V SERIES STAINLESS STEEL SEWAGE SUBMERSIBLE PUMP V2200F SPECIFICATION: Liquid temperature up to 35 Max. Ambient temperature: 40 Max. Immersed depth: 5m Liquid PH value: 4-10 Liquid Kinematic viscosity 7*10-7~23*10-6m2/s Max. Liquid density: 1.2*103kg/m2 Insulation Class: B/F Protection Grade:... url:http://www.daqinpump.com
V SERIES STAINLESS STEEL SEWAGE SUBMERSIBLE PUMP V1500F SPECIFICATION: Liquid temperature up to 35 Max. Ambient temperature: 40 Max. Immersed depth: 5m Liquid PH value: 4-10 Liquid Kinematic viscosity 7*10-7~23*10-6m2/s Max. Liquid density: 1.2*103kg/m2 Insulation Class: B/F Protection Grade:...
APPLICATIONS: For boosting pressure for family tap water, fire fighting apparatus, water heaters, industrial equipments. For sending water to tall building. For increasing oxygen for rearing ponds and fish tanks. Applicative for both HOT & COOL water. MATERIALS: Winding:...
4SP Deep Well Submersible Pump
SPECIFICATION: Liquid temperature up to 40 Max. Ambient temperature:40 Max. Suction: 8m Insulation Class: B/F Protection Grade: IPX4 Pump body &Support: Cast iron with brass/AISI304/Steel Insert Motor housing:Aluminium Shaft: AISI304 Winding: Copper Impeller: Brass...
SPECIFICATION: Liquid temperature up to 40 Max. Ambient temperature:40 Max. Suction: 8m Insulation Class: B/F Protection Grade: IPX4 Pump body &Support: Cast iron with brass/AISI304/Steel Insert Motor housing:Aluminium Shaft: AISI304 Winding: Copper Impeller: Brass…
JSP SERIES SELF-PRIMING JET PUMP SPECIFICATION: Liquid temperature up to 40 Max. Ambient temperature:40 Max. Suction: 9m Insulation Class: B/F Protection Grade: IP44 Pump body &Support: Cast iron Motor housing:Aluminium Shaft: AISI304 Winding: Copper Impeller: PPO/Brass/AISI304 Mechanical..
JDP SERIES SELF-PRIMING JET PUMP JDP-370A SPECIFICATION: Liquid temperature up to 40 Max. Ambient temperature:40 Max. Suction: 9m Insulation Class: B/F Protection Grade: IP44 Pump body &Support: Cast iron Motor housing:Aluminium Shaft: AISI304 Winding: Copper Impeller: PPO/Brass/AISI304...
INSTALLATIONS AND USE .It is a 3- speed circulation pump that can be used in both open and closed systems. The pump is of the wet- rotor type, i.e. pump and motor form an integral unit without a shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid....
INSTALLATIONS AND USE .For pumping clean liquids without abrasive particles, which are chemically non aggressive to the pump materials .For water supply .For heating, air -conditioning, cooling and circulation plants .For civil and industrial applications .For firefighting applications .For...
INSTALLATIONS AND USE .For water supply .For clean liquids, without abrasives, which are non-aggressive to the pump materials .For domestic use, for civil and industrial applications, for garden use and irrigation PERFORMANCE RANGE .Flow rate up to 28m /h .Head up to 60m OPERATING CONDITIONS... url:http://www.waterpumpsupplie.com
INSTALLATIONS AND USE SP .For clean water containing solids up to 5mm .For discharging domestic waste water .For draining rooms or emptying tanks .Extraction of water from ponds, streams and for rainwater collection SPD .For dirty water, containing solids up to 35mm PERFORMANCE RANGE .Flow rate...
INSTALLATIONS AND USE .For water supply system .For clean non -explosive liquids, without solids, filamentary or abrasive matter and non -aggressive to the pump materials .A universal pump for civil and industrial use, for pressure boosting systems, fire-fighting systems, high-pressure washing...
FEATURES .An agitator is provided to assist smooth suction of the pumping fluid .The side -flow, top- discharge keeps the motor cooling even the pump runs continuously .High chrome iron Semi -open impeller enables the pump to maintain its original performance OPERATING CONDITIONS .Liquid...
1. Introduction HP-220-5-03 peristaltic pump is specialized for condensed fluid recycle, to make sure that elements can work smoothly, such as cooler and catch tray. Synchronous generators and gear wheel can prevent condensed fluid refluxing. 0.3L/h pipetting of the pump can eliminate the condensed fluid. The pump has superior creep resistance and antifatigue function. 2.Features Preventing condensed fluid refluxing efficiently 0.3l/h pipetting Easy to replace new pump Containing superior Germany peristaltic pump tube 3.Specification Rpm: 5rpm or 10rpm Flux: 0.3NL/h Power supply: 220VAC/50Hz 3.5W Connecting material: PVDF Interface form: PVDF, OD6mm ferrule Pump tube size: D7.5mm/ID4.3mm L=125mm
Features of Infusion Pump 1. HD LCD Display, high capacity words, friendly user interface, dynamically display working status; 2. Audible and visual alarm for occlusion, empty, low battery, end of infusion, door open, wrong setting, etc., which gain patents; 3. Compatible with any brands of infusion sets after correct calibration; 4. Preset solution volume to greatly reduce the workload of nurses; 5. Work mode: ml/h and drop/min can switch freely; 6. Three levels of occlusion: high, middle and low; 7. Purge function; 8. KVO (keep-vein-open) automatically opens as infusion is completed, KVO rate is 1-5ml/h(1ml/h step); 9. Power Source: AC100---240V, 50/60Hz; Internal Battery; 10. Automatically record the settings of last infusion; 11. BYS-820D can store 2000pcs of infusion records and it has a drug library. 12.OEM is available. Specification of Infusion Pump Rate 1ml/h ~ 1,200ml/h Flow Rate Accuracy Within ±5% (after correct calibration) Mechanical precision Within ±2% Purge Rate 100ml/h ~ 1,000ml/h (100 ml/h step) Infusion Volume 1ml ~ 9999ml Total Infusion Volume 0.1ml ~ 9999.9ml KVO rate 1ml/h ~ 5 ml/h (1ml/h step) Occlusion High: 800mmHg ±200mmHg (106.7kPa±26.7kPa Medium: 500mmHg ±100mmHg(66.7kPa±13.3kPa Low: 300mmHg ±100mmHg (40.7kPa±13.3kPa ) Unique audible and visible alarm Human voice alarm for End of injection, occlusion, door open, bubbles in the tube, wrong setting, low battery, AC power pulled out etc. Power Source AC 100V ~ 240V, 50/60Hz; Internal rechargeable Li battery, capacity�?�1,600mAh, 4 hours internal battery backup Bubble detector Ultrasonic wave detector; detection sensitivity �?�25μL Fuse F1AL/250V, 2 pc inside Power Consumption 18VA Operating Condition Ambient temperature: +5�?? ~ +40�??; Relative humidity: 20 ~ 90% Atmospheric pressure: 86.0kpa ~ 106.0kpa Transport & Storage Condition Ambient temperature:-30�?? ~ +55�?? Relative humidity: �?�95% Equipment Classification Class II, internal power supply, Type CF IP Classification IPX4 Dimension 140mm (L) �?157mm(W) �?220mm(H) Weight 1.8kg (net weight) penny at csbeyond.com -
Product Description: CMEP-OL oil less explosion proof refrigerant recovery machine is specially designed for light hydorcarbon refrigerants,such as R600,R600A and R290,etc.It's suitable for the service of household A/C,fridge and oil extraction. Unique Advantages: 1.Specially designed for ligh hydrocarbon(HC Refrigerants) 2.Food grade material and PTFE seal 3.explosion and leak proof design with UL listed explosion proof motor 4.1HP oil less dual cylinder high efficiency compresor for 24 hours running 5.high pressure protection for safety with deep ultimate vacuum 6.Vapor recovery rate:less than 71.6Kg/h(2.63lbs/min) 7.All of the fitting is designed according to UL explosion proof standard 8.Voltage: 115V 60Hz 9.Weight:43Kg Company Information: CM refrigerant recovery systems(recovery/recharge/reclaim/vacuum/etc) are widely used in the field of HVAC/R. CM is a comprehensive hi-tech. Enterprise specialized in R&D, manufacture, sales of products for HVAC/R industry. CM factory, Nanjing Wonfulay Precision Machinery Company Ltd, is located in Nanjing, China. Ever since its establishment in 1990s,CM dedicates itself to R&D and manufacturer of refrigerant recovery systems(recovery/recharge/reclaim/vacuum/etc). With its unremitting efforts and more than 20 years of experience, their refrigerant recovery systems have got several national and international patents and their machines have earned good reputation among the customers. Refrigerant recovery machine of CM are sold all over the world in 46 countries. CM recovery systems have got ISO and CE certificate and all the machines are made according to the ARI 740 standard. CM has established long term and harmonious cooperation relationships with YORK, MIDEA ,CARRIER, MCQUAY, etc. CM is your trustworthy partner. Our aim is to become you environmental service helper and your financial manager who will supply you commercial, residential and customized refrigerant recovery equipments (recovery/recharge/reclaim/vacuum/etc) worldwide.
Salient Features Submerged in water permantatly so no need of separate cabin Compact design suitable for minimum water level It also works on low voltage Noiseless and vibration free operation Installation without foot valve Easy installation and servicing MOTOR BODY : Stainless Steel with 1% Nickel / Graded Cast Iron STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour SHAFT : Stainless Steel 420 H&T TRUST BEARING : Stainless steel 304 tilting pad segment with carbon plate SEAL : Nitrile Rubber Oil Seal IMPELLER / ROTOR : Dynamically balanced WINDDING WIRE: Poly wrape Double coated copper wire
Salient Features Submerge in water permanently, so no need of separate cabin Priming is not require It also works on Low Voltage Noiseless and Vibration free operation Supplied with foot valve MOTOR BODY : Stainless Steel with 1% Nickel / Graded Cast Iron STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour TRUST BEARING : Thrust Plate With Fiber Pad and CT Bearing of Gunmetal BUSH BEARING : GM LTB 4 SEAL : Nitrile Rubber Oil Seal ROTOR SHAFT : Stainless Steel 420 H&T IMPELLER : Dynamically balanced WINDDING WIRE : Poly Wrap Double coated copper wire HP 0.5 HP to 2.0 HP HEAD 7.5 Mtrs to 32.5 Mtrs CAPACITY :40 LPM to 480 LPM VOLTAGE : AC 180- 240 V, 50 Hz, 2900 RPM NUMBERS OF MODEL 11 Nos. HP 1.0 HP to 30 HP HEAD 5 Mtrs to 75 Mtrs CAPACITY 40 LPM to 5200 LPM VOLTAGE : AC 300- 415 V, 50 Hz, 2900 RPM NUMBERS OF MODEL 166 Nos.
Salient Features Squirrel Cage Induction type totally enclosed Motor (TEFC). Single Phase with running Capacitor It also works on Low Voltage Easy installation and easy Servicing MOTOR BODY : Graded Cast Iron STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hourt ROTOR SHAFT : Stainless Steel 420 H&T IMPELLER : Graded Cast Iron and Dynamically Balanced BALL BEARING : Reputed Make ZZ Ball Bearing SEAL : Monoblock Pump with Asbestos Gland Packing & Mechanical Seal WINDING : Super enameled EC Grade Copper Wire HP 0.5 HP to 2.0 HP HEAD 6 Mtrs to 28 Mtrs CAPACITY 25: 550 LPM VOLTAGE : AC 180: 240 V, 50 Hz, 2900 RPM NUMBERS OF MODEL 24 Nos. HP 0.5 HP to 25 HP HEAD 6 Mtrs to 86 Mtrs CAPACITY 25: 2100 LPM VOLTAGE : AC 300- 415 V, 50 Hz, 2900 RPM NUMBERS OF MODEL 53 Nos.
