Qj submersible deep well pumps, submersible pumps, multistage submersible pump Product description: Qj submersible pump is directly connected with motor, which applies to groundwater extraction from deep wells. It can also be used in rivers, reservoirs, canals and other water projects. The pump is mainly used for irrigation and the mountain plateau drinking water and also for the cities, factories, railways, mines, construction sites for drainage and water supply. Main features: 1.Motor, pump are put into operation in the water, so the safety and reliability are ensured. 2. There is no special requirement for the materials of the tube and pipe. Web:www.Zlby.Net/ Packed in standard wooden case
Operating condistions Minimum well diameter: 2.5" Maximum fluid temperature up to: +35ºC Maximum sand content: 0.25% Specifications Rewindable motor or fully enclosed shielding motor Single-phase: 220V-240V/50Hz Dimension complied with NEMA standard Curve tolerance accord with ISO9906...
Model: 3ssw3-78-48-750 Flow: 1m3/h Head: 60m Voltage: dc 48v Power: 750ww Outlet dia/pump dia: 32mm/75mm Packing: packed by carton box -
Supplier: Pump pv22, used korean hyundai & kia engine with gearbox, organic fertilizer, used volvo and scania engine with gearbox, arnold palmer golf shoes
INSTALLATIONS AND USE .For transporting clear water and the liquid which the physical and chemical property similar to water, and the temperature below 20ºC .For ground water supply to private houses,to waterworks and to irrigation systems .For water pressurization .For liquid transfer in tanks PERFORMANCE RANGE .Flow up to 100m³/h .Head up to 402m  OPERATION CONDITIONS .Liquid temperature up to +20ºC .Ambient temperature up to +20ºC .Continuous duty .Maximum sand content 0.25% .Minimum well diameter -4" for 4SP pumps -6" for 6SP pumps -8" for 8SP pumps -10'' for 10SP pumps  ELECTRIC MOTOR .Two-pole induction motor, 50HZ (n=2850rpm) .Single phase ,220-240V .With thermal protector incorporated into the winding .Available with the start control box or automatic control box .Three phase 380V/415V .Insulation Class F .Protection IP68 COMPONENT MATERIALS .External case Stainless steel AISI304 .Discharge head Stainless steel AISI304 .Diffuser Stainless steel AISI304 .Impeller Stainless steel AISI304 .Pump shaft Stainless steel AISI304 .Oil chamber Copper alloy  Main Features                                                   1) Max head ranges from 20 m to 402 m . Max flow rate ranges from 2 m3/h to 100 m3/h with different size to be used in SP PUMP 2) 100% copper wire/ 304 stainless steel shaft 3) Advanced and smart controller 4) 100% testing system for motor/complete set pump/controller, each pump will be tested good before delivery. 5)Installation is simple and convenient, free maintenance 6)Overload protector.When the temperature of the motor is too high, more than the temperature of the Overload protector to protect the water pump will automatically jump out, prevent burning machine.  Pump Checking                                                 EACH PUMP WILL BE TESTED GOOD BEFORE PUMP DELIVERY. Product Application Submersible water pump for deep well is widely used for deep well, farmland irrigation, spray irrigation, urban and rural industry enterprise and drainage ect. Skysea people practice the spirit of craftsmen, pursue excellence, and insist on continuous innovation and improvement. The company from raw materials into the factory, parts processing to pump assembly testing out of the factory, all use advanced testing instruments, perfect technical means, standardized operation process, to ensure that each part, each product meets the technical requirements, thus ensuring the stable performance and reliable operation of the product.
Material:Cast iron/stainless steel Impeller material:Cast Iron/stainless steel Pressure:Low Pressure Warranty:12 Months Color:Blue Place of Origin: ,China (Mainland) Deep well submersible water pump Overview: deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc. Deep well submersible water pump structure&model meaning 1. Submersible electric pump is composed of five parts: water pump, submersible motor, water line, waterproof cable and control switch. Water pump belongs to single suction multistage vertical centrifugal pump. 2. Submersible motor adopts water-filled wet structure, internal chamber was filled with water for cooling the motor and lubricating the bearing. In the operation, due to the changes of temperature, the pressure of the filled water in the internal chamber also changes, it can be automatically regulated by pressure-regulating unit in the lower part of motor. 3. For preventing the sand getting into the motor, the sand-preventing unit including sand and skeleton oil-sealed was installed in the upper part of motor, the whole motor was sealed tightly. 4. There are water injection hole and exhaust hole in the upper part of the motor and discharge hole in the lower part. 5. There are thrust bearing and thrust collar, mainly for sustaining remnant axial force of pump and the empty weight of motor's rotor. Deep well submersible water pump spare parts &features: Deep well submersible water pump motor and pump assembled into one. Deep well submersible water pump has simple structure, easy to use and maintenance. Electric motor is three-phase asynchronous motor.
Flow: 20m3/h Head: 78m Power: 7.5kw Material: cast iron Medium: clean water Outlet dia: 60mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue Deep well submersible water pump Overview: Filed with: water Flow range: 10—250m3/h; Head range:5—121m; Diameter scope:f30—f150mm; Temperature range: =30?. Deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc. Deep well submersible water pump spare parts &features: Deep well submersible water pump motor and pump assembled into one. Deep well submersible water pump has simple structure, easy to use and maintenance. Electric motor is three-phase asynchronous motor. Safe and reliable operation, no pollution to water. Installation of deep well submersible water pump 1. 380V voltage deviation is no more than ±5%, frequency is 50HZ, three -phase power deviation is no more than ±1%. 2. Motorcavity must be filled with water to cooling motor and lubricate bearings . 3. The first stage impeller of the pump should be more than 2mm below the moving water surface, pump unit should be less than 70m below the static water level. 4. The distance from the motor bottom to well bottom must be more than 3m. 5. Water temperature should be no more than 20°C. 6. Sand content of the water ( by mass) should be no more than 0.01%. 7. PH value of water 6.5-8.5. 8. Hydrogen sulfide content of the water should be no more than 1.5mg/L. 9. Chloride ion content of the water should be no more than 400mg/L. 10. Water yield of water source should ensure the requirements of pump continuous working.
Supplier: Fuel like diesel en590, jet fuel a1, lngg, lpg, copper cathode, a7 ingots, used rails, agri products like sugar, wheat, rice, soyabean etc, sunflower oil, valves & fasteners, spare parts for machineries. construction equipments like concrete machines, crushers, sand washing plants, material handling equipments, and construction materials, coal, diesel, machineries, tyres, generators, tyre shredder machines, fasteners, valves, epoxy, chemicals
Services: Exporter
SUBMERSIBLE DEEP WELL PUMP END FOR SP SERIES 4 INCH, 6INCH, 8INCH. WITH VARIETY OF MODELS COVERING 4SP 01/02/03/05/08/14 M3 per hour, 6SP 17/30/46/60 m3 per hour, 8SP 77/95 m3 per hour. MATERIAL UNDER STAINLESS STEEL SUS304 and SUS316 MADE. FLOW RATES UP TO 120 m3 per hour HEAD UP TO 320 meters PH RANGE: FROM 6 TO 8 LIQUID TEMP. UP TO 35 celcius degree PACKAGE: 1PC /POLY BAG /NEUTRAL CARTON OR WOODEN CASE OR CYLINDER PACK GUARANTEE: 1YEAR FOB NINGBO PORT OR SHANGHAI PORT
