Consumption Range : 8-18kg/ltr Melting pots are installed both with and without accessories which may include Ingot Casting Machine, Ball Making Machine (where Ball Mills are installed down the line), Air Pollution Control Systems, Jib Cranes etc.
V6 Slim Submersible Pumpset MOTOR: Motor Shaft : AISI 410 / AISI 420, Thrust Bearing : Carbon Plate With S.S. Segment (With Tilted Pads), Stamping : Electric Sheet, Casting Parts : Graded Casting, Copper : E.C. Grade Copper (99.9% Purity), Bush : Leaded Tin Bronze (LTB-4), Fastners : Stainless Steel, Rubber Parts : NBR PUMP: Pump Shaft : AISI 410, Impeller : SS 304 , Diffuser : SS 304, Casting Parts: Graded Casting Technical Details: Head Range : Up To 400 Mtrs, Discharge Range : Up TO 560 lpm, Delivery : 50 mm, Power Rating : 4 H.P. TO 15 H.P., Voltage Range : 350 V TO 440 V (3-Phase) Salient Features: All Running Pumpsets Are Approved by B.I.S. & BEE, An ISO 9001-2015 Certified Company, Highly Efficient Motor & Pump, Specially Design For Wide Voltage Range, Easy To Install, Low Power Consumption, Corrosion Resistance Stainless Steel Motor & Pump Body, Rotors Are Dynamically Balanced 2850+ RPM TO Reduce Vibration, Long Life And Negligible Maintenance Due To High Precision Work, Rotor Are Painted With Special Epoxy Paint For Prevent Corrosion Effect For Long Time, Noiseless & Vibration Free Motors, All Parts Machined On CNC Machine Only, Easy To Rewind & Easily Repairable
V6 S.S. 50 Feet Submersible Pumpset MOTOR: Motor Shaft : AISI 410 / AISI 420, Thrust Bearing : Carbon Plate With S.S. Segment (With Tilted Pads), Stamping : Electric Sheet, Casting Parts : Graded Casting, Copper : E.C. Grade Copper (99.9% Purity), Bush : Leaded Tin Bronze (LTB-4), Fastners : Stainless Steel, Rubber Parts : NBR PUMP: Pump Shaft : AISI 410, Impeller : SS 304 , Diffuser : SS 304, Casting Parts: Graded Casting Technical Details: Head Range : Up To 520 Mtrs, Discharge Range : Up TO 750 lpm, Delivery : 50 mm / 65 mm, Power Rating : 3 H.P. TO 35 H.P., Voltage Range : 350 V TO 440 V (3-Phase) Salient Features: All Running Pumpsets Are Approved by B.I.S. & BEE, An ISO 9001-2015 Certified Company, Highly Efficient Motor & Pump, Specially Design For Wide Voltage Range, Easy To Install, Low Power Consumption, Corrosion Resistance Stainless Steel Motor & Pump Body, Rotors Are Dynamically Balanced 2850+ RPM TO Reduce Vibration, Long Life And Negligible Maintenance Due To High Precision Work, Rotor Are Painted With Special Epoxy Paint For Prevent Corrosion Effect For Long Time, Noiseless & Vibration Free Motors, All Parts Machined On CNC Machine Only, Easy To Rewind & Easily Repairable
V6 Redial Flow 50 Feet Submersible Pumpset MOTOR: Motor Shaft : AISI 410 / AISI 420, Thrust Bearing : Carbon Plate With S.S. Segment (With Tilted Pads), Stamping : Electric Sheet, Casting Parts : Graded Casting, Copper : E.C. Grade Copper (99.9% Purity), Bush : Leaded Tin Bronze (LTB-4), Fastners : Stainless Steel, Rubber Parts : NBR PUMP: Pump Shaft : AISI 410, Impeller : Nylon-6 (With S.S. Neck Ring) , Diffuser : Graded Casting, Casting Parts: Graded Casting Technical Details: Head Range : Up To 520 Mtrs, Discharge Range : Up TO 750 lpm, Delivery : 50 mm / 65 mm, Power Rating : 3 H.P. TO 35 H.P., Voltage Range : 350 V TO 440 V (3-Phase) Salient Features: All Running Pumpsets Are Approved by B.I.S. & BEE An ISO 9001-2015 Certified Company Highly Efficient Motor & Pump Specially Design For Wide Voltage Range Easy To Install Low Power Consumption Corrosion Resistance Stainless Steel Motor & Pump Body Rotors Are Dynamically Balanced 2850+ RPM TO Reduce Vibration Long Life And Negligible Maintenance Due To High Precision Work Rotor Are Painted With Special Epoxy Paint For Prevent Corrosion Effect For Long Time Noiseless & Vibration Free Motors All Parts Machined On CNC Machine Only Easy To Rewind & Easily Repairable
Air pump Air pump for aquarium
Magnetic Pumps are widely used for Electroplating Process (HCL/Zinc Plating & Coating) Available in Polypropylene.
