SPECIFICATION: Liquid temperature up to 40 Max. Ambient temperature:40 Max. Suction: 8m Insulation Class: B/F Protection Grade: IPX4 Pump body &Support: Cast iron with brass/AISI304/Steel Insert Motor housing:Aluminium Shaft: AISI304 Winding: Copper Impeller: Brass...
Monoblock pumps - Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features - High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP - Specially designed for wide voltage operation - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life - Back pull-out design for easy servicing and repair - Double shielded ball bearings, so no need of external lubrication - All Model fitted to Mechanical seal. specification - Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 32 Mtr. - Maximum Flow Rate : 940 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Method of Starting : Permanent Split Capacitor (PSC) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm) characteristics of clear cold water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : EN-8 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Plastic
Monoblock Pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - Mechanical seal is provided as per customers requirement Specification - Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 65 Mtr. - Maximum Flow Rate : 1450 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 100 X 80 and 100 X 100 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 mÃ?/sec (max.) - Ph Value : 6.5 to 8.5 Material of construction - motor Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminium
Monoblock pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. specification - Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 12 Mtr. - Maximum Flow Rate : 3160 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase - Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminum
APPLICATIONS : Domestic , Gardens, Irrigation, Hotels, Appartments, and Sprinkler Irrigation Structural Characteristics Pump Casting : Grey Iron Casting Impeller : Gun Metal/c Shaft : En8/ss 410 Mechanical : High Alumina Ceramic And Graphite Motor Body : Aliminium Extruded / C MAXIMUM OPERATING CONDITIONS Max.Suc Head : 7 Mtrs Pumping : Medium Clean Water Free From Solids, Chemically And Mechanically Non- Aggresive Liquid Temperature
SPECIFICATION: Liquid temperature up to 40 Max. Ambient temperature:40 Max. Suction: 8m Insulation Class: B/F Protection Grade: IPX4 Pump body &Support: Cast iron with brass/AISI304/Steel Insert Motor housing:Aluminium Shaft: AISI304 Winding: Copper Impeller: Brass…
Specifications Top quolity diesel water irrigation pump 1.high suction head 3.stainless steel, cast iron impeller 4.sewage pump pass 76mm 1.Beautiful shape and fine structure,reliable performance. 2.With strong capacity of delf priming, no need to equip with flap valve. 3.Non-clog, and with powerful capacity of passing big solid.. 4.The hole can make sure that stronger sewage can be cleaned quickly when pump is jammed. 5.The unique lubrication oil mechanical seal cavity makes the performance more reliable. 6.Special check valve structure can make the pump working quickly. 7. When working, the gas and liquid works together . 8. Low rotary speed,reliable operation,long time usage, easy to maintenance. 9.Advanced pressure protector make pump the pump work safe. 1.Inlet/Outlet 2''(50mm), 3''(75mm), 4''(100mm), 6''(150mm), 8''(200mm), 10''(250mm), 12''(300mm) 2.Impeller Diameter 158.74mm-457.2mm 3.Rotary Speed 550RPM-2150 RPM 4.Flow Rates 8m3/h-1275m3/h 20GPM-5500GPM 5.Head 6m-63m 6.Horsepower 1HP-125HP 7.N.W 92KG-998KG 8.G.W 114KG-1066KG 9.Solid Passing 20.63mm-76.2mm 10.Material Cast Iron, ADI, CD4MCU, 316 SS, Alloy 20, C276. 11.Diesel Driving Water cooled or air cooled 12.Method of Connection Self-priming pumps are available as basic units or may be flex-coupled, V-belt driven or engine mounted. 13.Drive Variation Cummins, Deutz, Ricardo, Perkins or Chinese Diesel, Electric Motor 14.Skid Mounted on Trailer 2 or 4 wheels Trailer/Trailor,Cart 15.Package Exporting plywood case 16.Certification CE , ISO9001:2000 Standard export wooden
Max Flow Rate Up to 50 m3 / hr Head - Up to 45 mtr Temp - Up to 65-70 dig C MOC - PP, UHMWPE RPM - 1440-2880 Type - Mechanical Seal / Gland Type Our company has created a niche in the field of offering Centrifugal Polypropylene Pump. Application: Water Treatment Plant, Effluent Treatment Plant, Transfer And Loading I Unkaing like HcL Sulphuric Add, Caustic Liquid Scrubbing Of Corrosive Gasses like Nh3, Cot, Sot, 1.2, F2, &2 Etc. Eller Press For Oyes & Chemicals. Circtiation Of Chemicals In Metal Finishing Industry.
Shinjo Valves-G Series Inline Centrifugal Pump Summary G Series Inline Centrifugal Pump G series inline centrifugal pump is also be called Gseries single-stage and single-suction vertical centrifugal pump, whose performance accords with International Standard of IS02825, and is designed according to latest National Industry Standard of JB/T6878.1 -93. Its efficiency is average higher 3-5% compared with the parameter of JB/T6878.2-93. It is the power saving new product replacing former SG series inline pump. Its max. operating pressure is no higher than 1.0 MPa. Suction pressure is no higherthan 0.2MPa. Performance range: capacity 3.2 - 400m3/h head10-80m Materials contacted with liquid can be selected according to the condition which medium is corrosive to pump. Main part materials contacted with liquid as follows: Except above materials, other applied materials and code selected by customers must accord to Standard GB2100-80. Material code that is not specified by National Standard may use international general material code or nation widely regarded material code ( such as industry or our Company specification).
Sugar cane juice Saline water Series KWP Non-Clogging Centrifugal Pump is a new-generation high-efficiency, energy-saving non-clogging pump made by Tech-Macro with the technology introduced from KSB Co. Description Back pull-out design — allow the rotor to be removed from the pump casing without disturbing the piping or dismantling the casing. Simplify maintenance — allow fast inter change of impeller and wear plate of suction side,thereby permitting pump to be rapidly modified to suit different operating conditions. Specifications Size: 40-500mm(1.5-20 inches) Capacity: 10-4300 m3/h Head: 5-100m Temperature: 0-120 °C Material: Cast iron, Ductile cast iron, SS316, SS304 Application Type KWP pump is of single-stage,centrifugal pump which is specially used for the city water supply, sewage treatment, chemicals, paper and wood, sugar & food processing, and the like. Note:It normally is suitable for delivering the neutral media (PH value is 6-8 about). Impeller: The series KWP pump is supplied with 4 kinds of impeller for selection.
