We can supply many spare parts of slurry pump. OEM pump part is welcome.
Material options:
-High Chrome alloy
-Grey Iron
-Cast Iron
-Rubber
-Polyurethane
-OEM Pump Parts:
Metal impeller is made of high chrome alloy, SA05,SA49, anti-abrasive, SA33 anti-corrosive
Rubber impeller is made of SR26,SR55, SR33
Polyurethane material is available.
Brief introduction:
-Spare parts in anti-abrasion high chrome cast iron alloy.
-Largest weight of single workpiece can be 13t.
-Largest outside diameter of workpiece can be 5m
-Manufacture other mechanical parts according to your drawing.
Tobee 100mm vertical submerged chemical pump is mainly used in a variety of sump conditions, It can also be readily applied on floating dewatering or other floating pump platforms. As a true cantilevered vertical slurry pump, TP100RV vertical spindle pump does not have submerged bearings or seals, thus, eliminating the primary failure mechanism for similarly fielded pump lines.
Tobee 100mm vertical submerged chemical pump Specification:
Size: 100mm
Capacity: 40-289m3/h
Head: 5-36m
Speed: 500-1200rpm
Eff.: 62%
Power: Max.75kw
Handling solids: 32mm
Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
Tobee 300mm vertical submerged chemical pump is unique cantilevered design, The sump pumps doesnâ??t need any seal and seal water. The TP300TV pumps are preferred by many customers with special installation requirements and widely applied in sump. Its wear-resistant metal liner could handle abrasive slurries with rough particles and high concentration.
Tobee 300mm vertical submerged chemical pump Specification:
Size: 300mm
Capacity: 288-1267m3/h
Head: 6-33m
Speed: 350-700rpm
Eff.: 50%
Power: Max.200kw
Handling solids: 65mm
Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
Tobee 40mm vertical submerged chemical pump works underwater for delivering heavy concentration abrasive & corrosive slurry with big particles. pump column is made by steel or elastomer covered steel, For rubber lined pump, all wetted parts are made by elastomer for delivering strong corrosion slurry.
Tobee 40mm vertical submerged chemical pump specification:
Size: 40mm
Capacity: 7.2-29m3/h
Head: 4-28.5m
Speed: 1000-2200rpm
Eff.: 40%
Power: Max.15kw
Handling solids: 12mm
Materials: High chrome alloy, Rubber, Polyurethane,Ceramic etc
Tobee 65mm vertical submerged chemical pump is mainly used to transfer high- hardness, strong-corrosion and high-concentration liquids that contain suspended solid particles, The metal lined and elastomer rubber lined is interchageable for different duties, such as finished ores, refuse ores, ashes, cinders, cements, mud, mineral stones and etc.
Tobee 65mm vertical submerged chemical pump Specification:
Tobee 150mm vertical submerged chemical pump are designed for every other tank, pit or hole-in-the-ground slurry handling situation, TP150SV pumps are available in various standard lengths to suit common sump depths, for very deep sumps or where high shaft speeds limit the length of the pump, a suction extension pipe can be fitted to the bottom inlet to extend the depth of the pump by up to 2 metres.
Tobee 150mm vertical submerged chemical pump specification:
Size: 150mm
Capacity: 108-576m3/h
Head: 8.5-40m
Speed: 500-1000rpm
Eff.: 52%
Power: Max.110kw
Handling solids: 45mm
Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
Tobee 250mm vertical submerged chemical pump is centrifugal sump slurry pumps submerged in sump to work.It is designed for delivering abrasive, large particle and high density slurries. The pumps have no need of any shaft seal and sealing water. it can also be operated normally for insufficient suction duties. The submerged depth can be customed as different sump.
Tobee 250mm vertical submerged chemical pump specification:
Size: 250mm
Capacity: 261-1089m3/h
Head: 7-33.5m
Speed: 400-750rpm
Eff.: 60%
Power: Max.200kw
Handling solids: 65mm
Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc
Tobee 200mm vertical submerged chemical pump are an ultra-heavy duty design for continuous operation, the bearing assembly design allows the pumps to operate in very tough conditions without damaging the bearing. Both high chrome alloy and elastomer wet end parts are suitable to the different applications, and the pumps use in many industries, various lengths and suction extensions are available to suit most sump depths.
Tobee 200mm vertical submerged chemical pump Design Features:
Less wear, less corrosion
Wetted components are available in a wide range of alloys and elastomers. Tobee selects the optimum combination of materials for maximum resistance to wear in virtually any industrial application, including those demanding both abrasion and corrosion resistance, and where larger particles or high density slurries are encountered.
Abrasion resistant Ultrachrome T05 alloy.
Abrasion/corrosion-resistant Hyperchrome T49 alloy.
Corrosion-resistant stainless steels.
Natural and synthetic elastomers.
No submerged bearing failures
The robust cantilever shaft avoids the need for lower submerged bearings which are often the source of premature bearing failure.
Heavy duty roller bearings, above mounting plate.
No submerged bearings.
Labyrinth/flinger bearing protection.
Rigid, large diameter shaft.
No shaft sealing problems
The vertical cantilever design requires no shaft seal.
No priming required.
The top and bottom inlet design is ideally suited for â??snoreâ?� conditions.
Less risk of blocking
The screened inlets and large impeller passages reduce the risk of blockages.
Zero ancillary water costs
The vertical cantilever design with no gland or submerged bearings avoids the need for expensive gland or bearing flushing water.
Tobee 200mm vertical submerged chemical pump On-site Applications:
Mining Sump drainage Coal prep Mineral processing
Mill sumps Tunnel Tailings Chemical slurries
Ash handing Paper and Pulp Waste sludge Coarse sand
Lime mud Phosphoric acid Sump Dredging Mill grinding
Alumina Industry Power Plant Potash Fertilizer Plant Other industries
Tobee 6x4 inch gravel pump diesel are a kind of sepecial pump including Feed pump, Discharge pump and Booster pump for MTBM, TBM, EPB, Slurry Shields, and Segment Shields in Tunnelling project, It is designed for continously handling the most difficult higher abrasive slurries which contain too big solids. TG6x4D tunnel Pumps are widely used for delivering gravels, slurries, sands, bentonite, sandy soil, rock, stone, sludge, mud etc
Tobee 6x4 inch gravel pump diesel SPECIFICATIONS:
Size: 6" x 4"
Capacity: 36-250m3/h
Head: 5-52m
Speed:600-1400rpm
NPSHr: 2-5.5m
Handling solids: Max.83mm
Concentration: 58%
Seal arrangement: Packing seal, Expeller seal, mechanical seal
Materials: High chrome alloy, Cast iron, Cast steel, Stainless steel etc
Tobee 8x6 inch gravel pump diesel is a kind of cantilevered single-casing centrifugal pump. Pump body is installed with junction plate and cover plate by clamp, which makes the disassembly convenient and quick. The can be equipped with diesel engines or electric motors driven directly, 8x6 Sand Gravel Pump has the advantages of working stability, little vibration, low hydraulic loss, high efficiency, light weight, simple structure and easy maintenance, It is mainly used for dredging river, pipe-jacking system, sucking gravels, blast slag transporting, ore mining etc
Tobee 10x8 inch gravel pump diesel has rational structure, high efficiency, reliable operation, convenient maintenance and other advantages, It is widely used for conveying abrasive or corrosive slurry, especially for dredging, mining, metallurgy, coal, electric power, building materials, chemical industry and other industrial sectors.
Tobee 12x10 inch gravel pump diesel is a single stage, single casing, centrifugal horizontal pump driven by electric motor diesel engine. Large flow passage allows large particle solids, with advantages of high efficiency, wear resistant, wide flow channel, good ability of NPSH, stable performance, easy assembly, The discharge outlet can be adjusted at any direction, It is worlds standard for dredge, gravel or large particle slurries applications.
Tobee 16x14 inch gravel pump diesel is horizontal single-casing high head sand pump with wide passage to transfer sand or slurry with big particle size. The wet parts are made of Ni-hard and high-Chrome alloys to ensure long service life. It is widely used for high head and long distance delivering in dredging, sand mining, barge loading and mineral processing etc.
Tobee 18x16 inch gravel pump diesel is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component life, It is mainly suitable for delivering slurry, sand, gravel, sludge, mud, blast slag and other abrasive medium. Especially suitable for the high flow, high concentration and high head working conditions.
Tobee 14x12 inch gravel pump diesel is single-stage single-casing horizontal dredging pump driven by diesel engine through a gearbox, The materials of wear parts are made from high chrome alloy with hardness is no less than 60HRC, adopting grease lubrication for bearings to ensure stable running on the strong frame, It is widely used in the river platform, barges, marine ship or dredger for pumping sands, gravels, slurries, muds, sludges, stones or other big particle solids
Tobee 8/8 inch gravel pump is a kind of cantilevered single-casing centrifugal pump. Pump body is installed with junction plate and cover plate by clamp, which makes the disassembly convenient and quick. The can be equipped with diesel engines or electric motors driven directly, 8x6 Sand Gravel Pump has the advantages of working stability, little vibration, low hydraulic loss, high efficiency, light weight, simple structure and easy maintenance, It is mainly used for dredging river, pipe-jacking system, sucking gravels, blast slag transporting, ore mining etc.
Fine stone concrete pump/mortar pump
Performance Featuresï¼?
1.Adopt the new generation S tube valve to change direction, at the same time equipped with floating wear ring, automatic compensation wear.
2.Anti - pump function to minimize pipe clogging.
3.The important part adds the guard plate, effectively protects the component safety.
4.Equipped with automatic lubrication system, effectively extend the service life of rotating parts.
5.The operation panel is equipped with wireless remote control handle, both panel and remote control can be operated.
6.The whole removable screen is easy to replace.
Turbine flowmeter
Product name:turbine flowmeter
Product code:164912-752
Update time:2015.08.25
Views:346
Processing custom origin:in kaifeng
Type:type flow meter lwg series
Type:impeller type flowmeter
Measuring range:0.4-20000 (m3 / h)
Summary:
Turbine flowmeter can be divided according to function name gas flow meter, flue gas meter, steam flow meter, gas flow meter, compressed air flow meter, liquid flow meter.
Processing custom origin:in kaifeng
Type:type flow meter skld series
Measuring range:2000 (m3 / h)
Level of accuracy:0.5
Nominal diameter:dn3-3000 (mm)
Working pressure:0.6 ~ 4 (mpa)
Working temperature:- 10 - 150
Product overview
Skld type electromagnetic flowm eter is the intelligent electromagnetic with research and development, which adopts domestic and foreign advanced technology. Electromagnetic transducer with high-speed central processing unit (cpu) and the features of rapid computing speed and high precision, reliable performance measurement are in both chinese and english menu.Electromag netic flowmeter is divided into one type of electromagnetic flowmeter and split electromagnetic flowmeter, insert electromagnetic flowmeter.
Electromagnetic flowmeter can be divided according to the use of function:liquid flow meter, water flow meter, sewage flow meter, intelligent electromagnetic flowmeter, explosion-proof flow meter, irrigation flow meter, mud flow meter
Sensor uses non-uniform magnetic field technology and special magnetic circuit structure. Magnetic field is stable and reliable, and the circuit structure reduces the volume, the sensor can reflect the traffic change timely and effectively, and have a stable value of measuring water, sewage, slurry, pulp, acid, alkali, salt slurry liquid and food, etc. There are lots of wide applications in the petroleum chemical industry, metallurgy, coal, water conservancy project of water supply and drainage, sewage treatment etc. The electromagnetic flowmeter has two types: the compact and the sensor for remote transmitter.
Standard orifice flowmeter
Product name:standard orifice flowmeter
Product code:14126-609
Processing custom origin:in kaifeng
Sklgb series models:the throttle device
Type:standard throttling device
Measuring range:implementation of single phase full of pipes, homogeneous liquid, gas and steamflow measurement
Nominal size:dn50-2600
Accuracy of measurement:0.5 to 1.5
Nominal pressure:0.25-20 (mpa)
Scope of application:gas liquid vapor
6013 Industrial Pumps Suppliers
Short on time? Let Industrial Pumps sellers contact you.
