Overview
Type NDX pump is applicable for pumping clean water and liquids whose physical and chemical properties are similar to water and without solid particles.
This series of products can be used in factories,mines,urban water supply and drainage,HAVC,industrial softened water and farmland irrigation and drainage,etc.It can also be used in pressure stabilization and water supply systems of urban fire control.
Pump with the same specification can change the performance parameters by cutting the outer diameter of the impeller;the normal speed of the pump is 1450RPM and 2900RPM, if it is required to operate at the maximum speed of 3550RPM(60Hz power supply or with gasoline and diesel engine),our company can provide technical instruction on the change of the outer diameter of the impeller
The type NDX pump features simple structure,reliable performance,small volume,light weight,high efficiency,good ati-cavitation performance, low power consumption and convenient use and maintenance
The pump is suitable for pumping medium at temperature of -10~85â?? and working pressure of 1.0MPa,if there is a need to increase to 1.6MPa or higher,please specify when selecting and ordering
Performance
 Capacity: 5-1650m3/h
 Head: 5-135 m
Product Features
Energy efficient: Applying the most advanced NRCE design software and CFD fluid simulation software to develop and design the high efficiency hydraulic model,through the analysis of pump flow field,temperature field and strength,thermal deformation,fracture,rotor dynamics,etc,to achieve high efficiency ,reliability and wide efficiency zone,we have made the pump satisfy the efficiency and reliability requirements of centrifugal pump operating under design conditions and non-design conditions, reaching the international advanced level.
Rear opening type structure:The maintenance is convenient,It is not necessary to disassemble the suction and discharge pipes during maintenance to pull out the rotor parts for maintenance
Quality assurance:Before casting,the imported chemical analysis of the materials was carried out by the direct reading spectrum analyzer introduced from Britain to ensure that the material composition meets the requirement.The pump impeller and rotor components are tested by precise dynamic balance test,so the pump can run more smoothly, have less vibration and noise and longer service life.
Product orientation:Improve the technical level of the domestic equipment industry, effectively serve equipment and processes to meet the needs of safety,reliability,energy conservation and environmental Protection.
General
ZLB vertical axial flow pump is a new generation of small and medium-sized axial flow pump developed by our company. This pump head is low, the flow is large,this series of products has a wide spectrum,good hydraulic performance and novel structure,it is characterized by high efficiency,good cavitation performance,easy installation and maintenance;and the same time,combined with the latest information control technology,the intelligent water pump system independently developed can be configured,with automatic monitoring function,the design,manufacture,and quality of this series product meet the standard of GB/T13008 Technical condition for mixed-flow pump and axial-flow pump
Application
This series of products can be used for clean water or other liquids with physical and chemical properties close to water whose temperature of conveying medium is no more than 50.They are widely used in large-scale water conservancy projects, farmland irrigation,industrial conveying water,The thermal power station carries circulating water, shipyard level,urban water supply and drainage and water diversion projects
Working condition
The medium:clear water,rain water,river water,sewage waste water,any of various liquids whose physicochemical properties resemble those of water
Medium temperature:50
 Running mode: power frequency or frequency conversion
Direction of rotation:from the drive end,the pump is rotated in clockwise
Installation:vertical single foundation,vertical double foundation
Structure advantages
1.Guide bearding
Standard with high quality rubber guide bearings with small friction coefficient, vibration absorption and especially suitable for axial flow pump
The lower guide bearing adopts lengthened structure with better length-diameter ratio, which greatly improves the stability of rotor parts;
Designed with enough lubricating flume,and good cooling lubrication effect
2.Outlet bending tube
Precision casting,reasonable radius of curvature,internal passage smooth transition,performance optimization
The design of the multi-rib structure increases the strength and the rigidity of the body
Reasonable hoisting hole design,convenient hoisting
3.Impeller chamber
Precision casting,internal passage smooth transition,performance optimization
Half structure for easy maintenance
4.Thrust bearding unit
Under conventional working condition,the heat radiation rib of the outer circle radiates heat,so that the external water receiving difficulty in the field is solved
Under special working conditions,increase the heat radiation of the coil to ensure that the unit runs for a long time
Equipped with on-line vibration measurement and temperature measurement device to ensure safe running
General
ZLB vertical axial flow pump is a new generation of small and medium-sized axial flow pump developed by our company. This pump head is low, the flow is large,this series of products has a wide spectrum,good hydraulic performance and novel structure,it is characterized by high efficiency,good cavitation performance,easy installation and maintenance;and the same time,combined with the latest information control technology,the intelligent water pump system independently developed can be configured,with automatic monitoring function,the design,manufacture,and quality of this series product meet the standard of GB/T13008 Technical condition for mixed-flow pump and axial-flow pump
Â
Application
This series of products can be used for clean water or other liquids with physical and chemical properties close to water whose temperature of conveying medium is no more than 50.They are widely used in large-scale water conservancy projects, farmland irrigation,industrial conveying water,The thermal power station carries circulating water, shipyard level,urban water supply and drainage and water diversion projects
Working condition
The medium:clear water,rain water,river water,sewage waste water,any of various liquids whose physicochemical properties resemble those of water
 Medium temperature: 50
 Running mode: power frequency or frequency conversion
Direction of rotation:from the drive end,the pump is rotated in clockwise
Installation:vertical single foundation,vertical double foundation
Structure advantages
1.Guide bearding
â??Standard with high quality rubber guide bearings with small friction coefficient, vibration absorption and especially suitable for axial flow pump
The lower guide bearing adopts lengthened structure with better length-diameter ratio, which greatly improves the stability of rotor parts;
Designed with enough lubricating flume,and good cooling lubrication effect
2.Outlet bending tube
Precision casting,reasonable radius of curvature,internal passage smooth transition,performance optimization
The design of the multi-rib structure increases the strength and the rigidity of the body
Reasonable hoisting hole design,convenient hoisting
3.Impeller chamber
â?? Precision casting,internal passage smooth transition,performance optimization
Half structure for easy maintenance
4.Thrust bearding unit
Under conventional working condition,the heat radiation rib of the outer circle radiates heat,so that the external water receiving difficulty in the field is solved
Under special working conditions,increase the heat radiation of the coil to ensure that the unit runs for a long time
Equipped with on-line vibration measurement and temperature measurement device to ensure safe running
General
ZLB vertical axial flow pump is a new generation of small and medium-sized axial flow pump developed by our company. This pump head is low, the flow is large,this series of products has a wide spectrum,good hydraulic performance and novel structure,it is characterized by high efficiency,good cavitation performance,easy installation and maintenance;and the same time,combined with the latest information control technology,the intelligent water pump system independently developed can be configured,with automatic monitoring function,the design,manufacture,and quality of this series product meet the standard of GB/T13008 Technical condition for mixed-flow pump and axial-flow pump
Application
This series of products can be used for clean water or other liquids with physical and chemical properties close to water whose temperature of conveying medium is no more than 50.They are widely used in large-scale water conservancy projects, farmland irrigation,industrial conveying water,The thermal power station carries circulating water, shipyard level,urban water supply and drainage and water diversion projects
Working condition
 The medium:clear water,rain water,river water,sewage waste water,any of various liquids whose physicochemical properties resemble those of water
 Medium temperature: 50
 Running mode: power frequency or frequency conversion
Direction of rotation:from the drive end,the pump is rotated in clockwise
Installation:vertical single foundation,vertical double foundation
Structure advantages
1.Guide bearding
Standard with high quality rubber guide bearings with small friction coefficient, vibration absorption and especially suitable for axial flow pump
The lower guide bearing adopts lengthened structure with better length-diameter ratio, which greatly improves the stability of rotor parts;
Designed with enough lubricating flume,and good cooling lubrication effect
2.Outlet bending tube
Precision casting,reasonable radius of curvature,internal passage smooth transition,performance optimization
The design of the multi-rib structure increases the strength and the rigidity of the body
Reasonable hoisting hole design,convenient hoisting
3.Impeller chamber
Precision casting,internal passage smooth transition,performance optimization
Half structure for easy maintenance
4.Thrust bearding unit
Under conventional working condition,the heat radiation rib of the outer circle radiates heat,so that the external water receiving difficulty in the field is solved
Under special working conditions,increase the heat radiation of the coil to ensure that the unit runs for a long time
Equipped with on-line vibration measurement and temperature measurement device to ensure safe running
General
ZLB vertical axial flow pump is a new generation of small and medium-sized axial flow pump developed by our company. This pump head is low, the flow is large,this series of products has a wide spectrum,good hydraulic performance and novel structure,it is characterized by high efficiency,good cavitation performance,easy installation and maintenance;and the same time,combined with the latest information control technology,the intelligent water pump system independently developed can be configured,with automatic monitoring function,the design,manufacture,and quality of this series product meet the standard of GB/T13008 Technical condition for mixed-flow pump and axial-flow pump
Application
This series of products can be used for clean water or other liquids with physical and chemical properties close to water whose temperature of conveying medium is no more than 50.They are widely used in large-scale water conservancy projects, farmland irrigation,industrial conveying water,The thermal power station carries circulating water, shipyard level,urban water supply and drainage and water diversion projects
Working condition
The medium:clear water,rain water,river water,sewage waste water,any of various liquids whose physicochemical properties resemble those of water
 Medium temperature: 50
Running mode: power frequency or frequency conversion
Direction of rotation:from the drive end,the pump is rotated in clockwise
Installation:vertical single foundation,vertical double foundation
Structure advantages
1.Guide bearding
Standard with high quality rubber guide bearings with small friction coefficient, vibration absorption and especially suitable for axial flow pump
The lower guide bearing adopts lengthened structure with better length-diameter ratio, which greatly improves the stability of rotor parts;
Designed with enough lubricating flume,and good cooling lubrication effect
2.Outlet bending tube
Precision casting,reasonable radius of curvature,internal passage smooth transition,performance optimization
The design of the multi-rib structure increases the strength and the rigidity of the body
Reasonable hoisting hole design,convenient hoisting
3.Impeller chamber
Precision casting,internal passage smooth transition,performance optimization
Half structure for easy maintenance
5791 Industrial Pumps Suppliers
Short on time? Let Industrial Pumps sellers contact you.
General
Type GSX series product is characterized by broad comprehensive performance curve,sound hydraulic performance, novel structure,high efficiency,high reliability,low net positive suction head ,and low maintenance.
The design,manufacture,and quality of this series product meet the standard of GB/T5656â??Technical conditions for centrifugal pumps-Class IIâ??and its efficiency indexes meet the standard of GB/T19762â??The minimum allowable values of energy efficiency and evaluating values of energy conservation of centrifugal pump for fresh waterâ??
Application
GSX series products are mainly used for transport fresh water or other liquid with similar physicochemical properties to fresh water,it can also be widely applied in water supply and drainage system or circulation cooling water system for steel,petrochemical,thermal power generation,mining,and other working conditions
Performance range
 Capacity 95~9000m3/h
Head 6~205m
 Temperature 80 cooling structure will be adopted for bearing, the material of casing & cover is QT500-7 150
 Speed 740~2970r/min
Inlet diameter 125~900mm
Outlet diameter 80~900mm
Structural feature
1.Sealing
Superior mechanical seal,long term operation without leakage
Mechanical seal,strong interchangeability for universal use by non-asbestos soft packing structure and injection type packing structure
Stainless steel shaft sleeve for easy maintenance
Half packing gland,large space for packing replacement
2.Protective cover
Half-split structure,comply with IE standard,safe and reliable
3.Casing
Circular pressure chamber design with high efficiency
Double-volute pumping chamber is with balanced radial force and sound strength; bearing and seal are with small force withstanding and long service life
Water suction chamber is with split rib design;inlet is without vortex and noise while with stable operation and sound cavitation performance
The inlet and outlet water channels are coated with smooth wear-resistant coating,and water loss is small
Auto-correct pump cover for easy installation
Inlet DN 500 for universal use by vertical and horizontal types
4.Bearing
Short span and enlarged diameter design, stable operation and long service life.
Grease lubrication with small and medium pump,online refueling
Provided with online vibration and temperature measuring devices to ensure safety operation
Transfer high temperature liquid,employ water-cooling structure
5.Shaft
Bold design,universal use for 50HZ and 60HZ pump shaft,sound rigidity, and stable operation
Full sealing design, no contact with liquid, and easy maintenance
Allow short-time inversion, common shaft for forward and reverse rotations
General
Type GSX series product is characterized by broad comprehensive performance curve,sound hydraulic performance, novel structure,high efficiency,high reliability,low net positive suction head ,and low maintenance.
The design,manufacture,and quality of this series product meet the standard of GB/T5656 Technical conditions for centrifugal pumps-Class II and its efficiency indexes meet the standard of GB/T19762 The minimum allowable values of energy efficiency and evaluating values of energy conservation of centrifugal pump for fresh water
Application
GSX series products are mainly used for transport fresh water or other liquid with similar physicochemical properties to fresh water,it can also be widely applied in water supply and drainage system or circulation cooling water system for steel,petrochemical,thermal power generation,mining,and other working conditions
Performance range
 Capacity 95~9000m3/h
Head 6~205m
Temperature 80 cooling structure will be adopted for bearing, the material of casing & cover is QT500-7 150
Speed 740~2970r/min
Inlet diameter 125~900mm
 Outlet diameter 80~900mm
Structural feature
1.Sealing
Superior mechanical seal,long term operation without leakage
Mechanical seal,strong interchangeability for universal use by non-asbestos soft packing structure and injection type packing structure
Stainless steel shaft sleeve for easy maintenance
Half packing gland,large space for packing replacement
2.Protective cover
Half-split structure,comply with IE standard,safe and reliable
3.Casing
Circular pressure chamber design with high efficiency
Double-volute pumping chamber is with balanced radial force and sound strength; bearing and seal are with small force withstanding and long service life
Water suction chamber is with split rib design;inlet is without vortex and noise while with stable operation and sound cavitation performance
The inlet and outlet water channels are coated with smooth wear-resistant coating,and water loss is small
Auto-correct pump cover for easy installation
Inlet DN 500 for universal use by vertical and horizontal types
Â
4.Bearing
Short span and enlarged diameter design, stable operation and long service life.
Grease lubrication with small and medium pump,online refueling
Provided with online vibration and temperature measuring devices to ensure safety operation
Transfer high temperature liquid,employ water-cooling structure
5.Shaft
Bold design,universal use for 50HZ and 60HZ pump shaft,sound rigidity, and stable operation
Full sealing design, no contact with liquid, and easy maintenance
Allow short-time inversion, common shaft for forward and reverse rotations
General
Type GSX series product is characterized by broad comprehensive performance curve,sound hydraulic performance, novel structure,high efficiency,high reliability,low net positive suction head ,and low maintenance.
The design,manufacture,and quality of this series product meet the standard of GB/T5656 Technical conditions for centrifugal pumps-Class II and its efficiency indexes meet the standard of GB/T19762 The minimum allowable values of energy efficiency and evaluating values of energy conservation of centrifugal pump for fresh water
Application
GSX series products are mainly used for transport fresh water or other liquid with similar physicochemical properties to fresh water,it can also be widely applied in water supply and drainage system or circulation cooling water system for steel,petrochemical,thermal power generation,mining,and other working conditions
Performance range
Capacity 95~9000m3/h
 Head 6~205m
Temperature 80 cooling structure will be adopted for bearing, the material of casing & cover is QT500-7 150
 Speed 740~2970r/min
 Inlet diameter 125~900mm
 Outlet diameter 80~900mm
Structural feature
1.Sealing
Superior mechanical seal,long term operation without leakage
Mechanical seal,strong interchangeability for universal use by non-asbestos soft packing structure and injection type packing structure
Stainless steel shaft sleeve for easy maintenance
Half packing gland,large space for packing replacement
2.Protective cover
Half-split structure,comply with IE standard,safe and reliable
Ã?Â
3.Casing
Circular pressure chamber design with high efficiency
Double-volute pumping chamber is with balanced radial force and sound strength; bearing and seal are with small force withstanding and long service life
Water suction chamber is with split rib design;inlet is without vortex and noise while with stable operation and sound cavitation performance
The inlet and outlet water channels are coated with smooth wear-resistant coating,and water loss is small
Auto-correct pump cover for easy installation
Inlet DN 500 for universal use by vertical and horizontal types
4.Bearing
Short span and enlarged diameter design, stable operation and long service life.
Grease lubrication with small and medium pump,online refueling
Provided with online vibration and temperature measuring devices to ensure safety operation
Transfer high temperature liquid,employ water-cooling structure
5.Shaft
Bold design,universal use for 50HZ and 60HZ pump shaft,sound rigidity, and stable operation
Full sealing design, no contact with liquid, and easy maintenance
Allow short-time inversion, common shaft for forward and reverse rotations
Overview
It has many obvious advantage such as compact structure,no overload,high efficiency and energy saving,high reliability,high stability,anti-winding,no clogging,automatic coupling,automatic protection and automatic control,it has unique functions in transporting various kinds of sewage or insoluble solid-phase mixed liquids containing solid particles and sediment.
The design,manufacturing and quality of this series of products comply with GB/T24674â??Waste submersible motor-pumpsâ??standards,CJ/T472â??Submersible sewage pumpâ??standards,and its efficiency index reaches GB32031â??Minimum allowable values of energy efficiency and energy efficiency grades for waste submersible motor-pumpsâ??standards.
Application
This series of products are mainly used to transport various types of sewage,wastewater,rainwater,or other insoluble solid phase mixed liquids containing solid particles, sediment,fiber,and so on. The products are widely used in urban sewage treatment plant drainage system,factory commercial heavily polluted wastewater discharge,residential area sewage drainage,civil air defense system drainage,hospital and hotel sewage drainage,complete auxiliary machinery drainage for hydropower station,auxiliary drainage for water conservancy pump stations,exploration,mining supporting equipment,waterworks water supply equipment, municipal engineering,construction site,subway station drainage and other industries
Working condition
Outlet diameter:DN100mm-DN900mm
Rated voltage:380V or 660Vã??3KVã??6KVã??10KV,etc
Frequency:50Hz three-phase AC power
Medium temperature: â?¤42â??,densityâ?¤1200kg/m3
pH value:within the range of 4-10
Volume ratio of solid phaseâ?¤5%
Maximum flow capacity:the diameter of the solid in the medium should not be greater
than 80% of the minimum size of the impeller passage
Corrosive medium requirements:The products can not be used fro pumping media that
are highly corrosive or contain strong abrasive solid particles.
Overview
It has many obvious advantage such as compact structure,no overload,high efficiency and energy saving,high reliability,high stability,anti-winding,no clogging,automatic coupling,automatic protection and automatic control,it has unique functions in transporting various kinds of sewage or insoluble solid-phase mixed liquids containing solid particles and sediment.
The design,manufacturing and quality of this series of products comply with GB/T24674â??Waste submersible motor-pumpsâ??standards,CJ/T472â??Submersible sewage pumpâ??standards,and its efficiency index reaches GB32031â??Minimum allowable values of energy efficiency and energy efficiency grades for waste submersible motor-pumpsâ??standards.
Application
This series of products are mainly used to transport various types of sewage,wastewater,rainwater,or other insoluble solid phase mixed liquids containing solid particles, sediment,fiber,and so on. The products are widely used in urban sewage treatment plant drainage system,factory commercial heavily polluted wastewater discharge,residential area sewage drainage,civil air defense system drainage,hospital and hotel sewage drainage,complete auxiliary machinery drainage for hydropower station,auxiliary drainage for water conservancy pump stations,exploration,mining supporting equipment,waterworks water supply equipment, municipal engineering,construction site,subway station drainage and other industries
Working condition
Outlet diameter:DN100mm-DN900mm
Rated voltage:380V or 660V 3KV 6KV 10KV,etc
Frequency:50Hz three-phase AC power
Medium temperature: 42,densityâ 1200kg/m3
pH value:within the range of 4-10
Volume ratio of solid phase 5%
Maximum flow capacity:the diameter of the solid in the medium should not be greater
than 80% of the minimum size of the impeller passage
Corrosive medium requirements:The products can not be used fro pumping media that are highly corrosive or contain strong abrasive solid particles.
Overview
It has many obvious advantage such as compact structure,no overload,high efficiency and energy saving,high reliability,high stability,anti-winding,no clogging,automatic coupling,automatic protection and automatic control,it has unique functions in transporting various kinds of sewage or insoluble solid-phase mixed liquids containing solid particles and sediment.
The design,manufacturing and quality of this series of products comply with GB/T24674â??Waste submersible motor-pumpsâ??standards,CJ/T472â??Submersible sewage pumpâ??standards,and its efficiency index reaches GB32031â??Minimum allowable values of energy efficiency and energy efficiency grades for waste submersible motor-pumps standards.
Application
This series of products are mainly used to transport various types of sewage,wastewater,rainwater,or other insoluble solid phase mixed liquids containing solid particles, sediment,fiber,and so on. The products are widely used in urban sewage treatment plant drainage system,factory commercial heavily polluted wastewater discharge,residential area sewage drainage,civil air defense system drainage,hospital and hotel sewage drainage,complete auxiliary machinery drainage for hydropower station,auxiliary drainage for water conservancy pump stations,exploration,mining supporting equipment,waterworks water supply equipment, municipal engineering,construction site,subway station drainage and other industries
Working condition
Outlet diameter:DN100mm-DN900mm
â?? Rated voltage:380V or 660Vã??3KVã??6KVã??10KV,etc
â??Frequency:50Hz three-phase AC power
â?? Medium temperature: â?¤42â??,densityâ?¤1200kg/m3
â??pH value:within the range of 4-10
â??Volume ratio of solid phaseâ?¤5%
â??Maximum flow capacity:the diameter of the solid in the medium should not be greater
than 80% of the minimum size of the impeller passage
Corrosive medium requirements:The products can not be used fro pumping media that are highly corrosive or contain strong abrasive solid particles.
General
Type GSX series product is characterized by broad comprehensive performance curve,sound hydraulic performance, novel structure,high efficiency,high reliability,low net positive suction head ,and low maintenance.
The design,manufacture,and quality of this series product meet the standard of GB/T5656 Technical conditions for centrifugal pumps-Class II and its efficiency indexes meet the standard of GB/T19762. The minimum allowable values of energy efficiency and evaluating values of energy conservation of centrifugal pump for fresh water.
Application
GSX series products are mainly used for transport fresh water or other liquid with similar physicochemical properties to fresh water,it can also be widely applied in water supply and drainage system or circulation cooling water system for steel,petrochemical,thermal power generation,mining,and other working conditions
Structural feature
1.Sealing
Superior mechanical seal,long term operation without leakage
Mechanical seal,strong interchangeability for universal use by non-asbestos soft packing structure and injection type packing structure
Stainless steel shaft sleeve for easy maintenance
Half packing gland,large space for packing replacement
2.Protective cover
Half-split structure,comply with IE standard,safe and reliable
3.Casing
Circular pressure chamber design with high efficiency
Double-volute pumping chamber is with balanced radial force and sound strength; bearing and seal are with small force withstanding and long service life
Water suction chamber is with split rib design;inlet is without vortex and noise while with stable operation and sound cavitation performance
The inlet and outlet water channels are coated with smooth wear-resistant coating,and water loss is small
Auto-correct pump cover for easy installation
Inlet DN 500 for universal use by vertical and horizontal types
4.Bearing
Short span and enlarged diameter design, stable operation and long service life.
Grease lubrication with small and medium pump,online refueling
Provided with online vibration and temperature measuring devices to ensure safety operation
Transfer high temperature liquid,employ water-cooling structure
5.Shaft
Bold design,universal use for 50HZ and 60HZ pump shaft,sound rigidity, and stable operation
Full sealing design, no contact with liquid, and easy maintenance
Allow short-time inversion, common shaft for forward and reverse rotations
Overview
It has many obvious advantage such as compact structure,no overload,high efficiency and energy saving,high reliability,high stability,anti-winding,no clogging,automatic coupling,automatic protection and automatic control,it has unique functions in transporting various kinds of sewage or insoluble solid-phase mixed liquids containing solid particles and sediment.
The design,manufacturing and quality of this series of products comply with GB/T24674â??Waste submersible motor-pumpsâ??standards,CJ/T472â??Submersible sewage pumpâ??standards,and its efficiency index reaches GB32031â??Minimum allowable values of energy efficiency and energy efficiency grades for waste submersible motor-pumpsâ??standards.
Application
This series of products are mainly used to transport various types of sewage,wastewater,rainwater,or other insoluble solid phase mixed liquids containing solid particles, sediment,fiber,and so on. The products are widely used in urban sewage treatment plant drainage system,factory commercial heavily polluted wastewater discharge,residential area sewage drainage,civil air defense system drainage,hospital and hotel sewage drainage,complete auxiliary machinery drainage for hydropower station,auxiliary drainage for water conservancy pump stations,exploration,mining supporting equipment,waterworks water supply equipment, municipal engineering,construction site,subway station drainage and other industries
Working condition
â?? Outlet diameter:DN100mm-DN900mm
â?? Rated voltage:380V or 660Vã??3KVã??6KVã??10KV,etc
â??Frequency:50Hz three-phase AC power
â?? Medium temperature: â?¤42â??,densityâ?¤1200kg/m3
â??pH value:within the range of 4-10
â??Volume ratio of solid phaseâ?¤5%
â??Maximum flow capacity:the diameter of the solid in the medium should not be greater
than 80% of the minimum size of the impeller passage
â??Corrosive medium requirements:The products can not be used fro pumping media that
are highly corrosive or contain strong abrasive solid particles.
CQB Series Lined FEP (F46) Magnetic Driven Pump ( Up to Q: 100m3/h ,H:32m )
Usage : it is widely used in petrochemical ,acid & alkali ,non-ferrous metal smelting,manufacturing process of pickling ,rare earth�separation ,pesticides ,due , medicine ,fuel ,paper--making ,electroplating ,electronics, turned to foil ,national defense industry ,the nuclear power industry and other industries and precious liquid , toxic liquid , and other media transmission .
Model No: CQB50-32-125F
VEICHI provides OEM/ODM Service for TOP Customers.
GS00 Water pump integrated machine
1. Motor-drive integrated structure,convenient installation and maintenance
The controller wraps the surface of the motor to truly achieve an integrated design. Only four screws are required for installation; the motor and the fan also dissipate heat for the motor and the drive, reducing the fan failure rate.
2. Motor protection function
Multiple inverter basic protection functions; Water pump exclusive protection function(water shortage protection, high and low pressure protection, leakage protection, anti-freeze embroidery protection, sensor disconnection protection)
3. Perfectly drive a variety of pump motors
Perfectly drive a variety of water pump motors such as asynchronous, permanent magnet synchronous, synchronous reluctance, etc.
4. Efficient speed regulating fan
High-efficiency fan dissipates the motor and drive at the same time, with large air volume and low noise.
6. Multiple pump control
The pressure of the pipe network is detected by the host and sent to the auxiliary machine. When the pressure is not enough, the auxiliary machine starts and runs according to the set frequency, and the main machine performs constant pressure PID adjustment.
Applications:
Farmland irrigation, residential water, landscape fountains, swimming pool water supply, desert management
HF Series is an single stage end- suction horizontal chemical centrifugal pump. it is in accordance with international standards ISO2858 and non-metallic Horizontal type pump technology combined with design and manufacturing. Pump body metal shell processing dovetail groove lined with FEP (F46), pump cover, impeller and the sleeve are embedded pieces of metal sintering suppression of the overall outsourcing of fluorine plastic. There are made of HT200 cast iron lining with Teflon PTFE / PEP(F46)/ PFA , impeller made by WCB wrapped by PTFE / PEP(F46)/ PFA, which grantee this type centrifugal pump could widely used in corrosive application and wear well.
Mechanical seal is outside seal, stationary seal is alumina ceramic ( 99.9%)(or silicon nitride ,silicon carbide) , rotating seal is PTFE filling material or according to customer request. It is also can be made cartridge type mechanical seal.
Advantage:
High corrosive, well leak-proof, easy assembly and maintenance.
Application Field :
Acid pickling process
Painting process
Textile ,Dyes industry, etc
Pharmacy & Pesticides
Electroplating industry
Chlorine water and waste water treatment
Petroleum & Pharmaceutical Industry
Chemical Industry
Adding acid process
Non-ferrous metals smelting of electrolyte transport
VEICHI provides OEM/ODM Service for TOP Customers.
GS00 Water pump integrated machine
1. Motor-drive integrated structure,convenient installation and maintenance
The controller wraps the surface of the motor to truly achieve an integrated design. Only four screws are required for installation; the motor and the fan also dissipate heat for the motor and the drive, reducing the fan failure rate.
2. Motor protection function
Multiple inverter basic protection functions; Water pump exclusive protection function(water shortage protection, high and low pressure protection, leakage protection, anti-freeze embroidery protection, sensor disconnection protection)
3. Perfectly drive a variety of pump motors
Perfectly drive a variety of water pump motors such as asynchronous, permanent magnet synchronous, synchronous reluctance, etc.
4. Efficient speed regulating fan
High-efficiency fan dissipates the motor and drive at the same time, with large air volume and low noise.
6. Multiple pump control
The pressure of the pipe network is detected by the host and sent to the auxiliary machine. When the pressure is not enough, the auxiliary machine starts and runs according to the set frequency, and the main machine performs constant pressure PID adjustment.
Applications:
Farmland irrigation, residential water, landscape fountains, swimming pool water supply, desert management
Waste vacuum pump, also named as solids transfer pump. It is a pneumatic slurry transfer vacuum pump for liquid, slurry, and solids transfer. With special structure design, it can be used at tough environmental for solids transfer, high working performance and less maintenance. The pump can transfer material with high gravity and high density, solids content max. up to 80%.
Air operated thread protector is also called Inflatable thread protector. It is used to protect the outer thread of casing and tubing pipe. Its outstanding feature is that its gas nozzle is manufactured on the facade, which can protect the gas nozzle in the pipes loading, unloading and transportation process. The gas nozzle of dismountable inflatable thread protector is on the side, which may damage the gas nozzle. Inflatable thread protector is made from polyurethane containing a stainless steel ring in it, so integral inflatable thread protector is resistant to corrosion, abrasion and oil. It has many advantages, such as fast inflation, easy operation, good air-tightness, lowering consumption and cost. Besides, it can be repeatedly used.
Features:
The Air operated Thread Protectors provide a 360�° grip with greater, evenly divided holding power. - Durability is enhanced because the outside of the protectors does not change; only the inside inflates to provide a better grip on the pin.
-Absence of moving parts, metal clamping bars, or other mechanisms provides a long and virtually maintenance-free life cycle.
-The bottom of each protector contains a rugged buffer.
-Air operated thread protectors provide firm attachment to all thread types for greater operational flexibility.
-Rugged construction makes this protectors resistant to high temperatures and rough handling for a long life cycle.
-Pressurization by air facilitates installation and release for operational efficiency.
